+DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE SEAMA_SIGNATURE
+
+define Build/alfa-network-rootfs-header
+ mkimage \
+ -A mips -O linux -T filesystem -C lzma -a 0 -e 0 \
+ -n 'RootfsImage' -d $@ $@.new
+ @mv $@.new $@
+endef
+
+define Build/append-md5sum-bin
+ $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
+ xargs echo -ne >> $@
+endef
+
+define Build/append-string
+ echo -n $(1) >> $@
+endef
+
+define Build/mkbuffaloimg
+ $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
+ -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
+ -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
+ -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Build/mkwrggimg
+ $(STAGING_DIR_HOST)/bin/mkwrggimg -b \
+ -i $@ -o $@.imghdr -d /dev/mtdblock/1 \
+ -m $(BOARDNAME) -s $(DAP_SIGNATURE) \
+ -v $(VERSION_DIST) -B $(REVISION)
+ mv $@.imghdr $@
+endef
+
+define Build/mkdapimg2
+ $(STAGING_DIR_HOST)/bin/mkdapimg2 \
+ -i $@ -o $@.new \
+ -s $(DAP_SIGNATURE) \
+ -v $(VERSION_DIST)-$(firstword $(subst +, ,$(firstword $(subst -, ,$(REVISION))))) \
+ -r Default \
+ $(if $(1),-k $(1))
+ mv $@.new $@
+endef
+
+define Build/netgear-squashfs
+ rm -rf $@.fs $@.squashfs
+ mkdir -p $@.fs/image
+ cp $@ $@.fs/image/uImage
+ $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
+ $@.fs $@.squashfs \
+ -noappend -root-owned -be -b 65536 \
+ $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
+
+ dd if=/dev/zero bs=1k count=1 >> $@.squashfs
+ mkimage \
+ -A mips -O linux -T filesystem -C none \
+ -M $(NETGEAR_KERNEL_MAGIC) \
+ -a 0xbf070000 -e 0xbf070000 \
+ -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
+ -d $@.squashfs $@
+ rm -rf $@.squashfs $@.fs
+endef
+
+define Build/netgear-uImage
+ $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
+endef
+
+define Build/relocate-kernel
+ rm -rf $@.relocate
+ $(CP) ../../generic/image/relocate $@.relocate
+ $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
+ ( \
+ dd if=$@.relocate/loader.bin bs=32 conv=sync && \
+ perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
+ cat "$@" \
+ ) > "$@.new"
+ mv "$@.new" "$@"
+ rm -rf $@.relocate
+endef
+
+define Build/seama
+ $(STAGING_DIR_HOST)/bin/seama -i $@ $(if $(1),$(1),-m "dev=/dev/mtdblock/1" -m "type=firmware")
+ mv $@.seama $@
+endef
+
+define Build/seama-seal
+ $(call Build/seama,-s $@.seama $(1))
+endef
+
+define Build/teltonika-fw-fake-checksum
+ # Teltonika U-Boot web based firmware upgrade/recovery routine compares
+ # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
+ # from begin of the firmware file) with 16 bytes stored just before
+ # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
+ let \
+ offs="$$(stat -c%s $@) - 20"; \
+ dd if=$@ bs=1 count=16 skip=76 |\
+ dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
+endef
+
+define Build/uImageHiWiFi
+ # Field ih_name needs to start with "tw150v1"
+ mkimage -A $(LINUX_KARCH) \
+ -O linux -T kernel \
+ -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+ -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' -d $@ $@.new
+ @mv $@.new $@
+endef
+
+define Build/wrgg-pad-rootfs
+ $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
+endef
+
+
+define Device/ap121f
+ DEVICE_TITLE := ALFA Network AP121F
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig
+ BOARDNAME := AP121F
+ IMAGE_SIZE := 16064k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ SUPPORTED_DEVICES := ap121f
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += ap121f
+
+define Device/ap531b0
+ DEVICE_TITLE := Rockeetech AP531B0
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := AP531B0
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ap531b0
+
define Device/ap90q
- DEVICE_TITLE := YunCore AP90Q
- BOARDNAME = AP90Q
- IMAGE_SIZE = 16000k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ DEVICE_TITLE := YunCore AP80Q/AP90Q
+ BOARDNAME := AP90Q
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += ap90q
+define Device/ap91-5g
+ DEVICE_TITLE := ALFA Network AP91-5G
+ DEVICE_PACKAGES := rssileds -swconfig
+ BOARDNAME := AP91-5G
+ IMAGE_SIZE := 7744k
+ KERNEL_SIZE := 1600k
+ ROOTFS_SIZE := 6144k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware)
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs |\
+ alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\
+ pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += ap91-5g
+
+define Device/arduino-yun
+ DEVICE_TITLE := Arduino Yun
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := Yun
+ IMAGE_SIZE := 15936k
