ath79: Fix support for TP-LINK Archer C7 v2

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9558_tl-archer-c7.dtsi

diff --git a/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi b/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
index 08b8e9257c0d8b60d698cb3c51b0a0f3dda6a311..546a5e33c3dac22584890945f0eadb1744e7fd69 100644 (file)
--- a/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
+++ b/target/linux/ath79/dts/qca9558_tl-archer-c7.dtsi
@@ -15,7 +15,7 @@
                led-status = &system;
        };
 
-       leds {
+       gpio_leds: leds {
                compatible = "gpio-leds";
 
                system: system {
@@ -40,7 +40,7 @@
                        linux,default-trigger = "usbport";
                };
 
-               wlan2g {
+               led_wlan2g: wlan2g {
                        label = "tp-link:green:wlan2g";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        default-state = "off";
@@ -52,16 +52,9 @@
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
-
-               wlan5g {
-                       label = "tp-link:green:wlan5g";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy0tpt";
-               };
        };
 
-       keys {
+       gpio_keys: keys {
                compatible = "gpio-keys";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -72,12 +65,6 @@
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
-
-               rfkill: wifi {
-                       linux,code = <KEY_RFKILL>;
-                       linux,input-type = <EV_SW>;
-                       debounce-interval = <60>;
-               };
        };
 
        gpio-export {
@@ -148,27 +135,10 @@
                reg = <0>;
                spi-max-frequency = <25000000>;
 
-               partitions {
+               mtdparts: partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;
-
-                       uboot: partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "firmware";
-                               reg = <0x020000 0xfd0000>;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
                };
        };
 };
@@ -192,27 +162,23 @@
        };
 };
 
-&mdio1 {
-       status = "okay";
-
-       phy1: ethernet-phy@1 {
-               reg = <1>;
-       };
-};
-
 &eth0 {
        status = "okay";
 
        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <1>;
        phy-handle = <&phy0>;
+
+       gmac-config {
+               device = <&gmac>;
+               rgmii-enabled = <1>;
+       };
 };
 
 &eth1 {
        status = "okay";
 
        mtd-mac-address = <&uboot 0x1fc00>;
-       phy-handle = <&phy1>;
 
        fixed-link {
                speed = <1000>;