DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE SEAMA_SIGNATURE
+define Build/alfa-network-rootfs-header
+ mkimage \
+ -A mips -O linux -T filesystem -C lzma -a 0 -e 0 \
+ -n 'RootfsImage' -d $@ $@.new
+ @mv $@.new $@
+endef
+
define Build/mkbuffaloimg
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
- -v LEDE -B $(REVISION)
+ -v OpenWrt -B $(REVISION)
mv $@.imghdr $@
endef
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+ -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
@mv $@.new $@
endef
endef
+define Device/ap121f
+ DEVICE_TITLE := ALFA Network AP121F
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig
+ BOARDNAME := AP121F
+ IMAGE_SIZE := 16064k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ SUPPORTED_DEVICES := ap121f
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += ap121f
+
define Device/ap531b0
DEVICE_TITLE := Rockeetech AP531B0
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = AP531B0
+ BOARDNAME := AP531B0
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
define Device/ap90q
DEVICE_TITLE := YunCore AP90Q
- BOARDNAME = AP90Q
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ BOARDNAME := AP90Q
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += ap90q
+define Device/ap91-5g
+ DEVICE_TITLE := ALFA Network AP91-5G
+ DEVICE_PACKAGES := rssileds -swconfig
+ BOARDNAME := AP91-5G
+ IMAGE_SIZE := 7744k
+ KERNEL_SIZE := 1600k
+ ROOTFS_SIZE := 6144k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware)
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs |\
+ alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\
+ pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += ap91-5g
+
+define Device/arduino-yun
+ DEVICE_TITLE := Arduino Yun
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME := Yun
+ IMAGE_SIZE := 15936k
+ CONSOLE = ttyATH0,250000
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro
+endef
+TARGET_DEVICES += arduino-yun
+
define Device/bsb
DEVICE_TITLE := Smart Electronics Black Swift board
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = BSB
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
+ BOARDNAME := BSB
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
endef
TARGET_DEVICES += bsb
define Device/carambola2
DEVICE_TITLE := 8devices Carambola2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = CARAMBOLA2
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := CARAMBOLA2
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += carambola2
define Device/cf-e316n-v2
DEVICE_TITLE := COMFAST CF-E316N v2
- BOARDNAME = CF-E316N-V2
- IMAGE_SIZE = 16192k
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
+ BOARDNAME := CF-E316N-V2
+ IMAGE_SIZE := 16192k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
$(Device/cf-e316n-v2)
DEVICE_TITLE := COMFAST CF-E320N v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = CF-E320N-V2
+ BOARDNAME := CF-E320N-V2
endef
TARGET_DEVICES += cf-e320n-v2
+define Device/cf-e355ac
+ DEVICE_TITLE := COMFAST CF-E355AC
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME := CF-E355AC
+ IMAGE_SIZE := 16192k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e355ac
+
define Device/cf-e380ac-v1
DEVICE_TITLE := COMFAST CF-E380AC v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = CF-E380AC-V1
- IMAGE_SIZE = 16128k
- MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
+ BOARDNAME := CF-E380AC-V1
+ IMAGE_SIZE := 16128k
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v1
define Device/cf-e380ac-v2
$(Device/cf-e380ac-v1)
DEVICE_TITLE := COMFAST CF-E380AC v2
- BOARDNAME = CF-E380AC-V2
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
+ BOARDNAME := CF-E380AC-V2
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v2
define Device/cf-e520n
DEVICE_TITLE := COMFAST CF-E520N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = CF-E520N
- IMAGE_SIZE = 8000k
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
+ BOARDNAME := CF-E520N
+ IMAGE_SIZE := 8000k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e520n