+ CONSOLE := ttyATH0,250000
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro
+endef
+TARGET_DEVICES += arduino-yun
+
define Device/bsb
DEVICE_TITLE := Smart Electronics Black Swift board
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = BSB
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
+ BOARDNAME := BSB
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
endef
TARGET_DEVICES += bsb
define Device/carambola2
- DEVICE_TITLE := Carambola2 board from 8Devices
+ DEVICE_TITLE := 8devices Carambola2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = CARAMBOLA2
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := CARAMBOLA2
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += carambola2
define Device/cf-e316n-v2
DEVICE_TITLE := COMFAST CF-E316N v2
- BOARDNAME = CF-E316N-V2
- IMAGE_SIZE = 16192k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
+ DEVICE_PACKAGES := -swconfig -uboot-envtools
+ BOARDNAME := CF-E316N-V2
+ IMAGE_SIZE := 16192k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
define Device/cf-e320n-v2
$(Device/cf-e316n-v2)
DEVICE_TITLE := COMFAST CF-E320N v2
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = CF-E320N-V2
+ DEVICE_PACKAGES += kmod-usb-core kmod-usb2
+ BOARDNAME := CF-E320N-V2
endef
TARGET_DEVICES += cf-e320n-v2
+define Device/cf-e355ac-v1
+ DEVICE_TITLE := COMFAST CF-E355AC v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x \
+ -swconfig -uboot-envtools
+ BOARDNAME := CF-E355AC-V1
+ IMAGE_SIZE := 16192k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e355ac-v1
+
+define Device/cf-e355ac-v2
+ $(Device/cf-e355ac-v1)
+ DEVICE_TITLE := COMFAST CF-E355AC v2
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9888 \
+ -swconfig -uboot-envtools
+ BOARDNAME := CF-E355AC-V2
+endef
+TARGET_DEVICES += cf-e355ac-v2
+
+define Device/cf-e375ac
+ DEVICE_TITLE := COMFAST CF-E375AC
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9888 \
+ -uboot-envtools
+ BOARDNAME := CF-E375AC
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e375ac
+
define Device/cf-e380ac-v1
DEVICE_TITLE := COMFAST CF-E380AC v1
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = CF-E380AC-V1
- IMAGE_SIZE = 16128k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x \
+ -swconfig -uboot-envtools
+ BOARDNAME := CF-E380AC-V1
+ IMAGE_SIZE := 16128k
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v1
define Device/cf-e380ac-v2
$(Device/cf-e380ac-v1)
DEVICE_TITLE := COMFAST CF-E380AC v2
- BOARDNAME = CF-E380AC-V2
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
+ BOARDNAME := CF-E380AC-V2
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v2
+define Device/cf-e385ac
+ DEVICE_TITLE := COMFAST CF-E385AC
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9984 \
+ -uboot-envtools
+ BOARDNAME := CF-E385AC
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e385ac
+
define Device/cf-e520n
DEVICE_TITLE := COMFAST CF-E520N
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = CF-E520N
- IMAGE_SIZE = 8000k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig -uboot-envtools
+ BOARDNAME := CF-E520N
+ IMAGE_SIZE := 8000k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e520n
define Device/cf-e530n
$(Device/cf-e520n)
DEVICE_TITLE := COMFAST CF-E530N
- BOARDNAME = CF-E530N
+ BOARDNAME := CF-E530N
endef
TARGET_DEVICES += cf-e530n
+define Device/cpe505n
+ DEVICE_TITLE := P&W CPE505N
+ BOARDNAME := CPE505N
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += cpe505n
+
+define Device/cpe830
+ $(Device/ap90q)
+ DEVICE_TITLE := YunCore CPE830
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME := CPE830
+endef
+TARGET_DEVICES += cpe830
+
define Device/cpe870
DEVICE_TITLE := YunCore CPE870
DEVICE_PACKAGES := rssileds
- BOARDNAME = CPE870
- IMAGE_SIZE = 7936k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
+ BOARDNAME := CPE870
+ IMAGE_SIZE := 7936k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
endef
TARGET_DEVICES += cpe870
-define Device/domywifi-dw33d
- DEVICE_TITLE := DomyWifi DW33D
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k
- BOARDNAME = DW33D
- IMAGE_SIZE = 16000k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware);ar934x-nfc:96m(rootfs_data),32m(backup)ro
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 14528k | append-kernel | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += domywifi-dw33d
-
define Device/dragino2
BOARDNAME := DRAGINO2
CONSOLE := ttyATH0,115200
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
DEVICE_TITLE := Dragino 2 (MS14)
