#!/bin/sh
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$2
- local count=$3
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
- dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
-ath10kcal_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
+ath10kcal_patch_mac() {
+ local mac=$1
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
+ [ -z "$mac" ] && return
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
+ macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1
}
-ath10kcal_patch_mac() {
+ath10kcal_patch_mac_crc() {
local mac=$1
+ local mac_offset=6
+ local chksum_offset=2
+ local xor_mac
+ local xor_fw_mac
+ local xor_fw_chksum
- [ -z "$mac" ] && return
+ xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+ xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-}
+ ath10kcal_patch_mac "$mac" && {
+ xor_mac=${mac//:/}
+ xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
+ xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+ xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
-. /lib/functions.sh
-. /lib/functions/system.sh
+ printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+ dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
+ }
+}
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ comfast,cf-wr650ac-v1|\
+ comfast,cf-wr650ac-v2|\
+ yuncore,a770)
+ caldata_extract "art" 0x5000 0x844
+ ;;
+ devolo,dvl1200e|\
+ devolo,dvl1200i|\
+ devolo,dvl1750c|\
+ devolo,dvl1750e|\
+ devolo,dvl1750i|\
+ devolo,dvl1750x)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
+ ;;
+ dlink,dir-859-a1)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
+ ;;
+ elecom,wrc-1750ghbk2-i)
+ caldata_extract "art" 0x5000 0x844
+ ;;
+ engenius,ecb1750)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
+ ;;
+ engenius,epg5000|\
+ iodata,wn-ac1167dgr|\
+ iodata,wn-ac1600dgr2)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+ ;;
+ engenius,ews511ap)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+ ;;
+ glinet,gl-ar750|\
+ glinet,gl-ar750s)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
+ ;;
+ glinet,gl-x750)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+ ;;
+ nec,wg800hp)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
+ ;;
+ ocedo,koala|\
+ ocedo,ursus)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
+ ;;
openmesh,om5p-ac-v2)
- ath10kcal_extract "ART" 20480 2116
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ qihoo,c301)
+ caldata_extract "radiocfg" 0x5000 0x844
+ ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
+ ;;
+ tplink,archer-a7-v5|\
+ tplink,archer-c2-v3|\
+ tplink,archer-c7-v4|\
+ tplink,archer-c7-v5|\
+ tplink,archer-c25-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
+ ;;
+ tplink,archer-c5-v1|\
+ tplink,archer-c7-v2)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
+ ;;
+ tplink,archer-d50-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+ ;;
+ tplink,re350k-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+ ;;
+ tplink,re355-v1|\
+ tplink,re450-v1)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+ ;;
+ tplink,re450-v2)
+ caldata_extract "art" 0x5000 0x844
+ ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+ ;;
+ ubnt,unifiac-lite|\
+ ubnt,unifiac-mesh|\
+ ubnt,unifiac-mesh-pro|\
+ ubnt,lap-120|\
+ ubnt,nanobeam-ac|\
+ ubnt,nanostation-ac|\
+ ubnt,nanostation-ac-loco|\
+ ubnt,unifiac-pro)
+ caldata_extract "EEPROM" 0x5000 0x844
+ ;;
+ esac
+ ;;
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+ case $board in
+ comfast,cf-e313ac)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
+ ;;
+ dlink,dir-842-c1|\
+ dlink,dir-842-c2|\
+ dlink,dir-842-c3|\
+ nec,wg1200cr)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ netgear,ex6400|\
+ netgear,ex7300)
+ caldata_extract "caldata" 0x5000 0x2f20
+ ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
+ ;;
+ phicomm,k2t)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ tplink,archer-c58-v1|\
+ tplink,archer-c59-v1|\
+ tplink,archer-c59-v2|\
+ tplink,archer-c60-v1|\
+ tplink,archer-c60-v2|\
+ tplink,archer-c6-v2)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
esac
;;
*)
projects / openwrt / openwrt.git / blobdiff