ath79: add support for Compex WPJ558 (16M)

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 4b74565..e45d1aa
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 
 . /lib/functions/system.sh
 . /lib/functions/uci-defaults.sh
@@ -11,7 +10,10 @@ ath79_setup_interfaces()
        case "$board" in
        adtran,bsap1800-v2|\
        adtran,bsap1840|\
+       allnet,all-wap02860ac|\
        alfa-network,ap121f|\
+       alfa-network,pi-wifi4|\
+       arduino,yun|\
        aruba,ap-105|\
        avm,fritz1750e|\
        avm,fritz300e|\
@@ -22,14 +24,33 @@ ath79_setup_interfaces()
        devolo,dvl1750c|\
        devolo,dvl1750i|\
        devolo,dvl1750x|\
+       dlink,dap-1330-a1|\
+       dlink,dap-1365-a1|\
+       dlink,dap-2230-a1|\
+       dlink,dap-2660-a1|\
+       dlink,dap-2680-a1|\
+       dlink,dap-3320-a1|\
        dlink,dir-505|\
+       engenius,eap1200h|\
+       engenius,eap600|\
+       engenius,ecb1200|\
        engenius,ecb1750|\
+       engenius,ecb600|\
        enterasys,ws-ap3705i|\
        glinet,gl-ar300m-lite|\
+       glinet,gl-usb150|\
+       hak5,wifi-pineapple-nano|\
+       meraki,mr16|\
        netgear,ex6400|\
        netgear,ex7300|\
        ocedo,koala|\
        ocedo,raccoon|\
+       openmesh,mr600-v1|\
+       openmesh,mr600-v2|\
+       openmesh,mr900-v1|\
+       openmesh,mr900-v2|\
+       openmesh,mr1750-v1|\
+       openmesh,mr1750-v2|\
        pcs,cap324|\
        pisen,ts-d084|\
        pisen,wmb001n|\
@@ -41,12 +62,17 @@ ath79_setup_interfaces()
        tplink,cpe510-v3|\
        tplink,cpe610-v1|\
        tplink,cpe610-v2|\
+       tplink,eap225-outdoor-v1|\
+       tplink,eap225-v3|\
+       tplink,eap245-v1|\
        tplink,re350k-v1|\
        tplink,re355-v1|\
        tplink,re450-v1|\
        tplink,re450-v2|\
        tplink,re450-v3|\
+       tplink,re455-v1|\
        tplink,tl-wr902ac-v1|\
+       ubnt,bullet-ac|\
        ubnt,bullet-m-ar7240|\
        ubnt,bullet-m-ar7241|\
        ubnt,bullet-m-xw|\
@@ -60,6 +86,10 @@ ath79_setup_interfaces()
        ubnt,picostation-m|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2|\
+       ubnt,powerbeam-m2-xw|\
+       ubnt,powerbeam-m5-xw|\
+       ubnt,powerbridge-m|\
+       ubnt,rocket-5ac-lite|\
        ubnt,rocket-m|\
        ubnt,unifiac-lite|\
        ubnt,unifiac-lr|\
@@ -69,6 +99,29 @@ ath79_setup_interfaces()
        winchannel,wb2000)
                ucidef_set_interface_lan "eth0"
                ;;
+       airtight,c-75)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:wan" "3:lan" "6@eth1"
+               ;;
+       alfa-network,ap121fe)
+               ucidef_set_interface_lan "eth0 usb0"
+               ;;
+       alfa-network,n2q|\
+       alfa-network,n5q|\
+       devolo,dvl1200e|\
+       devolo,dvl1750e|\
+       engenius,enstationac-v1|\
+       engenius,ews511ap|\
+       ocedo,ursus|\
+       ubnt,unifi-ap-outdoor-plus)
+               ucidef_set_interface_lan "eth0 eth1"
+               ;;
+       atheros,db120)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+               ucidef_add_switch "switch1" \
+                       "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
+               ;;
        avm,fritz4020|\
        pcs,cr3000|\
        tplink,archer-c58-v1|\
@@ -78,6 +131,16 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
                ;;
+       belkin,f9j1108-v2|\
+       belkin,f9k1115-v2|\
+       tplink,archer-c5-v1|\
+       tplink,archer-c7-v1|\
+       tplink,archer-c7-v2|\
+       tplink,tl-wdr4900-v2|\
+       tplink,tl-wdr7500-v3)
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
+               ;;
        buffalo,bhr-4grv|\
        buffalo,wzr-hp-g450h)
                ucidef_add_switch "switch0" \
@@ -88,6 +151,7 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
                ;;
+       buffalo,wzr-600dhp|\
        buffalo,wzr-hp-ag300h|\
        tplink,archer-c25-v1|\
        tplink,archer-c60-v1|\
@@ -101,6 +165,13 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
+       buffalo,wzr-hp-g300nh-rb|\
+       buffalo,wzr-hp-g300nh-s|\
+       dlink,dir-825-b1)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+               ;;
        buffalo,wzr-hp-g302h-a1a0)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
@@ -108,6 +179,13 @@ ath79_setup_interfaces()
        comfast,cf-e110n-v2|\
        comfast,cf-e120a-v3|\
        comfast,cf-e314n-v2|\
+       compex,wpj531-16m|\
+       openmesh,a40|\
+       openmesh,a60|\
+       openmesh,om2p-v4|\
+       openmesh,om2p-hs-v4|\
+       plasmacloud,pa300|\
+       plasmacloud,pa300e|\
        tplink,cpe210-v1|\
        tplink,cpe220-v2|\
        tplink,cpe220-v3|\
@@ -120,32 +198,49 @@ ath79_setup_interfaces()
        ubnt,routerstation)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
-       comfast,cf-e560ac)