define Device/cf-e530n
$(Device/cf-e520n)
DEVICE_TITLE := COMFAST CF-E530N
- BOARDNAME = CF-E530N
+ BOARDNAME := CF-E530N
endef
TARGET_DEVICES += cf-e530n
define Device/cpe505n
DEVICE_TITLE := P&W CPE505N
- BOARDNAME = CPE505N
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := CPE505N
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += cpe505n
$(Device/ap90q)
DEVICE_TITLE := YunCore CPE830
DEVICE_PACKAGES := rssileds
- BOARDNAME = CPE830
+ BOARDNAME := CPE830
endef
TARGET_DEVICES += cpe830
define Device/cpe870
DEVICE_TITLE := YunCore CPE870
DEVICE_PACKAGES := rssileds
- BOARDNAME = CPE870
- IMAGE_SIZE = 7936k
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
+ BOARDNAME := CPE870
+ IMAGE_SIZE := 7936k
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
endef
TARGET_DEVICES += cpe870
endef
TARGET_DEVICES += dragino2
+define Device/ew-dorin
+ DEVICE_TITLE := Embedded Wireless Dorin Platform
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
+ BOARDNAME = EW-DORIN
+ CONSOLE := ttyATH0,115200
+ IMAGE_SIZE = 16000k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ew-dorin
+
+define Device/ew-dorin-router
+ DEVICE_TITLE := Embedded Wireless Dorin Router Platform
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea
+ BOARDNAME = EW-DORIN-ROUTER
+ CONSOLE := ttyATH0,115200
+ IMAGE_SIZE = 16000k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ew-dorin-router
+
define Device/weio
DEVICE_TITLE := WeIO
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = WEIO
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := WEIO
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += weio
define Device/gl-ar150
- DEVICE_TITLE := GL AR150
+ DEVICE_TITLE := GL.iNet GL-AR150
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-AR150
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := GL-AR150
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar150
define Device/gl-ar300
- DEVICE_TITLE := GL AR300
+ DEVICE_TITLE := GL.iNet GL-AR300
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-AR300
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := GL-AR300
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300
define Device/gl-ar300m
- DEVICE_TITLE := GL AR300M
+ DEVICE_TITLE := GL.iNet GL-AR300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-AR300M
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ BOARDNAME := GL-AR300M
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300m
define Device/gl-domino
- DEVICE_TITLE := GL Domino Pi
+ DEVICE_TITLE := GL.iNet Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = DOMINO
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := DOMINO
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-domino
define Device/gl-mifi
- DEVICE_TITLE := GL MIFI
+ DEVICE_TITLE := GL.iNet GL-MiFi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = GL-MIFI
- IMAGE_SIZE = 16000k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := GL-MIFI
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-mifi
+define Device/gl-usb150
+ DEVICE_TITLE := GL.iNet GL-USB150
+ DEVICE_PACKAGES := -swconfig
+ BOARDNAME := GL-USB150
+ IMAGE_SIZE := 16000k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ SUPPORTED_DEVICES := gl-usb150
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-usb150
+
define Device/lima
DEVICE_TITLE := 8devices Lima
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = LIMA
- IMAGE_SIZE = 15616k
- MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
+ BOARDNAME := LIMA
+ IMAGE_SIZE := 15616k
+ MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
endef
TARGET_DEVICES += lima
define Device/mr12
DEVICE_TITLE := Meraki MR12
DEVICE_PACKAGES := kmod-spi-gpio
- BOARDNAME = MR12
+ BOARDNAME := MR12
ROOTFS_SIZE := 13440k
- IMAGE_SIZE = 15680k
- MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
- IMAGE/kernel.bin = append-kernel
- IMAGE/rootfs.bin = append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE_SIZE := 15680k
+ MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
