ath79: add support for Ubiquiti UniFi AC-Pro
[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_ubnt_unifiac-lite.dts
index ff24338ca017d4bb9bc4a7bd9ec9273dd48ccdba..6b872561ed44dc7760d4d5deea384fca3b2c3969 100644 (file)
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_ubnt_unifiac.dtsi"
 
 / {
        compatible = "ubnt,unifiac-lite", "qca,qca9563";
        model = "Ubiquiti UniFi-AC-LITE/MESH/LR";
-
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               wifi_ac {
-                       label = "ubnt:white:dome";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               wifi_n {
-                       label = "ubnt:blue:dome";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy1tpt";
-               };
-
-       };
-
-       keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reset {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&pcie {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x060000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "u-boot-env";
-                               reg = <0x060000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               label = "firmware";
-                               reg = <0x070000 0x790000>;
-                       };
-
-                       partition@800000 {
-                               label = "ubnt-airos";
-                               reg = <0x800000 0x790000>;
-                               read-only;
-                       };
-
-                       partition@f90000 {
-                               label = "bs";
-                               reg = <0xf90000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@fb0000 {
-                               label = "cfg";
-                               reg = <0xfb0000 0x040000>;
-                               read-only;
-                       };
-
-                       eeprom: partition@ff0000 {
-                               label = "EEPROM";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
 };
 
 &mdio0 {
        mtd-mac-address = <&eeprom 0x0>;
        phy-handle = <&phy4>;
 };
-
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&eeprom 0x1000>;
-       mtd-mac-address = <&eeprom 0x0>;
-};