--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,206 @@
+@@ -16,24 +16,213 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
-+ ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
-+ ATH79_MACH_ANTMINER_S3, /* Bitmain Antminer S3 */
++ ATH79_MACH_ANTMINER_S1, /* Antminer S1 */
++ ATH79_MACH_ANTMINER_S3, /* Antminer S3 */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
++ ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
+ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
++ ATH79_MACH_DLAN_HOTSPOT, /* devolo dLAN Hotspot */
+ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */
+ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/
+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
++ ATH79_MACH_NBG6616, /* Zyxel NBG6616 */
+ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
+ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */
+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
+ ATH79_MACH_OM2P, /* OpenMesh OM2P */
+ ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */
+ ATH79_MACH_OM5P, /* OpenMesh OM5P */
++ ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
+ ATH79_MACH_PB42, /* Atheros PB42 */
+ ATH79_MACH_PB92, /* Atheros PB92 */
+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
++ ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
++ ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
+ ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
++ ATH79_MACH_WEIO, /* WeIO board */
+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +95,1097 @@ config ATH79_MACH_AP121
+@@ -11,62 +95,1125 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_DLAN_HOTSPOT
++ bool "devolo dLAN Hotspot support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_DLAN_PRO_500_WP
+ bool "devolo dLAN pro 500 Wireless+ support"
+ select SOC_AR934X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_ONION_OMEGA
++ bool "ONION OMEGA support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_MR12
+ bool "Meraki MR12 board support"
+ select SOC_AR724X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-
--config ATH79_MACH_AP136
-- bool "Atheros AP136/AP135 reference board"
-- select SOC_QCA955X
++
+config ATH79_MACH_TL_WA7210N_V2
+ bool "TP-LINK TL-WA7210N v2 support"
+ select SOC_AR724X
+ bool "TP-LINK TL-WA830RE v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_NFC
-- select ATH79_DEV_SPI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 or AP135 reference boards.
-
--config ATH79_MACH_AP81
-- bool "Atheros AP81 reference board"
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_WA901ND
+ bool "TP-LINK TL-WA901ND/TL-WA7510N support"
+ select SOC_AR724X
+
+config ATH79_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3500
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP81 reference board.
-
--config ATH79_MACH_DB120
-- bool "Atheros DB120 reference board"
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros DB120 reference board.
-
--config ATH79_MACH_PB44
-- bool "Atheros PB44 reference board"
-+config ATH79_MACH_TL_WR703N
-+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
-+ select SOC_AR933X
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
-+config ATH79_MACH_TL_WR720N_V3
-+ bool "TP-LINK TL-WR720N v3/v4 support"
++config ATH79_MACH_TL_WR703N
++ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-+
+
+-config ATH79_MACH_AP136
+- bool "Atheros AP136/AP135 reference board"
+- select SOC_QCA955X
++config ATH79_MACH_TL_WR720N_V3
++ bool "TP-LINK TL-WR720N v3/v4 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_NFC
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP136 or AP135 reference boards.
+
+-config ATH79_MACH_AP81
+- bool "Atheros AP81 reference board"
+- select SOC_AR913X
+config ATH79_MACH_TL_WR741ND
+ bool "TP-LINK TL-WR741ND support"
+ select SOC_AR724X
+config ATH79_MACH_TL_WR741ND_V4
+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR841N_V1
-+ bool "TP-LINK TL-WR841N v1 support"
- select SOC_AR71XX
-+ select ATH79_DEV_DSA
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP81 reference board.
+
+-config ATH79_MACH_DB120
+- bool "Atheros DB120 reference board"
++config ATH79_MACH_TL_WR841N_V1
++ bool "TP-LINK TL-WR841N v1 support"
++ select SOC_AR71XX
++ select ATH79_DEV_DSA
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
-+config ATH79_MACH_TL_WR1041N_V2
-+ bool "TP-LINK TL-WR1041N v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
++config ATH79_MACH_TL_WR941ND_V6
++ bool "TP-LINK TL-WR941ND v6 support"
++ select SOC_QCA956X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_TL_WR1041N_V2
++ bool "TP-LINK TL-WR1041N v2 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+- select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros DB120 reference board.
+
+-config ATH79_MACH_PB44
+- bool "Atheros PB44 reference board"
+config ATH79_MACH_TL_WR1043ND
+ bool "TP-LINK TL-WR1043ND support"
+ select SOC_AR913X
+
+config ATH79_MACH_TEW_673GRU
+ bool "TRENDnet TEW-673GRU support"
-+ select SOC_AR71XX
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_NVRAM
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1202,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1230,116 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
++config ATH79_MACH_WEIO
++ bool "WeIO board"
++ select SOC_AR933X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_MYNET_N600
+ bool "WD My Net N600 board support"
+ select SOC_AR934X
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_NBG6716
-+ bool "Zyxel NBG6716 board support"
++ bool "Zyxel NBG6616/NBG6716 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_CF_E316N_V2
++ bool "COMFAST CF-E316N v2 board"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_BHU_BXU2000N2_A
+ bool "BHU BXU2000n-2 rev. A support"
+ select SOC_AR934X
endmenu
config SOC_AR71XX
-@@ -134,7 +1344,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1391,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1377,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1424,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,132 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,137 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o
+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o
+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
+obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
++obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o
+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
+obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
-@@ -130,6 +130,13 @@ void __init prom_init(void)
+@@ -136,6 +136,13 @@ void __init prom_init(void)
initrd_end = initrd_start + fw_getenvl("initrd_size");
}
#endif
projects / openwrt / openwrt.git / blobdiff