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
endef
TARGET_DEVICES += dragino2
+define Device/e1700ac-v2-16M
+ DEVICE_TITLE := Qxwlan E1700AC v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core \
+ kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := E1700AC-V2
+ SUPPORTED_DEVICES := e1700ac-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e1700ac-v2-16M
+
+define Device/e1700ac-v2-8M
+ $(Device/e1700ac-v2-16M)
+ DEVICE_TITLE := Qxwlan E1700AC v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e1700ac-v2-8M
+
+define Device/e558-v2-16M
+ DEVICE_TITLE := Qxwlan E558 v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := E558-V2
+ SUPPORTED_DEVICES := e558-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e558-v2-16M
+
+define Device/e558-v2-8M
+ $(Device/e558-v2-16M)
+ DEVICE_TITLE := Qxwlan E558 v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e558-v2-8M
+
+define Device/e600g-v2-16M
+ DEVICE_TITLE := Qxwlan E600G v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := E600G-V2
+ SUPPORTED_DEVICES := e600g-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e600g-v2-16M
+
+define Device/e600g-v2-8M
+ $(Device/e600g-v2-16M)
+ DEVICE_TITLE := Qxwlan E600G v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e600g-v2-8M
+
+define Device/e600gac-v2-16M
+ DEVICE_TITLE := Qxwlan E600GAC v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
+ kmod-usb2 -swconfig
+ BOARDNAME := E600GAC-V2
+ SUPPORTED_DEVICES := e600gac-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e600gac-v2-16M
+
+define Device/e600gac-v2-8M
+ $(Device/e600gac-v2-16M)
+ DEVICE_TITLE := Qxwlan E600GAC v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e600gac-v2-8M
+
+define Device/e750a-v4-16M
+ DEVICE_TITLE := Qxwlan E750A v4 (16MB flash)
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := E750A-V4
+ SUPPORTED_DEVICES := e750a-v4
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e750a-v4-16M
+
+define Device/e750a-v4-8M
+ $(Device/e750a-v4-16M)
+ DEVICE_TITLE := Qxwlan E750A v4 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e750a-v4-8M
+
+define Device/ew-balin
+ DEVICE_TITLE := Embedded Wireless Balin Platform
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
+ BOARDNAME := EW-BALIN
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ew-balin
+
+define Device/ew-dorin
+ $(Device/ew-balin)
+ DEVICE_TITLE := Embedded Wireless Dorin Platform
+ BOARDNAME := EW-DORIN
+ CONSOLE := ttyATH0,115200
+endef
+TARGET_DEVICES += ew-dorin
+
+define Device/ew-dorin-router
+ $(Device/ew-dorin)
+ DEVICE_TITLE := Embedded Wireless Dorin Router Platform
+ BOARDNAME := EW-DORIN-ROUTER
+endef
+TARGET_DEVICES += ew-dorin-router
+
+define Device/rme-eg200
+ DEVICE_TITLE := eTactica EG-200
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \
+ kmod-usb-serial kmod-usb-serial-ftdi \
+ kmod-usb-storage \
+ kmod-fs-ext4
+ BOARDNAME := RME-EG200
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += rme-eg200
+
define Device/weio
DEVICE_TITLE := WeIO
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = WEIO
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := WEIO
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += weio
define Device/gl-ar150
- DEVICE_TITLE := GL AR150
+ DEVICE_TITLE := GL.iNet GL-AR150
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-AR150
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := GL-AR150
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar150
define Device/gl-ar300
- DEVICE_TITLE := GL AR300
+ DEVICE_TITLE := GL.iNet GL-AR300
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-AR300
- IMAGE_SIZE = 16000k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := GL-AR300
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300
define Device/gl-ar300m
- DEVICE_TITLE := GL AR300M
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 uboot-envtools
- BOARDNAME = GL-AR300M
- IMAGE_SIZE = 16000k
- CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ DEVICE_TITLE := GL.iNet GL-AR300M
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := GL-AR300M
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300m
+define Device/gl-ar750
+ DEVICE_TITLE := GL.iNet GL-AR750
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
+ kmod-usb2 kmod-usb-storage
+ BOARDNAME := GL-AR750
+ SUPPORTED_DEVICES := gl-ar750
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-ar750
+
define Device/gl-domino
- DEVICE_TITLE := GL Domino Pi
+ DEVICE_TITLE := GL.iNet Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = DOMINO
