ath79: Add support for Ubiquiti Nanostation M (XW)

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 004ab59573f50dfc02debca5e6d2af0045e5bf0a..9a7f2d6472b78b8a50f2e71e6a6db9c90f382205 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -10,7 +10,9 @@ ath79_setup_interfaces()
 
        case "$board" in
        avm,fritz300e|\
+       devolo,dvl1200i|\
        devolo,dvl1750c|\
+       devolo,dvl1750i|\
        ocedo,koala|\
        ocedo,raccoon|\
        pcs,cap324|\
@@ -35,6 +37,7 @@ ath79_setup_interfaces()
                ucidef_set_interface_lan "eth0"
                ;;
        avm,fritz4020|\
+       pcs,cr3000|\
        tplink,archer-c58-v1|\
        tplink,archer-c59-v1)
                ucidef_set_interface_wan "eth0"
@@ -59,7 +62,8 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
                ;;
-       devolo,dvl1200e)
+       devolo,dvl1200e|\
+       devolo,dvl1750e)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
        dlink,dir-825-b1)
@@ -69,14 +73,13 @@ ath79_setup_interfaces()
                ;;
        dlink,dir-825-c1|\
        dlink,dir-835-a1|\
-       iodata,etg3-r|\
-       iodata,wn-ac1167dgr|\
-       iodata,wn-ac1600dgr2|\
-       iodata,wn-ag300dgr|\
-       pcs,cr5000)
+       dlink,dir-859-a1|\
+       tplink,archer-c2-v3|\
+       tplink,tl-wr1043nd-v4)
                ucidef_add_switch "switch0" \
-                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
                ;;
+       elecom,wrc-1750ghbk2-i|\
        elecom,wrc-300ghbk2-i)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
@@ -85,14 +88,34 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
                ;;
+       engenius,ews511ap)
+               ucidef_set_interface_lan "eth0 eth1" "dhcp"
+               ;;
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
-       glinet,ar150|\
-       glinet,ar300m|\
-       glinet,gl-x750)
+       glinet,gl-ar150|\
+       glinet,gl-ar300m-nand|\
+       glinet,gl-ar300m-nor|\
+       glinet,gl-x750|\
+       tplink,tl-wr810n-v1|\
+       tplink,tl-wr810n-v2|\
+       ubnt,routerstation)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
+       glinet,gl-ar750s)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+               ;;
+       iodata,etg3-r|\
+       iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr|\
+       iodata,wn-ac1600dgr2|\
+       iodata,wn-ag300dgr|\
+       pcs,cr5000)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+       ;;
        nec,wg800hp)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
@@ -109,15 +132,11 @@ ath79_setup_interfaces()
                ucidef_add_switch_port_attr "switch0" 5 led 2
                ;;
        netgear,wnr612-v2|\
-       on,n150r)
+       on,n150r|\
+       tplink,tl-wr841-v7)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
-               "0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
-               ;;
-       pcs,cr3000)
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
-               ucidef_set_interface_wan "eth0"
+               "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
        phicomm,k2t)
                ucidef_add_switch "switch0" \
@@ -127,6 +146,7 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:wan"
                ;;
+       tplink,archer-c5-v1|\
        tplink,archer-c7-v1|\
        tplink,archer-c7-v2|\
        tplink,tl-wdr4900-v2)
@@ -136,13 +156,16 @@ ath79_setup_interfaces()
        buffalo,whr-g301n|\
        tplink,tl-mr3220-v1|\
        tplink,tl-mr3420-v1|\
-       tplink,tl-wr841-v7|\
+       tplink,tl-wr841-v9|\
+       tplink,tl-wr841-v11|\
        ubnt,airrouter)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
        tplink,archer-a7-v5|\
+       tplink,archer-c6-v2|\
+       tplink,archer-c7-v4|\
        tplink,archer-c7-v5|\
        tplink,tl-wdr3600|\
        tplink,tl-wdr4300)
@@ -158,10 +181,6 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
                ;;
-       tplink,tl-wr1043nd-v4)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-               ;;
        tplink,tl-wr2543-v1)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
@@ -176,37 +195,38 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
-       tplink,tl-wr740nd-v4|\
+       tplink,tl-wr740n-v4|\
+       tplink,tl-wr741nd-v4|\
+       tplink,tl-wr841-v8|\
        tplink,tl-wr842n-v1|\
        tplink,tl-wr842n-v2)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
                ;;
-       tplink,tl-wr741nd-v4|\
-       tplink,tl-wr841-v9|\
-       tplink,tl-wr841-v11)
-               ucidef_set_interface_wan "eth0"
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-               ;;
        tplink,tl-wr941-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
-       ubnt,routerstation)
-               ucidef_set_interfaces_lan_wan "eth1" "eth0"
-               ;;
        ubnt,routerstation-pro)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
                        "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
+       ubnt,nanostation-m-xw)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "5:lan" "1:wan"
+               ;;
        ubnt,nanostation-ac|\
        ubnt,unifiac-mesh-pro|\
        ubnt,unifiac-pro)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:wan"
                ;;
+       xiaomi,mi-router-4q)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "3:lan:1" "4:lan:2"
+               ;;
        *)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ;;
@@ -234,14 +254,26 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_text "mac" 4)
                wan_mac=$(mtd_get_mac_text "mac" 24)
                ;;
+       dlink,dir-859-a1)
+               lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+               wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+               ;;
+       elecom,wrc-1750ghbk2-i|\
        elecom,wrc-300ghbk2-i)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
                ;;
+       engenius,ews511ap)
+               lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
+               eth1_mac=$(macaddr_add "$lan_mac" 1)
+               ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
+               ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
+               ;;
        iodata,etg3-r)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(macaddr_add "$lan_mac" -1)
                ;;
        iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr|\
        iodata,wn-ac1600dgr2|\
        iodata,wn-ag300dgr)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
@@ -264,6 +296,10 @@ ath79_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 0)
                lan_mac=$(macaddr_setbit_la "$wan_mac")
                ;;
+       tplink,archer-c7-v4)
+               base_mac=$(mtd_get_mac_binary config 8)
+               wan_mac=$(macaddr_add "$base_mac" 1)
+               ;;
        tplink,tl-wr1043nd-v4)
                base_mac=$(mtd_get_mac_binary product-info 8)
                wan_mac=$(macaddr_add "$base_mac" 1)