+       comfast,cf-e375ac)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:wan" "2:lan"
+               ;;
+       comfast,cf-e560ac|\
+       qca,ap143-8m|\
+       qca,ap143-16m|\
+       tplink,tl-wr841hp-v3)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
        comfast,cf-wr650ac-v1|\
-       comfast,cf-wr650ac-v2)
+       comfast,cf-wr650ac-v2|\
+       zyxel,nbg6616)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
                ;;
-       devolo,dvl1200e|\
-       devolo,dvl1750e|\
-       ocedo,ursus)
-               ucidef_set_interface_lan "eth0 eth1"
+       compex,wpj344-16m|\
+       compex,wpj563)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "3:lan" "2:wan"
+               ;;
+       compex,wpj558-16m)
+               ucidef_add_switch "switch0" \
+                       "1:wan" "5:lan" "6@eth0"
                ;;
+       devolo,dlan-pro-1200plus-ac|\
        devolo,magic-2-wifi)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:wan" "3:lan" "4:lan"
                ;;
        dlink,dap-2695-a1)
-               ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan" "3:wan" "6@eth1"
                ;;
-       dlink,dir-825-b1)
-               ucidef_set_interface_wan "eth1"
+       dlink,dap-3662-a1)
                ucidef_add_switch "switch0" \
-                       "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+                       "0@eth0" "1:lan:2" "2:lan:1" "6@eth1"
+               ;;
+       dlink,dch-g020-a1)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:2" "2:lan:1"
                ;;
        dlink,dir-825-c1|\
        dlink,dir-835-a1|\
@@ -154,6 +249,7 @@ ath79_setup_interfaces()
        dlink,dir-842-c3|\
        dlink,dir-859-a1|\
        engenius,epg5000|\
+       sitecom,wlr-7100|\
        tplink,archer-c2-v3|\
        tplink,tl-wr1043nd-v4|\
        tplink,tl-wr1043n-v5)
@@ -170,8 +266,14 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
                ;;
-       engenius,ews511ap)
-               ucidef_set_interface_lan "eth0 eth1" "dhcp"
+       engenius,eap300-v2)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan"
+               ;;
+       engenius,ens202ext-v1)
+               ucidef_set_interface_lan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan"
                ;;
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
@@ -181,29 +283,67 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan"
                ;;
+       glinet,gl-x300b)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "4:lan"
+               ;;
        iodata,etg3-r|\
        iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr|\
        iodata,wn-ac1600dgr2|\
        iodata,wn-ag300dgr|\
        pcs,cr5000|\
-       sitecom,wlr-7100|\
        wd,mynet-n750)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
                ;;
+       joyit,jt-or750i)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
        librerouter,librerouter-v1)
                ucidef_add_switch "switch0" \
                        "0@eth0" "5:wan" "6@eth1" "4:lan"
                ;;
+       meraki,mr12)
+               ucidef_set_interface_lan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan"
+               ;;
+       mercury,mw4530r-v1|\
+       tplink,archer-a7-v5|\
+       tplink,archer-c6-v2|\
+       tplink,archer-c6-v2-us|\
+       tplink,archer-c7-v4|\
+       tplink,archer-c7-v5|\
+       tplink,tl-wdr3600-v1|\
+       tplink,tl-wdr4300-v1|\
+       tplink,tl-wdr4300-v1-il|\
+       tplink,tl-wdr4310-v1)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+               ;;
+       nec,wf1200cr)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan"
+               ;;
        nec,wg1200cr|\
+       qxwlan,e1700ac-v2-8m|\
+       qxwlan,e1700ac-v2-16m|\
+       qxwlan,e750g-v8-8m|\
+       qxwlan,e750g-v8-16m|\
+       ubnt,nanobeam-ac-gen2|\
        ubnt,nanostation-ac|\
        yuncore,a782|\
        yuncore,xd4200)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:wan"
                ;;
-       nec,wg800hp)
+       nec,wg800hp|\
+       xiaomi,aiot-ac2350)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
                ;;
@@ -236,6 +376,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan" "3:lan"
                ;;
+       qxwlan,e558-v2-8m|\
+       qxwlan,e558-v2-16m)
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan"
+               ;;
        rosinson,wr818)
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:wan"
@@ -246,25 +391,6 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
-       tplink,archer-a7-v5|\
-       tplink,archer-c6-v2|\
-       tplink,archer-c6-v2-us|\
-       tplink,archer-c7-v4|\
-       tplink,archer-c7-v5|\
-       tplink,tl-wdr3600-v1|\
-       tplink,tl-wdr4300-v1|\
-       tplink,tl-wdr4300-v1-il|\
-       tplink,tl-wdr4310-v1)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