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := DOMINO
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-domino
define Device/gl-mifi
- DEVICE_TITLE := GL MIFI
+ DEVICE_TITLE := GL.iNet GL-MiFi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-MIFI
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := GL-MIFI
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-mifi
+define Device/gl-usb150
+ DEVICE_TITLE := GL.iNet GL-USB150
+ DEVICE_PACKAGES := -swconfig
+ BOARDNAME := GL-USB150
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ SUPPORTED_DEVICES := gl-usb150
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-usb150
+
+define Device/lan-turtle
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := Hak5 LAN Turtle
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
+ -kmod-ath9k -swconfig -uboot-envtools -wpad-mini
+ BOARDNAME := LAN-TURTLE
+ DEVICE_PROFILE := LANTURTLE
+ TPLINK_HWID := 0x5348334c
+ CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += lan-turtle
+
+define Device/lima
+ DEVICE_TITLE := 8devices Lima
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := LIMA
+ IMAGE_SIZE := 15616k
+ MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
+endef
+TARGET_DEVICES += lima
+
define Device/mr12
DEVICE_TITLE := Meraki MR12
DEVICE_PACKAGES := kmod-spi-gpio
- BOARDNAME = MR12
- IMAGE_SIZE = 15680k
- MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
- IMAGE/kernel.bin = append-kernel
- IMAGE/rootfs.bin = append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 13440k | append-kernel | check-size $$$$(IMAGE_SIZE)
+ BOARDNAME := MR12
+ ROOTFS_SIZE := 13440k
+ IMAGE_SIZE := 15680k
+ MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
+ IMAGE/kernel.bin := append-kernel
+ IMAGE/rootfs.bin := append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
IMAGES := kernel.bin rootfs.bin sysupgrade.bin
endef
TARGET_DEVICES += mr12
define Device/mr16
+ $(Device/mr12)
DEVICE_TITLE := Meraki MR16
- DEVICE_PACKAGES := kmod-spi-gpio
- BOARDNAME = MR16
- IMAGE_SIZE = 15680k
- MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
- IMAGE/kernel.bin = append-kernel
- IMAGE/rootfs.bin = append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 13440k | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGES := kernel.bin rootfs.bin sysupgrade.bin
+ BOARDNAME := MR16
endef
TARGET_DEVICES += mr16
+define Device/dr342
+ DEVICE_TITLE := Wallys DR342
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := DR342
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += dr342
+
+define Device/dr344
+ DEVICE_TITLE := Wallys DR344
+ BOARDNAME := DR344
+ KERNEL_SIZE := 1408k
+ ROOTFS_SIZE := 6336k
+ IMAGE_SIZE := 7744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+endef
+
define Device/dr531
DEVICE_TITLE := Wallys DR531
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = DR531
- IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
+ BOARDNAME := DR531
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += dr531
define Device/wndr3700
DEVICE_TITLE := NETGEAR WNDR3700
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
- BOARDNAME = WNDR3700
- NETGEAR_KERNEL_MAGIC = 0x33373030
- NETGEAR_BOARD_ID = WNDR3700
- IMAGE_SIZE = 7680k
- MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
+ BOARDNAME := WNDR3700
+ NETGEAR_KERNEL_MAGIC := 0x33373030
+ NETGEAR_BOARD_ID := WNDR3700
+ IMAGE_SIZE := 7680k
+ MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img factory-NA.img
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
- IMAGE/default = append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
endef
+TARGET_DEVICES += wndr3700
define Device/wndr3700v2
-$(Device/wndr3700)
+ $(Device/wndr3700)
DEVICE_TITLE := NETGEAR WNDR3700 v2
- NETGEAR_BOARD_ID = WNDR3700v2
- NETGEAR_KERNEL_MAGIC = 0x33373031
- NETGEAR_HW_ID = 29763654+16+64
- IMAGE_SIZE = 15872k
- MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
+ NETGEAR_BOARD_ID := WNDR3700v2
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ NETGEAR_HW_ID := 29763654+16+64
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img
endef
+TARGET_DEVICES += wndr3700v2
define Device/wndr3800
-$(Device/wndr3700v2)
+ $(Device/wndr3700v2)
DEVICE_TITLE := NETGEAR WNDR3800
- NETGEAR_BOARD_ID = WNDR3800
- NETGEAR_HW_ID = 29763654+16+128
+ NETGEAR_BOARD_ID := WNDR3800
+ NETGEAR_HW_ID := 29763654+16+128
endef
+TARGET_DEVICES += wndr3800
define Device/wndr3800ch
-$(Device/wndr3800)
+ $(Device/wndr3800)
DEVICE_TITLE := NETGEAR WNDR3800 (Ch)
- NETGEAR_BOARD_ID = WNDR3800CH
