+define Device/ap90q
+ DEVICE_TITLE := YunCore AP90Q
+ BOARDNAME = AP90Q
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ap90q
+
define Device/bsb
DEVICE_TITLE := Smart Electronics Black Swift board
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = CF-E316N-V2
IMAGE_SIZE = 16192k
CONSOLE = ttyS0,115200
- MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
+define Device/cf-e320n-v2
+ $(Device/cf-e316n-v2)
+ DEVICE_TITLE := COMFAST CF-E320N v2
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = CF-E320N-V2
+endef
+TARGET_DEVICES += cf-e320n-v2
+
+define Device/cf-e380ac-v1
+ DEVICE_TITLE := COMFAST CF-E380AC v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME = CF-E380AC-V1
+ IMAGE_SIZE = 16128k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e380ac-v1
+
+define Device/cf-e380ac-v2
+ $(Device/cf-e380ac-v1)
+ DEVICE_TITLE := COMFAST CF-E380AC v2
+ BOARDNAME = CF-E380AC-V2
+ IMAGE_SIZE = 16000k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e380ac-v2
+
+define Device/cf-e520n
+ DEVICE_TITLE := COMFAST CF-E520N
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = CF-E520N
+ IMAGE_SIZE = 8000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
+endef
+TARGET_DEVICES += cf-e520n
+
+define Device/cf-e530n
+ $(Device/cf-e520n)
+ DEVICE_TITLE := COMFAST CF-E530N
+ BOARDNAME = CF-E530N
+endef
+TARGET_DEVICES += cf-e530n
+
+define Device/cpe830
+ $(Device/ap90q)
+ DEVICE_TITLE := YunCore CPE830
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME = CPE830
+endef
+TARGET_DEVICES += cpe830
+
+define Device/cpe870
+ DEVICE_TITLE := YunCore CPE870
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME = CPE870
+ IMAGE_SIZE = 7936k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
+endef
+TARGET_DEVICES += cpe870
+
+define Device/dragino2
+ BOARDNAME := DRAGINO2
+ CONSOLE := ttyATH0,115200
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_TITLE := Dragino 2 (MS14)
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
+endef
+TARGET_DEVICES += dragino2
+
define Device/weio
DEVICE_TITLE := WeIO
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
endef
TARGET_DEVICES += gl-ar300
+define Device/gl-ar300m
+ DEVICE_TITLE := GL AR300M
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 uboot-envtools
+ BOARDNAME = GL-AR300M
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += gl-ar300m
+
define Device/gl-domino
DEVICE_TITLE := GL Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
endef
TARGET_DEVICES += gl-domino
+define Device/gl-mifi
+ DEVICE_TITLE := GL MIFI
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = GL-MIFI
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyATH0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += gl-mifi
+
+define Device/mr12
+ DEVICE_TITLE := Meraki MR12
+ DEVICE_PACKAGES := kmod-spi-gpio
+ BOARDNAME = MR12
+ IMAGE_SIZE = 15680k
+ MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
+ IMAGE/kernel.bin = append-kernel
+ IMAGE/rootfs.bin = append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 13440k | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGES := kernel.bin rootfs.bin sysupgrade.bin
+endef
+TARGET_DEVICES += mr12
+
+define Device/mr16
+ DEVICE_TITLE := Meraki MR16
+ DEVICE_PACKAGES := kmod-spi-gpio
+ BOARDNAME = MR16
+ IMAGE_SIZE = 15680k
+ MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
+ IMAGE/kernel.bin = append-kernel
+ IMAGE/rootfs.bin = append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 13440k | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGES := kernel.bin rootfs.bin sysupgrade.bin
+endef
+TARGET_DEVICES += mr16
+
+define Device/dr531
+ DEVICE_TITLE := Wallys DR531
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = DR531
+ IMAGE_SIZE = 7808k
