ath79: add support for TP-Link Archer C6 v2

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 6626d99af803cd40a38f4b5cd9ba19eebd0823f1..e24c58e208f8ae5e52acadf9421f8604b6c7f735 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -10,24 +10,37 @@ ath79_setup_interfaces()
 
        case "$board" in
        avm,fritz300e|\
+       devolo,dvl1750c|\
        ocedo,koala|\
        ocedo,raccoon|\
        pcs,cap324|\
        pisen,wmm003n|\
+       pqi,air-pen|\
        tplink,re450-v2|\
        tplink,tl-mr10u|\
        tplink,tl-mr3020-v1|\
        tplink,tl-mr3040-v2|\
+       tplink,tl-wa901nd-v2|\
        tplink,tl-wr703n|\
        ubnt,bullet-m|\
+       ubnt,bullet-m-xw|\
+       ubnt,lap-120|\
        ubnt,nanostation-ac-loco|\
        ubnt,rocket-m|\
        ubnt,unifiac-lite|\
        ubnt,unifiac-mesh|\
        ubnt,unifi|\
-       wd,mynet-wifi-rangeextender)
+       wd,mynet-wifi-rangeextender|\
+       winchannel,wb2000)
                ucidef_set_interface_lan "eth0"
                ;;
+       avm,fritz4020|\
+       tplink,archer-c58-v1|\
+       tplink,archer-c59-v1)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+               ;;
        buffalo,bhr-4grv|\
        buffalo,wzr-hp-g450h)
                ucidef_add_switch "switch0" \
@@ -46,11 +59,25 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
                ;;
+       devolo,dvl1200e)
+               ucidef_set_interface_lan "eth0 eth1"
+               ;;
        dlink,dir-825-b1)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
                ;;
+       dlink,dir-825-c1|\
+       dlink,dir-835-a1|\
+       iodata,etg3-r|\
+       iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr2|\
+       iodata,wn-ag300dgr|\
+       pcs,cr5000)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+               ;;
+       elecom,wrc-1750ghbk2-i|\
        elecom,wrc-300ghbk2-i)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
@@ -59,20 +86,27 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
                ;;
+       engenius,ews511ap)
+               ucidef_set_interface_lan "eth0 eth1" "dhcp"
+               ;;
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
-       avm,fritz4020|\
-       glinet,ar150|\
-       glinet,ar300m)
+       glinet,gl-ar150|\
+       glinet,gl-ar300m-nand|\
+       glinet,gl-ar300m-nor|\
+       glinet,gl-x750|\
+       tplink,tl-wr810n-v1|\
+       tplink,tl-wr810n-v2)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
-       iodata,etg3-r|\
-       iodata,wn-ac1167dgr|\
-       iodata,wn-ac1600dgr2|\
-       pcs,cr5000)
+       glinet,ar750s)
                ucidef_add_switch "switch0" \
-                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+                       "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+               ;;
+       nec,wg800hp)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
                ;;
        netgear,wndr3700|\
        netgear,wndr3700v2|\
@@ -100,6 +134,10 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan:1" "5:lan:2" "4:wan"
                ;;
+       rosinson,wr818)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:wan"
+               ;;
        tplink,archer-c7-v1|\
        tplink,archer-c7-v2|\
        tplink,tl-wdr4900-v2)
@@ -109,11 +147,15 @@ ath79_setup_interfaces()
        buffalo,whr-g301n|\
        tplink,tl-mr3220-v1|\
        tplink,tl-mr3420-v1|\
-       tplink,tl-wr841-v7)
+       tplink,tl-wr841-v7|\
+       ubnt,airrouter)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
+       tplink,archer-a7-v5|\
+       tplink,archer-c6-v2|\
+       tplink,archer-c7-v5|\
        tplink,tl-wdr3600|\
        tplink,tl-wdr4300)
                ucidef_add_switch "switch0" \
@@ -128,6 +170,7 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
                ;;
+       dlink,dir-859-a1|\
        tplink,tl-wr1043nd-v4)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
@@ -147,6 +190,13 @@ ath79_setup_interfaces()
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
        tplink,tl-wr740nd-v4|\
+       tplink,tl-wr841-v8|\
+       tplink,tl-wr842n-v1|\
+       tplink,tl-wr842n-v2)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+               ;;
        tplink,tl-wr741nd-v4|\
        tplink,tl-wr841-v9|\
        tplink,tl-wr841-v11)
@@ -154,11 +204,6 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
-       tplink,tl-wr842n-v2)
-               ucidef_set_interface_wan "eth0"
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
-               ;;
        tplink,tl-wr941-v2)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
@@ -198,18 +243,39 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_text "caldata" 65440)
                wan_mac=$(mtd_get_mac_text "caldata" 65460)
                ;;
+       dlink,dir-825-c1|\
+       dlink,dir-835-a1)
+               lan_mac=$(mtd_get_mac_text "mac" 4)
+               wan_mac=$(mtd_get_mac_text "mac" 24)
+               ;;
+       dlink,dir-859-a1)
+               lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+               wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+               ;;
+       elecom,wrc-1750ghbk2-i|\
        elecom,wrc-300ghbk2-i)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
                ;;
+       engenius,ews511ap)
+               lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
+               eth1_mac=$(macaddr_add "$lan_mac" 1)
+               ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
+               ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
+               ;;
        iodata,etg3-r)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(macaddr_add "$lan_mac" -1)
                ;;
        iodata,wn-ac1167dgr|\
-       iodata,wn-ac1600dgr2)
+       iodata,wn-ac1600dgr2|\
+       iodata,wn-ag300dgr)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                ;;
+       nec,wg800hp)
+               lan_mac=$(mtd_get_mac_text board_data 640)
+               wan_mac=$(mtd_get_mac_text board_data 1152)
+               ;;
        netgear,wndr3700|\
        netgear,wndr3700v2|\
        netgear,wndr3800)
@@ -219,6 +285,10 @@ ath79_setup_macs()
                lan_mac=$(k2t_get_mac "lan_mac")
                wan_mac=$(k2t_get_mac "wan_mac")
                ;;
+       rosinson,wr818)
+               wan_mac=$(mtd_get_mac_binary factory 0)
+               lan_mac=$(macaddr_setbit_la "$wan_mac")
+               ;;
        tplink,tl-wr1043nd-v4)
                base_mac=$(mtd_get_mac_binary product-info 8)
                wan_mac=$(macaddr_add "$base_mac" 1)