+ NETGEAR_BOARD_ID := WNDR3800CH
endef
+TARGET_DEVICES += wndr3800ch
define Device/wndrmac
-$(Device/wndr3700v2)
+ $(Device/wndr3700v2)
DEVICE_TITLE := NETGEAR WNDRMAC
- NETGEAR_BOARD_ID = WNDRMAC
+ NETGEAR_BOARD_ID := WNDRMAC
endef
+TARGET_DEVICES += wndrmac
define Device/wndrmacv2
-$(Device/wndr3800)
+ $(Device/wndr3800)
DEVICE_TITLE := NETGEAR WNDRMAC v2
- NETGEAR_BOARD_ID = WNDRMACv2
+ NETGEAR_BOARD_ID := WNDRMACv2
endef
-
-TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
+TARGET_DEVICES += wndrmacv2
define Device/cap324
DEVICE_TITLE := PowerCloud CAP324 Cloud AP
- DEVICE_PACKAGES := uboot-envtools
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
- IMAGE_SIZE = 15296k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
+ IMAGE_SIZE := 15296k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
-
TARGET_DEVICES += cap324
define Device/cap324-nocloud
DEVICE_TITLE := PowerCloud CAP324 Cloud AP (No-Cloud)
- DEVICE_PACKAGES := uboot-envtools
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
-
TARGET_DEVICES += cap324-nocloud
define Device/cr3000
DEVICE_TITLE := PowerCloud CR3000 Cloud Router
- DEVICE_PACKAGES := uboot-envtools
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
- IMAGE_SIZE = 7104k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
+ IMAGE_SIZE := 7104k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
-
TARGET_DEVICES += cr3000
define Device/cr3000-nocloud
DEVICE_TITLE := PowerCloud CR3000 (No-Cloud)
- DEVICE_PACKAGES := uboot-envtools
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
- IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
-
TARGET_DEVICES += cr3000-nocloud
define Device/cr5000
DEVICE_TITLE := PowerCloud CR5000 Cloud Router
- DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-core
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
- IMAGE_SIZE = 7104k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
+ IMAGE_SIZE := 7104k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
-
TARGET_DEVICES += cr5000
define Device/cr5000-nocloud
DEVICE_TITLE := PowerCloud CR5000 (No-Cloud)
- DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-core
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
- IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
-
TARGET_DEVICES += cr5000-nocloud
+define Device/packet-squirrel
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := Hak5 Packet Squirrel
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \
+ -kmod-ath9k -swconfig -uboot-envtools -wpad-mini
+ BOARDNAME := PACKET-SQUIRREL
+ DEVICE_PROFILE := PACKETSQUIRREL
+ TPLINK_HWID := 0x5351524c
+ CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += packet-squirrel
+
+define Device/pqi-air-pen
+ DEVICE_TITLE := PQI Air Pen
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+ BOARDNAME := PQI-AIR-PEN
+ IMAGE_SIZE := 7744k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
+endef
+TARGET_DEVICES += pqi-air-pen
+
define Device/antminer-s1
$(Device/tplink-8mlzma)
DEVICE_TITLE := Antminer-S1
TPLINK_HWID := 0x04440101
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += antminer-s1
define Device/antminer-s3
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x04440301
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += antminer-s3
define Device/antrouter-r1
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x44440101
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += antrouter-r1
define Device/el-m150
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x01500101
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += el-m150
define Device/el-mini
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += antminer-s1 antminer-s3 antrouter-r1 el-m150 el-mini
+TARGET_DEVICES += el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += gl-inet-6408A-v1
define Device/gl-inet-6416A-v1
$(Device/tplink-16mlzma)
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
+TARGET_DEVICES += gl-inet-6416A-v1
define Device/jwap230
DEVICE_TITLE := jjPlus JWAP230
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = JWAP230
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ BOARDNAME := JWAP230
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += jwap230
-define Device/rnx-n360rt
- $(Device/tplink-4m)
- DEVICE_TITLE := Rosewill RNX-N360RT
- BOARDNAME := TL-WR941ND
- DEVICE_PROFILE := RNXN360RT
- TPLINK_HWID := 0x09410002
- TPLINK_HWREV := 0x00420001
+define Device/r36a
+ DEVICE_TITLE := ALFA Network R36A
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport -swconfig