+ MTDPARTS = spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += dr531
+
define Device/wndr3700
DEVICE_TITLE := NETGEAR WNDR3700
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev kmod-leds-wndr3700-usb
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
BOARDNAME = WNDR3700
NETGEAR_KERNEL_MAGIC = 0x33373030
NETGEAR_BOARD_ID = WNDR3700
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img factory-NA.img
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
- IMAGE/default = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
+ IMAGE/default = append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
IMAGE_SIZE = 15296k
- MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cap324
define Device/cap324-nocloud
- DEVICE_TITLE := PowerCloud CAP324 Cloud AP
+ DEVICE_TITLE := PowerCloud CAP324 Cloud AP (No-Cloud)
DEVICE_PACKAGES := uboot-envtools
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
IMAGE_SIZE = 16000k
- MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,16000k(firmware),64k(art)
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += cap324-nocloud
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
IMAGE_SIZE = 7104k
- MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cr3000
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7808k(firmware),64k(art)
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += cr3000-nocloud
define Device/cr5000
DEVICE_TITLE := PowerCloud CR5000 Cloud Router
- DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev kmod-usb-core
+ DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
IMAGE_SIZE = 7104k
- MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cr5000
define Device/cr5000-nocloud
DEVICE_TITLE := PowerCloud CR5000 (No-Cloud)
- DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev kmod-usb-core
+ DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
IMAGE_SIZE = 7808k
- MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7808k(firmware),64k(art)
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += cr5000-nocloud
endef
TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
+define Device/jwap230
+ DEVICE_TITLE := jjPlus JWAP230
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ BOARDNAME = JWAP230
+ IMAGE_SIZE = 16000k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += jwap230
+
define Device/rnx-n360rt
$(Device/tplink-4m)
DEVICE_TITLE := Rosewill RNX-N360RT
define Device/mc-mac1200r
$(Device/tplink-8mlzma)
DEVICE_TITLE := MERCURY MAC1200R
- DEVICE_PACKAGES := kmod-ath10k
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := MC-MAC1200R
DEVICE_PROFILE := MAC1200R
TPLINK_HWID := 0x12000001
define Device/minibox-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := Gainstrong MiniBox V1.0
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := MINIBOX-V1
DEVICE_PROFILE := MINIBOXV1
TPLINK_HWID := 0x3C000201
endef
TARGET_DEVICES += onion-omega
+define Device/sc300m
+ DEVICE_TITLE := Abicom SC300M
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME = SC300M
+ IMAGE_SIZE = 15744k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
+endef
+TARGET_DEVICES += sc300m
+
define Device/smart-300
$(Device/tplink-8mlzma)
DEVICE_TITLE := NC-LINK SMART-300
endef
TARGET_DEVICES += som9331
+define Device/sr3200
+ DEVICE_TITLE := YunCore SR3200
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME = SR3200
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += sr3200
+
+define Device/xd3200
+ $(Device/sr3200)
+ DEVICE_TITLE := YunCore XD3200
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME = XD3200
+endef
+TARGET_DEVICES += xd3200
+
define Device/tellstick-znet-lite
$(Device/tplink-16mlzma)
DEVICE_TITLE := TellStick ZNet Lite
define Device/oolite
$(Device/tplink-16mlzma)
