ath79: add support for OCEDO Ursus

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 5ab427f8ce6ec004922d10650fbc6f0a72d5b8d9..e399210b2bc40425a1fb654d3e4e803056123ae9 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -19,6 +19,8 @@ ath79_setup_interfaces()
        pcs,cap324|\
        pisen,wmm003n|\
        pqi,air-pen|\
+       tplink,cpe210-v2|\
+       tplink,cpe210-v3|\
        tplink,re350k-v1|\
        tplink,re450-v2|\
        tplink,tl-mr10u|\
@@ -29,6 +31,7 @@ ath79_setup_interfaces()
        ubnt,bullet-m|\
        ubnt,bullet-m-xw|\
        ubnt,lap-120|\
+       ubnt,nanobeam-ac|\
        ubnt,nanostation-ac-loco|\
        ubnt,rocket-m|\
        ubnt,unifiac-lite|\
@@ -64,8 +67,20 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
                ;;
+       comfast,cf-e5|\
+       glinet,gl-ar150|\
+       glinet,gl-ar300m-nand|\
+       glinet,gl-ar300m-nor|\
+       glinet,gl-x750|\
+       tplink,tl-wr810n-v1|\
+       tplink,tl-wr810n-v2|\
+       ubnt,routerstation|\
+       yuncore,a770)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ;;
        devolo,dvl1200e|\
-       devolo,dvl1750e)
+       devolo,dvl1750e|\
+       ocedo,ursus)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
        dlink,dir-825-b1)
@@ -76,6 +91,7 @@ ath79_setup_interfaces()
        dlink,dir-825-c1|\
        dlink,dir-835-a1|\
        dlink,dir-859-a1|\
+       engenius,epg5000|\
        tplink,archer-c2-v3|\
        tplink,tl-wr1043nd-v4)
                ucidef_add_switch "switch0" \
@@ -96,16 +112,6 @@ ath79_setup_interfaces()
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
-       glinet,gl-ar150|\
-       glinet,gl-ar300m-nand|\
-       glinet,gl-ar300m-nor|\
-       glinet,gl-x750|\
-       tplink,tl-wr810n-v1|\
-       tplink,tl-wr810n-v2|\
-       ubnt,routerstation|\
-       yuncore,a770)
-               ucidef_set_interfaces_lan_wan "eth1" "eth0"
-               ;;
        glinet,gl-ar750s)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
@@ -123,6 +129,13 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:wan" "6@eth1" "4:lan"
        ;;
+       nec,wg1200cr|\
+       ubnt,nanostation-ac|\
+       ubnt,unifiac-mesh-pro|\
+       ubnt,unifiac-pro)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan" "3:wan"
+               ;;
        nec,wg800hp)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
@@ -175,7 +188,8 @@ ath79_setup_interfaces()
        tplink,archer-c7-v4|\
        tplink,archer-c7-v5|\
        tplink,tl-wdr3600|\
-       tplink,tl-wdr4300)
+       tplink,tl-wdr4300|\
+       tplink,tl-wr941n-v7-cn)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
                ;;
@@ -202,6 +216,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
+       tplink,tl-wr710n-v1)
+               ucidef_set_interface_wan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "3:lan"
+               ;;
        tplink,tl-wr740n-v4|\
        tplink,tl-wr741nd-v4|\
        tplink,tl-wr841-v8|\
@@ -223,12 +242,6 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:lan" "1:wan"
                ;;
-       ubnt,nanostation-ac|\
-       ubnt,unifiac-mesh-pro|\
-       ubnt,unifiac-pro)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "2:lan" "3:wan"
-               ;;
        xiaomi,mi-router-4q)
                ucidef_set_interface_wan "eth0"
                ucidef_add_switch "switch0" \
@@ -261,7 +274,8 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_text "mac" 4)
                wan_mac=$(mtd_get_mac_text "mac" 24)
                ;;
-       dlink,dir-859-a1)
+       dlink,dir-859-a1|\
+       nec,wg1200cr)
                lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
                wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
                ;;
@@ -269,6 +283,14 @@ ath79_setup_macs()
        elecom,wrc-300ghbk2-i)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
                ;;
+       engenius,epg5000|\
+       iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr|\
+       iodata,wn-ac1600dgr2|\
+       iodata,wn-ag300dgr)
+               lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+               wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+               ;;
        engenius,ews511ap)
                lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
                eth1_mac=$(macaddr_add "$lan_mac" 1)
@@ -279,12 +301,9 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(macaddr_add "$lan_mac" -1)
                ;;
-       iodata,wn-ac1167dgr|\
-       iodata,wn-ac1600dgr|\
-       iodata,wn-ac1600dgr2|\
-       iodata,wn-ag300dgr)
-               lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-               wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+       jjplus,ja76pf2)
+               wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;
        nec,wg800hp)
                lan_mac=$(mtd_get_mac_text board_data 640)
@@ -311,7 +330,8 @@ ath79_setup_macs()
                base_mac=$(mtd_get_mac_binary product-info 8)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;
-       tplink,tl-wr941-v2)
+       tplink,tl-wr941-v2|\
+       tplink,tl-wr941n-v7-cn)
                base_mac=$(mtd_get_mac_binary u-boot 130048)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;