+ BOARDNAME := R36A
+ SUPPORTED_DEVICES := r36a
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += r36a
+
+define Device/r602n
+ DEVICE_TITLE := P&W R602N
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := R602N
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += r602n
+
+define Device/rut900
+ DEVICE_TITLE := Teltonika RUT900
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -uboot-envtools
+ BOARDNAME := RUT900
+ SUPPORTED_DEVICES := rut900
+ IMAGE_SIZE := 15552k
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(config)ro,64k(art)ro,15552k(firmware),576k(event-log)ro
+ TPLINK_HWID := 0x35000001
+ TPLINK_HWREV := 0x1
+ TPLINK_HEADER_VERSION := 1
+ KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
+ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
+ pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
+ append-md5sum-bin | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata |\
+ check-size $$$$(IMAGE_SIZE)
endef
-TARGET_DEVICES += rnx-n360rt
+TARGET_DEVICES += rut900
define Device/mc-mac1200r
$(Device/tplink-8mlzma)
- DEVICE_TITLE := MERCURY MAC1200R
+ DEVICE_TITLE := Mercury MAC1200R
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := MC-MAC1200R
DEVICE_PROFILE := MAC1200R
define Device/minibox-v1
$(Device/tplink-16mlzma)
- DEVICE_TITLE := Gainstrong MiniBox V1.0
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_TITLE := GainStrong MiniBox V1.0
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := MINIBOX-V1
DEVICE_PROFILE := MINIBOXV1
TPLINK_HWID := 0x3C000201
CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += minibox-v1
+define Device/oolite-v1
+ $(Device/minibox-v1)
+ DEVICE_TITLE := GainStrong Oolite V1.0
+ BOARDNAME := OOLITE-V1
+ DEVICE_PROFILE := OOLITEV1
+ TPLINK_HWID := 0x3C000101
+endef
+TARGET_DEVICES += oolite-v1
+
+define Device/oolite-v5.2
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := GainStrong Oolite V5.2
+ DEVICE_PACKAGES := ath10k-firmware-qca9887 kmod-ath10k kmod-usb-core kmod-usb2
+ BOARDNAME := OOLITE-V5-2
+ DEVICE_PROFILE := OOLITEV52
+ TPLINK_HWID := 0x3C00010B
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += oolite-v5.2
+
+define Device/oolite-v5.2-dev
+ $(Device/oolite-v5.2)
+ DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board)
+ BOARDNAME := OOLITE-V5-2-DEV
+ DEVICE_PROFILE := OOLITEV52DEV
+endef
+TARGET_DEVICES += oolite-v5.2-dev
+
define Device/omy-g1
$(Device/tplink-16mlzma)
DEVICE_TITLE := OMYlink OMY-G1
DEVICE_PROFILE := OMYG1
TPLINK_HWID := 0x06660101
endef
+TARGET_DEVICES += omy-g1
define Device/omy-x1
$(Device/tplink-8mlzma)
DEVICE_PROFILE := OMYX1
TPLINK_HWID := 0x06660201
endef
-TARGET_DEVICES += omy-g1 omy-x1
+TARGET_DEVICES += omy-x1
define Device/onion-omega
$(Device/tplink-16mlzma)
endef
TARGET_DEVICES += onion-omega
+define Device/sc1750
+ DEVICE_TITLE := Abicom SC1750
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := SC1750
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+endef
+TARGET_DEVICES += sc1750
+
+define Device/sc300m
+ DEVICE_TITLE := Abicom SC300M
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := SC300M
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+endef
+TARGET_DEVICES += sc300m
+
+define Device/sc450
+ DEVICE_TITLE := Abicom SC450
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := SC450
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+endef
+TARGET_DEVICES += sc450
+
define Device/smart-300
$(Device/tplink-8mlzma)
DEVICE_TITLE := NC-LINK SMART-300
endef
TARGET_DEVICES += som9331
+define Device/sr3200
+ DEVICE_TITLE := YunCore SR3200
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME := SR3200
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += sr3200
+
+define Device/xd3200
+ $(Device/sr3200)
+ DEVICE_TITLE := YunCore XD3200
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME := XD3200
+endef
+TARGET_DEVICES += xd3200
+
+define Device/t830
+ DEVICE_TITLE := YunCore T830
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := T830
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ SUPPORTED_DEVICES := t830
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += t830
+
define Device/tellstick-znet-lite
$(Device/tplink-16mlzma)
DEVICE_TITLE := TellStick ZNet Lite
endef
TARGET_DEVICES += tellstick-znet-lite
-define Device/oolite
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Gainstrong OOLITE
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := GS-OOLITE
- DEVICE_PROFILE := OOLITE
- TPLINK_HWID := 0x3C000101
+define Device/ts-d084
+ $(Device/tplink-8mlzma)