DEVICE_TITLE := Gainstrong OOLITE
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := GS-OOLITE
DEVICE_PROFILE := OOLITE
TPLINK_HWID := 0x3C000101
define Device/NBG6616
DEVICE_TITLE := ZyXEL NBG6616
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
BOARDNAME = NBG6616
KERNEL_SIZE = 2048k
IMAGE_SIZE = 15323k
CMDLINE += mem=128M
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
- IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
# We cannot currently build a factory image. It is the sysupgrade image
# prefixed with a header (which is actually written into the MTD device).
# The header is 2kiB and is filled with 0xff. The format seems to be:
KERNEL_SIZE = 2048k
IMAGE_SIZE = 15872k
MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
- IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += c-55
TARGET_DEVICES += hiwifi-hc6361
-# The pre-filled 64 bytes consist of
-# - 28 bytes seama_header
-# - 36 bytes of META data (4-bytes aligned)
-define Build/seama-factory
- ( dd if=/dev/zero bs=64 count=1; cat $(word 1,$^) ) >$@.loader.tmp
- ( dd if=$@.loader.tmp bs=64k conv=sync; dd if=$(word 2,$^) ) >$@.tmp.0
- tail -c +65 $@.tmp.0 >$@.tmp.1
- $(STAGING_DIR_HOST)/bin/seama \
- -i $@.tmp.1 \
- -m "dev=/dev/mtdblock/1" -m "type=firmware"
- $(STAGING_DIR_HOST)/bin/seama \
- -s $@ \
- -m "signature=$(1)" \
- -i $@.tmp.1.seama
- rm -f $@.loader.tmp $@.tmp.*
-endef
-
-define Build/seama-sysupgrade
- $(STAGING_DIR_HOST)/bin/seama \
- -i $(word 1,$^) \
- -m "dev=/dev/mtdblock/1" -m "type=firmware"
- ( dd if=$(word 1,$^).seama bs=64k conv=sync; dd if=$(word 2,$^) ) >$@
- rm -f $(word 1,$^).seama
-endef
-
-define Build/seama-initramfs
- $(STAGING_DIR_HOST)/bin/seama \
- -i $@ \
- -m "dev=/dev/mtdblock/1" -m "type=firmware"
+define Build/seama
+ $(STAGING_DIR_HOST)/bin/seama -i $@ $(if $(1),$(1),-m "dev=/dev/mtdblock/1" -m "type=firmware")
mv $@.seama $@
endef
-define Build/seama-pad-rootfs
- $(STAGING_DIR_HOST)/bin/padjffs2 $(word 2,$^) -c 64 >>$@
+define Build/seama-seal
+ $(call Build/seama,-s $@.seama $(1))
endef
define Device/seama
CONSOLE := ttyS0,115200
LOADER_TYPE := bin
- KERNEL := kernel-bin | lzma | loader-kernel-cmdline | lzma
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama-initramfs
+ BLOCKSIZE := 64k
+ KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
+ KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := seama-sysupgrade $$$$(SEAMA_SIGNATURE) | seama-pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := seama-factory $$$$(SEAMA_SIGNATURE) | seama-pad-rootfs | check-size $$$$(IMAGE_SIZE)
+
+ # 64 bytes offset:
+ # - 28 bytes seama_header
+ # - 36 bytes of META data (4-bytes aligned)
+ IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
+ IMAGE/sysupgrade.bin := \
+ $$(IMAGE/default) | seama | pad-rootfs | \
+ check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := \
+ $$(IMAGE/default) | seama | pad-rootfs | \
+ seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
+ check-size $$$$(IMAGE_SIZE)
SEAMA_SIGNATURE :=
DEVICE_VARS += SEAMA_SIGNATURE
endef
+define Device/dir-869-a1
+$(Device/seama)
+ DEVICE_TITLE := D-Link DIR-869 rev. A1
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ BOARDNAME = DIR-869-A1
+ IMAGE_SIZE = 15872k
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
+ SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
+ IMAGE/factory.bin := \
+ $$(IMAGE/default) | pad-rootfs -x 64 | \
+ seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
+ check-size $$$$(IMAGE_SIZE)
+endef
+
define Device/mynet-n600
$(Device/seama)
DEVICE_TITLE := Western Digital My Net N600
define Device/qihoo-c301
$(Device/seama)
DEVICE_TITLE := Qihoo C301
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME = QIHOO-C301
IMAGE_SIZE = 15744k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
endef
-TARGET_DEVICES += mynet-n600 mynet-n750 qihoo-c301
+TARGET_DEVICES += dir-869-a1 mynet-n600 mynet-n750 qihoo-c301
+
+define Build/mkwrggimg
+ $(STAGING_DIR_HOST)/bin/mkwrggimg -b \
+ -i $@ -o $@.imghdr -d /dev/mtdblock/1 \
+ -m $(BOARDNAME) -s $(DAP_SIGNATURE) \
+ -v LEDE -B $(REVISION)
+ mv $@.imghdr $@
+endef
+
+define Build/wrgg-pad-rootfs
+ $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
+endef
+
+define Device/dap-2695-a1
+ DEVICE_TITLE := D-Link DAP-2695 rev. A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k uboot-envtools
+ BOARDNAME = DAP-2695-A1
+ IMAGES := factory.img sysupgrade.bin
+ IMAGE_SIZE = 15360k
+ IMAGE/factory.img = append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin = append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
+ MTDPARTS = spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
+ DAP_SIGNATURE := wapac02_dkbs_dap2695
+ DEVICE_VARS += DAP_SIGNATURE
+endef
+
+TARGET_DEVICES += dap-2695-a1
+
+define Build/mkbuffaloimg
+ $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
+ -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
+ -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
+ -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Device/bhr-4grv2
+ DEVICE_TITLE := Buffalo BHR-4GRV2
+ BOARDNAME := BHR-4GRV2
+ ROOTFS_SIZE := 14528k
+ KERNEL_SIZE := 1472k
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg
+endef
+TARGET_DEVICES += bhr-4grv2
projects / openwrt / openwrt.git / blobdiff