ath79: use caldata patching for Archer C58/C59

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 2bbe5923bc35093b9855ef495586830a597db05f..7fe19c0604bbdad2cb383e6e4444b74c423a72f5 100644 (file)
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,5 +1,23 @@
 #!/bin/sh
 
+. /lib/functions/k2t.sh
+
+# xor multiple hex values of the same length
+xor() {
+       local val
+       local ret="0x$1"
+       local retlen=${#1}
+
+       shift
+       while [ -n "$1" ]; do
+               val="0x$1"
+               ret=$((ret ^ val))
+               shift
+       done
+
+       printf "%0${retlen}x" "$ret"
+}
+
 ath10kcal_die() {
        echo "ath10cal: " "$*"
        exit 1
@@ -36,6 +54,29 @@ ath10kcal_patch_mac() {
        macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
 }
 
+ath10kcal_patch_mac_crc() {
+       local mac=$1
+       local mac_offset=6
+       local chksum_offset=2
+       local xor_mac
+       local xor_fw_mac
+       local xor_fw_chksum
+
+       xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+       xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+       ath10kcal_patch_mac "$mac" && {
+               xor_mac=${mac//:/}
+               xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+               xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+               xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+               printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+                       dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+       }
+}
+
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
 . /lib/functions.sh
@@ -46,10 +87,76 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
+       devolo,dvl1200e|\
+       devolo,dvl1750c)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1)
+               ;;
+       dlink,dir-859-a1)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+               ;;
+       glinet,ar750s|\
+       tplink,re450-v2)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+               ;;
+       glinet,gl-x750)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+               ;;
+       iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr2)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+               ;;
+       nec,wg800hp)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
+               ;;
+       ocedo,koala)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
+               ;;
        openmesh,om5p-ac-v2)
                ath10kcal_extract "ART" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
+       tplink,archer-c7-v2)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
+               ;;
+       tplink,archer-a7-v5|\
+       tplink,archer-c7-v5)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+               ;;
+       ubnt,unifiac-lite|\
+       ubnt,unifiac-mesh|\
+       ubnt,unifiac-mesh-pro|\
+       ubnt,lap-120|\
+       ubnt,nanostation-ac|\
+       ubnt,nanostation-ac-loco|\
+       ubnt,unifiac-pro)
+               ath10kcal_extract "EEPROM" 20480 2116
+               ;;
+       esac
+       ;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+       case $board in
+       phicomm,k2t)
+               ath10kcal_extract "art" 20480 12064
+               ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               ;;
+       tplink,archer-c58-v1|\
+       tplink,archer-c59-v1)
+               ath10kcal_extract "art" 20480 12064
+               ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               ;;
        esac
        ;;
 *)