+ DEVICE_TITLE := PISEN TS-D084
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := TS-D084
+ DEVICE_PROFILE := TSD084
+ TPLINK_HWID := 0x07030101
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += oolite
+TARGET_DEVICES += ts-d084
+define Device/n5q
+ DEVICE_TITLE := ALFA Network N5Q
+ DEVICE_PACKAGES := rssileds -swconfig
+ BOARDNAME := N5Q
+ SUPPORTED_DEVICES := n5q
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += n5q
define Device/NBG6616
DEVICE_TITLE := ZyXEL NBG6616
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = NBG6616
- KERNEL_SIZE = 2048k
- IMAGE_SIZE = 15323k
- MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
+ BOARDNAME := NBG6616
+ KERNEL_SIZE := 2048k
+ IMAGE_SIZE := 15323k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
CMDLINE += mem=128M
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
- IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
# We cannot currently build a factory image. It is the sysupgrade image
# prefixed with a header (which is actually written into the MTD device).
# The header is 2kiB and is filled with 0xff. The format seems to be:
#
# The header is padded with 0xff to the erase block size of the device.
endef
-
TARGET_DEVICES += NBG6616
define Device/c-55
DEVICE_TITLE := AirTight Networks C-55
DEVICE_PACKAGES := kmod-ath9k
- BOARDNAME = C-55
- KERNEL_SIZE = 2048k
- IMAGE_SIZE = 15872k
- MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
- IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ BOARDNAME := C-55
+ KERNEL_SIZE := 2048k
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
-
TARGET_DEVICES += c-55
-
-define Build/uImageHiWiFi
- # Field ih_name needs to start with "tw150v1"
- mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
- @mv $@.new $@
-endef
-
define Device/hiwifi-hc6361
DEVICE_TITLE := HiWiFi HC6361
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
endef
TARGET_DEVICES += hiwifi-hc6361
-
-define Build/seama
- $(STAGING_DIR_HOST)/bin/seama -i $@ $(if $(1),$(1),-m "dev=/dev/mtdblock/1" -m "type=firmware")
- mv $@.seama $@
-endef
-
-define Build/seama-seal
- $(call Build/seama,-s $@.seama $(1))
-endef
-
define Device/seama
- CONSOLE := ttyS0,115200
LOADER_TYPE := bin
BLOCKSIZE := 64k
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
check-size $$$$(IMAGE_SIZE)
SEAMA_SIGNATURE :=
- DEVICE_VARS += SEAMA_SIGNATURE
endef
define Device/dir-869-a1
-$(Device/seama)
+ $(Device/seama)
DEVICE_TITLE := D-Link DIR-869 rev. A1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = DIR-869-A1
- IMAGE_SIZE = 15872k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ BOARDNAME := DIR-869-A1
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
IMAGE/factory.bin := \
$$(IMAGE/default) | pad-rootfs -x 64 | \
seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
check-size $$$$(IMAGE_SIZE)
endef
+TARGET_DEVICES += dir-869-a1
define Device/mynet-n600
-$(Device/seama)
+ $(Device/seama)
DEVICE_TITLE := Western Digital My Net N600
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = MYNET-N600
- IMAGE_SIZE = 15808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ BOARDNAME := MYNET-N600
+ IMAGE_SIZE := 15808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgnd16_wd_db600
endef
+TARGET_DEVICES += mynet-n600
define Device/mynet-n750
-$(Device/seama)
+ $(Device/seama)
DEVICE_TITLE := Western Digital My Net N750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = MYNET-N750
- IMAGE_SIZE = 15808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ BOARDNAME := MYNET-N750
+ IMAGE_SIZE := 15808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgnd13_wd_av
endef
+TARGET_DEVICES += mynet-n750
define Device/qihoo-c301
-$(Device/seama)
+ $(Device/seama)
DEVICE_TITLE := Qihoo C301
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = QIHOO-C301
- IMAGE_SIZE = 15744k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
+ BOARDNAME := QIHOO-C301
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
endef
+TARGET_DEVICES += qihoo-c301
-TARGET_DEVICES += dir-869-a1 mynet-n600 mynet-n750 qihoo-c301
-
-define Build/mkwrggimg
- $(STAGING_DIR_HOST)/bin/mkwrggimg -b \
- -i $@ -o $@.imghdr -d /dev/mtdblock/1 \
- -m $(BOARDNAME) -s $(DAP_SIGNATURE) \
- -v LEDE -B $(REVISION)
- mv $@.imghdr $@
-endef
-
-define Build/wrgg-pad-rootfs
- $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
+define Device/dap-1330-a1
+ DEVICE_TITLE := D-Link DAP-1330 rev. A1
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME := DAP-1330-A1
+ IMAGES := factory.img sysupgrade.bin
+ IMAGE_SIZE := 7936k
+ IMAGE/factory.img := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkdapimg2 917504
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,64k(mp)ro,64k(config)ro,7936k(firmware)
+ DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330
endef
+TARGET_DEVICES += dap-1330-a1
define Device/dap-2695-a1