+ IMAGE/kernel.bin := append-kernel
+ IMAGE/rootfs.bin := append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
IMAGES := kernel.bin rootfs.bin sysupgrade.bin
endef
TARGET_DEVICES += mr12
define Device/mr16
+ $(Device/mr12)
DEVICE_TITLE := Meraki MR16
- DEVICE_PACKAGES := kmod-spi-gpio
- BOARDNAME = MR16
- ROOTFS_SIZE := 13440k
- IMAGE_SIZE = 15680k
- MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
- IMAGE/kernel.bin = append-kernel
- IMAGE/rootfs.bin = append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGES := kernel.bin rootfs.bin sysupgrade.bin
+ BOARDNAME := MR16
endef
TARGET_DEVICES += mr16
+define Device/dr342
+ DEVICE_TITLE := Wallys DR342
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := DR342
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += dr342
+
define Device/dr344
DEVICE_TITLE := Wallys DR344
- BOARDNAME = DR344
+ BOARDNAME := DR344
KERNEL_SIZE := 1408k
ROOTFS_SIZE := 6336k
- IMAGE_SIZE = 7744k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE_SIZE := 7744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
-TARGET_DEVICES += dr344
define Device/dr531
DEVICE_TITLE := Wallys DR531
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = DR531
- IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
+ BOARDNAME := DR531
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += dr531
define Device/wndr3700
DEVICE_TITLE := NETGEAR WNDR3700
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
- BOARDNAME = WNDR3700
- NETGEAR_KERNEL_MAGIC = 0x33373030
- NETGEAR_BOARD_ID = WNDR3700
- IMAGE_SIZE = 7680k
- MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
+ BOARDNAME := WNDR3700
+ NETGEAR_KERNEL_MAGIC := 0x33373030
+ NETGEAR_BOARD_ID := WNDR3700
+ IMAGE_SIZE := 7680k
+ MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img factory-NA.img
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
- IMAGE/default = append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
endef
+TARGET_DEVICES += wndr3700
define Device/wndr3700v2
$(Device/wndr3700)
DEVICE_TITLE := NETGEAR WNDR3700 v2
- NETGEAR_BOARD_ID = WNDR3700v2
- NETGEAR_KERNEL_MAGIC = 0x33373031
- NETGEAR_HW_ID = 29763654+16+64
- IMAGE_SIZE = 15872k
- MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
+ NETGEAR_BOARD_ID := WNDR3700v2
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ NETGEAR_HW_ID := 29763654+16+64
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img
endef
+TARGET_DEVICES += wndr3700v2
define Device/wndr3800
$(Device/wndr3700v2)
DEVICE_TITLE := NETGEAR WNDR3800
- NETGEAR_BOARD_ID = WNDR3800
- NETGEAR_HW_ID = 29763654+16+128
+ NETGEAR_BOARD_ID := WNDR3800
+ NETGEAR_HW_ID := 29763654+16+128
endef
+TARGET_DEVICES += wndr3800
define Device/wndr3800ch
$(Device/wndr3800)
DEVICE_TITLE := NETGEAR WNDR3800 (Ch)
- NETGEAR_BOARD_ID = WNDR3800CH
+ NETGEAR_BOARD_ID := WNDR3800CH
endef
+TARGET_DEVICES += wndr3800ch
define Device/wndrmac
$(Device/wndr3700v2)
DEVICE_TITLE := NETGEAR WNDRMAC
- NETGEAR_BOARD_ID = WNDRMAC
+ NETGEAR_BOARD_ID := WNDRMAC
endef
+TARGET_DEVICES += wndrmac
define Device/wndrmacv2
$(Device/wndr3800)
DEVICE_TITLE := NETGEAR WNDRMAC v2
- NETGEAR_BOARD_ID = WNDRMACv2
+ NETGEAR_BOARD_ID := WNDRMACv2
endef
-TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
+TARGET_DEVICES += wndrmacv2
define Device/cap324
DEVICE_TITLE := PowerCloud CAP324 Cloud AP
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
- IMAGE_SIZE = 15296k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
+ IMAGE_SIZE := 15296k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cap324
DEVICE_TITLE := PowerCloud CAP324 Cloud AP (No-Cloud)
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += cap324-nocloud
DEVICE_TITLE := PowerCloud CR3000 Cloud Router
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
- IMAGE_SIZE = 7104k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
+ IMAGE_SIZE := 7104k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cr3000
DEVICE_TITLE := PowerCloud CR3000 (No-Cloud)
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
- IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += cr3000-nocloud
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
- IMAGE_SIZE = 7104k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
+ IMAGE_SIZE := 7104k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cr5000
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
- IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += cr5000-nocloud
define Device/pqi-air-pen
DEVICE_TITLE := PQI Air Pen
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
- BOARDNAME = PQI-AIR-PEN
- IMAGE_SIZE = 7744k
- CONSOLE = ttyATH0,115200
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
+ BOARDNAME := PQI-AIR-PEN
+ IMAGE_SIZE := 7744k
+ CONSOLE := ttyATH0,115200
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
endef
TARGET_DEVICES += pqi-air-pen
TPLINK_HWID := 0x04440101
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += antminer-s1
define Device/antminer-s3
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x04440301
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += antminer-s3
define Device/antrouter-r1
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x44440101
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += antrouter-r1
define Device/el-m150
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x01500101
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += el-m150
define Device/el-mini
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += antminer-s1 antminer-s3 antrouter-r1 el-m150 el-mini
+TARGET_DEVICES += el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
+TARGET_DEVICES += gl-inet-6408A-v1
define Device/gl-inet-6416A-v1
$(Device/tplink-16mlzma)
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
+TARGET_DEVICES += gl-inet-6416A-v1
define Device/jwap230
DEVICE_TITLE := jjPlus JWAP230
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = JWAP230
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ BOARDNAME := JWAP230
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += jwap230
define Device/r602n
DEVICE_TITLE := P&W R602N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = R602N
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+ BOARDNAME := R602N
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += r602n
-define Device/rnx-n360rt
- $(Device/tplink-4m)
- DEVICE_TITLE := Rosewill RNX-N360RT
- BOARDNAME := TL-WR941ND
- DEVICE_PROFILE := RNXN360RT
- TPLINK_HWID := 0x09410002
- TPLINK_HWREV := 0x00420001
-endef
-TARGET_DEVICES += rnx-n360rt
-
define Device/mc-mac1200r
$(Device/tplink-8mlzma)
DEVICE_TITLE := Mercury MAC1200R
DEVICE_PROFILE := OMYG1
TPLINK_HWID := 0x06660101
endef
+TARGET_DEVICES += omy-g1
define Device/omy-x1
$(Device/tplink-8mlzma)
DEVICE_PROFILE := OMYX1
TPLINK_HWID := 0x06660201
endef
-TARGET_DEVICES += omy-g1 omy-x1
+TARGET_DEVICES += omy-x1
define Device/onion-omega
$(Device/tplink-16mlzma)
define Device/sc1750
DEVICE_TITLE := Abicom SC1750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME = SC1750
- IMAGE_SIZE = 15744k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+ BOARDNAME := SC1750
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
endef
TARGET_DEVICES += sc1750
define Device/sc300m
DEVICE_TITLE := Abicom SC300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME = SC300M
- IMAGE_SIZE = 15744k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+ BOARDNAME := SC300M
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
endef
TARGET_DEVICES += sc300m
define Device/sc450
DEVICE_TITLE := Abicom SC450
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME = SC450
- IMAGE_SIZE = 15744k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+ BOARDNAME := SC450
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
endef
TARGET_DEVICES += sc450
define Device/sr3200
DEVICE_TITLE := YunCore SR3200
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = SR3200
- IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+ BOARDNAME := SR3200
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += sr3200
$(Device/sr3200)
