-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -$(STAGING_DIR_HOST)/bin/mkfwimage \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@
# all UBNT XM device expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
- dd if=$@ of=$@.old1 bs=1024k count=1
- dd if=$@ of=$@.old2 bs=1024k skip=1
+ -[ -f $@ ] && ( \
+ dd if=$@ of=$@.old1 bs=1024k count=1; \
+ dd if=$@ of=$@.old2 bs=1024k skip=1; \
$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
- -o $@
- rm $@.old1 $@.old2
+ -o $@; \
+ rm $@.old1 $@.old2 )
endef
define Build/mkubntimage2
- $(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
+ -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$@ \
-o $@.new
@mv $@.new $@
endef
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-define Device/ubnt-xm
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
+define Device/ubnt
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
- UBNT_TYPE := XM
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_BOARD := XM
- UBNT_CHIP := ar7240
IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
+endef
+
+define Device/ubnt-xm
+ $(Device/ubnt)
+ DEVICE_PACKAGES += kmod-usb-ohci
+ UBNT_TYPE := XM
+ UBNT_CHIP := ar7240
endef
define Device/ubnt-xw
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
+ $(Device/ubnt)
UBNT_TYPE := XW
- UBNT_BOARD := XM
UBNT_CHIP := ar934x
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-bz
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
+ $(Device/ubnt)
UBNT_TYPE := BZ
- UBNT_BOARD := XM
- UBNT_CHIP := ar934x
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-unifiac
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ UBNT_CHIP := ar7240
endef
define Device/rw2458n
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi
BOARDNAME := UBNT-UF
- DEVICE_PROFILE := UBNT UBNTUNIFI
+ DEVICE_PROFILE += UBNTUNIFI
+endef
+
+define Device/ubnt-unifiac
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ DEVICE_PROFILE := UBNT
+ IMAGE_SIZE := 7744k
+ MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-unifiac-lite
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
- DEVICE_PROFILE := UBNT UBNTUNIFIACLITE
+ DEVICE_PROFILE += UBNTUNIFIACLITE
BOARDNAME := UBNT-UF-AC-LITE
endef
+define Device/ubnt-unifiac-mesh
+ $(Device/ubnt-unifiac-lite)
+ DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
+endef
+
define Device/ubnt-unifiac-pro
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT UBNTUNIFIACPRO
+ DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x
+ DEVICE_PROFILE += UBNTUNIFIACPRO
BOARDNAME := UBNT-UF-AC-PRO
endef
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi Outdoor
BOARDNAME := UBNT-U20
- DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
+ DEVICE_PROFILE += UBNTUNIFIOUTDOOR
endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-mesh ubnt-unifiac-pro ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M TI
BOARDNAME := UBNT-RM-TI
UBNT_TYPE := TI
- UBNT_BOARD := XM
endef
TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway
BOARDNAME := UBNT-AGW
- UBNT_BOARD := XM
UBNT_TYPE := AirGW
UBNT_CHIP := ar933x
- CONSOLE = ttyATH0,115200
+ CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += ubnt-air-gateway
define Device/ubnt-air-gateway-pro
$(Device/ubnt-xm)
BOARDNAME := UBNT-AGWP
UBNT_TYPE := AirGWP
UBNT_CHIP := ar934x
- CONSOLE = ttyS0,115200
endef
-TARGET_DEVICES += ubnt-air-gateway-pro
define Device/ubdev01
$(Device/ubnt-xm)
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
BOARDNAME := UBNT-UF
UBNT_BOARD := UBDEV01
- UBNT_TYPE := XM
- UBNT_CHIP := ar7240
endef
-
-TARGET_DEVICES += ubdev01
+TARGET_DEVICES += ubnt-air-gateway ubnt-air-gateway-pro ubdev01
define Device/ubnt-routerstation
- DEVICE_TITLE := Ubiquiti RouterStation
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
+ DEVICE_PROFILE := UBNT
IMAGE_SIZE := 16128k
IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
endef
define Device/ubnt-rs
-$(Device/ubnt-routerstation)
+ $(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation
BOARDNAME := UBNT-RS
- DEVICE_PROFILE := Madwifi UBNT UBNTRS
+ DEVICE_PROFILE += UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
endef
define Device/ubnt-rspro
-$(Device/ubnt-routerstation)
+ $(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation Pro
BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
+ DEVICE_PROFILE += UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
define Device/ubnt-ls-sr71
-$(Device/ubnt-routerstation)
+ $(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti LS-SR71
BOARDNAME := UBNT-LS-SR71
- DEVICE_PROFILE := Madwifi UBNT
UBNT_BOARD := LS-SR71
UBNT_TYPE := LS-SR71
UBNT_CHIP := ar7100
endef
-
TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71
define Device/ubnt-uap-pro
DEVICE_PROFILE := UBNT UAPPRO
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
endef
define Device/ubnt-unifi-outdoor-plus
-$(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Pro
+ $(Device/ubnt-uap-pro)
+ DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
UBNT_CHIP := ar7240
BOARDNAME := UBNT-UOP
DEVICE_PROFILE := UBNT
endef
-
-TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus
projects / openwrt / openwrt.git / blobdiff