DEVICE_TITLE := D-Link DAP-2695 rev. A1
- DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k uboot-envtools
- BOARDNAME = DAP-2695-A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k
+ BOARDNAME := DAP-2695-A1
IMAGES := factory.img sysupgrade.bin
- IMAGE_SIZE = 15360k
- IMAGE/factory.img = append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin = append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE_SIZE := 15360k
+ IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
- MTDPARTS = spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
+ MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
DAP_SIGNATURE := wapac02_dkbs_dap2695
- DEVICE_VARS += DAP_SIGNATURE
endef
-
TARGET_DEVICES += dap-2695-a1
-define Build/mkbuffaloimg
- $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
- -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
- -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
- -i $@ -o $@.new
- mv $@.new $@
-endef
-
define Device/bhr-4grv2
DEVICE_TITLE := Buffalo BHR-4GRV2
BOARDNAME := BHR-4GRV2
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
endef
TARGET_DEVICES += bhr-4grv2
+
+define Device/wam250
+ DEVICE_TITLE := Samsung WAM250
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := WAM250
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),128k(nvram)ro,15872k(firmware),64k(art)ro
+ SUPPORTED_DEVICES := wam250
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += wam250
+
+define Device/wifi-pineapple-nano
+ $(Device/tplink-16mlzma)
+ DEVICE_TITLE := Hak5 WiFi Pineapple NANO
+ DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-core kmod-usb2 kmod-usb-storage \
+ -swconfig -uboot-envtools
+ BOARDNAME := WIFI-PINEAPPLE-NANO
+ DEVICE_PROFILE := WIFIPINEAPPLENANO
+ TPLINK_HWID := 0x4e414e4f
+ CONSOLE := ttyATH0,115200
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += wifi-pineapple-nano
+
+define Device/wlr8100
+ DEVICE_TITLE := Sitecom WLR-8100
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \
+ kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME := WLR8100
+ IMAGE_SIZE := 15424k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,15424k(firmware),256k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(art)ro
+endef
+TARGET_DEVICES += wlr8100
+
+define Device/wpj-16m
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
+ IMAGE_SIZE := 16128k
+endef
+
+define Device/wpj342
+ $(Device/wpj-16m)
+ DEVICE_TITLE := Compex WPJ342 (16MB flash)
+ BOARDNAME := WPJ342
+endef
+TARGET_DEVICES += wpj342
+
+define Device/wpj344
+ $(Device/wpj-16m)
+ DEVICE_TITLE := Compex WPJ344 (16MB flash)
+ BOARDNAME := WPJ344
+ SUPPORTED_DEVICES := wpj344
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += wpj344
+
+define Device/wpj531
+ $(Device/wpj-16m)
+ DEVICE_TITLE := Compex WPJ531 (16MB flash)
+ BOARDNAME := WPJ531
+endef
+TARGET_DEVICES += wpj531
+
+define Device/wpj558
+ $(Device/wpj-16m)
+ DEVICE_TITLE := Compex WPJ558 (16MB flash)
+ BOARDNAME := WPJ558
+ SUPPORTED_DEVICES := wpj558
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += wpj558
+
+define Device/wpj563
+ $(Device/wpj-16m)
+ DEVICE_TITLE := Compex WPJ563 (16MB flash)
+ BOARDNAME := WPJ563
+endef
+TARGET_DEVICES += wpj563
+
+define Device/wrtnode2q
+ DEVICE_TITLE := WRTnode2Q
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+ BOARDNAME := WRTNODE2Q
+ IMAGE_SIZE := 16064k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash)
+endef
+TARGET_DEVICES += wrtnode2q
+
+define Device/zbt-we1526
+ DEVICE_TITLE := Zbtlink ZBT-WE1526
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := ZBT-WE1526
+ IMAGE_SIZE := 16000k
+ KERNEL_SIZE := 1472k
+ ROOTFS_SIZE := 14528k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += zbt-we1526
+
+define Device/AVM
+ DEVICE_PACKAGES := fritz-tffs -uboot-envtools
+ KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
+ KERNEL_INITRAMFS := $$(KERNEL)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
+ append-squashfs-fakeroot-be | pad-to 256 | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+
+define Device/fritz300e
+ $(call Device/AVM)
+ DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
+ DEVICE_PACKAGES += rssileds -swconfig
+ BOARDNAME := FRITZ300E
+ SUPPORTED_DEVICES := fritz300e
+ IMAGE_SIZE := 15232k
+endef
+TARGET_DEVICES += fritz300e
+
+define Device/fritz4020
+ $(call Device/AVM)
+ DEVICE_TITLE := AVM FRITZ!Box 4020
+ DEVICE_PACKAGES += kmod-usb-core kmod-usb2 kmod-usb-storage
+ BOARDNAME := FRITZ4020
+ SUPPORTED_DEVICES := fritz4020
+ IMAGE_SIZE := 15232k
+endef
+TARGET_DEVICES += fritz4020
+
+define Device/fritz450e
+ $(call Device/AVM)
+ DEVICE_TITLE := AVM FRITZ!WLAN Repeater 450E
+ DEVICE_PACKAGES += -swconfig
+ BOARDNAME := FRITZ450E
+ SUPPORTED_DEVICES := fritz450e
+ IMAGE_SIZE := 15232k
+endef
+TARGET_DEVICES += fritz450e
projects / openwrt / openwrt.git / blobdiff