DEVICE_TITLE := YunCore XD3200
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = XD3200
+ BOARDNAME := XD3200
endef
TARGET_DEVICES += xd3200
endef
TARGET_DEVICES += oolite
+define Device/n5q
+ DEVICE_TITLE := ALFA Network N5Q
+ DEVICE_PACKAGES := rssileds -swconfig
+ BOARDNAME := N5Q
+ SUPPORTED_DEVICES := n5q
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += n5q
+
define Device/NBG6616
DEVICE_TITLE := ZyXEL NBG6616
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = NBG6616
- KERNEL_SIZE = 2048k
- IMAGE_SIZE = 15323k
- MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
+ BOARDNAME := NBG6616
+ KERNEL_SIZE := 2048k
+ IMAGE_SIZE := 15323k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
CMDLINE += mem=128M
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
- IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
# We cannot currently build a factory image. It is the sysupgrade image
# prefixed with a header (which is actually written into the MTD device).
# The header is 2kiB and is filled with 0xff. The format seems to be:
define Device/c-55
DEVICE_TITLE := AirTight Networks C-55
DEVICE_PACKAGES := kmod-ath9k
- BOARDNAME = C-55
- KERNEL_SIZE = 2048k
- IMAGE_SIZE = 15872k
- MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
- IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ BOARDNAME := C-55
+ KERNEL_SIZE := 2048k
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += c-55
$(Device/seama)
DEVICE_TITLE := D-Link DIR-869 rev. A1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = DIR-869-A1
- IMAGE_SIZE = 15872k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ BOARDNAME := DIR-869-A1
+ IMAGE_SIZE := 15872k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
IMAGE/factory.bin := \
$$(IMAGE/default) | pad-rootfs -x 64 | \
seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
check-size $$$$(IMAGE_SIZE)
endef
+TARGET_DEVICES += dir-869-a1
define Device/mynet-n600
$(Device/seama)
DEVICE_TITLE := Western Digital My Net N600
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = MYNET-N600
- IMAGE_SIZE = 15808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ BOARDNAME := MYNET-N600
+ IMAGE_SIZE := 15808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgnd16_wd_db600
endef
+TARGET_DEVICES += mynet-n600
define Device/mynet-n750
$(Device/seama)
DEVICE_TITLE := Western Digital My Net N750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- BOARDNAME = MYNET-N750
- IMAGE_SIZE = 15808k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ BOARDNAME := MYNET-N750
+ IMAGE_SIZE := 15808k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgnd13_wd_av
endef
+TARGET_DEVICES += mynet-n750
define Device/qihoo-c301
$(Device/seama)
DEVICE_TITLE := Qihoo C301
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
- BOARDNAME = QIHOO-C301
- IMAGE_SIZE = 15744k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
+ BOARDNAME := QIHOO-C301
+ IMAGE_SIZE := 15744k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
endef
-TARGET_DEVICES += dir-869-a1 mynet-n600 mynet-n750 qihoo-c301
+TARGET_DEVICES += qihoo-c301
define Device/dap-2695-a1
DEVICE_TITLE := D-Link DAP-2695 rev. A1
DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k
- BOARDNAME = DAP-2695-A1
+ BOARDNAME := DAP-2695-A1
IMAGES := factory.img sysupgrade.bin
- IMAGE_SIZE = 15360k
- IMAGE/factory.img = append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin = append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE_SIZE := 15360k
+ IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
- MTDPARTS = spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
+ MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
DAP_SIGNATURE := wapac02_dkbs_dap2695
endef
TARGET_DEVICES += dap-2695-a1
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
endef
TARGET_DEVICES += bhr-4grv2
DEVICE_TITLE := Compex WPJ342 (16MB flash)
BOARDNAME := WPJ342
endef
+TARGET_DEVICES += wpj342
define Device/wpj344
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ344 (16MB flash)
BOARDNAME := WPJ344
+ SUPPORTED_DEVICES := wpj344
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
+TARGET_DEVICES += wpj344
define Device/wpj531
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ531 (16MB flash)
BOARDNAME := WPJ531
endef
+TARGET_DEVICES += wpj531
define Device/wpj558
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ558 (16MB flash)
BOARDNAME := WPJ558
+ SUPPORTED_DEVICES := wpj558
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
+TARGET_DEVICES += wpj558
define Device/wpj563
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ563 (16MB flash)
BOARDNAME := WPJ563
endef
-TARGET_DEVICES += wpj342 wpj344 wpj531 wpj558 wpj563
+TARGET_DEVICES += wpj563
+
+define Device/wrtnode2q
+ DEVICE_TITLE := WRTnode2Q
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+ BOARDNAME := WRTNODE2Q
+ IMAGE_SIZE := 16064k
+ MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash)
+endef
+TARGET_DEVICES += wrtnode2q
define Device/zbt-we1526
DEVICE_TITLE := Zbtlink ZBT-WE1526
KERNEL_SIZE := 1472k
ROOTFS_SIZE := 14528k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += zbt-we1526
+
+define Device/fritz300e
+ DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
+ DEVICE_PACKAGES := fritz-tffs rssileds -swconfig -uboot-envtools
+ BOARDNAME := FRITZ300E
+ SUPPORTED_DEVICES := fritz300e
+ IMAGE_SIZE := 15232k
+ KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
+ IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
+ append-squashfs-fakeroot-be | pad-to 256 | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += fritz300e
projects / openwrt / openwrt.git / blobdiff