-               ;;
-       tplink,archer-c5-v1|\
-       tplink,archer-c7-v1|\
-       tplink,archer-c7-v2|\
-       tplink,tl-wdr4900-v2)
-               ucidef_add_switch "switch0" \
-                       "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
-               ;;
        tplink,archer-d50-v1)
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
@@ -274,12 +400,29 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth1" "3:lan:3" "4:lan:2" "5:lan:1" "6@eth0" "2:wan:4" "1:wan:5"
                ;;
+       tplink,eap225-wall-v2)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+               ;;
+       tplink,eap245-v3)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:1" "5:lan:2"
+               ;;
        tplink,tl-mr6400-v1)
                ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
                ;;
-       tplink,tl-wr842n-v2)
+       tplink,tl-wpa8630-v1|\
+       tplink,tl-wpa8630p-v2-int|\
+       tplink,tl-wpa8630p-v2.0-eu|\
+       tplink,tl-wpa8630p-v2.1-eu)
+               # port 5 (internal) is the power-line port
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+               ;;
+       tplink,tl-wr842n-v2|\
+       tplink,tl-wr941hp-v1)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
@@ -298,7 +441,11 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
                ;;
-       ubnt,acb-isp)
+       ubnt,aircube-ac)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:1" "3:lan:2" "5:lan:3" "4:wan"
+               ;;
+       ubnt,aircube-isp)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
@@ -327,8 +474,12 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:1" "3:lan:2"
                ;;
-       zbtlink,zbt-wd323|\
-       xiaomi,mi-router-4q)
+       ubnt,unifi-ap-pro)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan"
+               ;;
+       xiaomi,mi-router-4q|\
+       zbtlink,zbt-wd323)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan:1" "4:lan:2"
@@ -349,9 +500,21 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_binary "Board data" 2)
                label_mac=$lan_mac
                ;;
-       alfa-network,ap121f)
+       alfa-network,ap121f|\
+       alfa-network,ap121fe|\
+       alfa-network,n2q|\
+       alfa-network,n5q|\
+       alfa-network,pi-wifi4|\
+       alfa-network,r36a|\
+       engenius,eap300-v2|\
+       engenius,ens202ext-v1)
                label_mac=$(mtd_get_mac_binary art 0x1002)
                ;;
+       arduino,yun)
+               base_mac=$(mtd_get_mac_binary art 0x1002)
+               lan_mac=$(macaddr_setbit $base_mac 29)
+               [ $lan_mac = $base_mac ] && lan_mac=$(macaddr_unsetbit $base_mac 29)
+               ;;
        avm,fritz1750e|\
        avm,fritz450e|\
        avm,fritzdvbc)
@@ -365,10 +528,33 @@ ath79_setup_macs()
                lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
                wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
                ;;
+       comfast,cf-e375ac)
+               wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
+               ;;
+       compex,wpj344-16m|\
+       compex,wpj558-16m|\
+       compex,wpj563)
+               wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
+               ;;
+       devolo,dlan-pro-1200plus-ac|\
        devolo,magic-2-wifi)
                label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
                ;;
-       dlink,dap-2695-a1)
+       dlink,dap-1330-a1|\
+       dlink,dap-1365-a1|\
+       dlink,dch-g020-a1)
+               lan_mac=$(mtd_get_mac_text "mp" 0x1)
+               label_mac=$lan_mac
+               ;;
+       dlink,dap-2230-a1|\
+       dlink,dap-2660-a1|\
+       dlink,dap-2680-a1|\
+       dlink,dap-3320-a1)
+               lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
+               label_mac=$lan_mac
+               ;;
+       dlink,dap-2695-a1|\
+       dlink,dap-3662-a1)
                label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
                ;;
        dlink,dir-825-b1)
@@ -385,8 +571,7 @@ ath79_setup_macs()
                ;;
        dlink,dir-842-c1|\
        dlink,dir-842-c2|\
-       dlink,dir-842-c3|\
-       nec,wg1200cr)
+       dlink,dir-842-c3)
                lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
                wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
                label_mac=$lan_mac
@@ -401,9 +586,10 @@ ath79_setup_macs()
        elecom,wrc-300ghbk2-i)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
                ;;
+       engenius,ecb1200|\
        engenius,ecb1750)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-               label_mac=$(mtd_get_mac_ascii u-boot-env athaddr)
+               label_mac=$lan_mac
                ;;
        engenius,epg5000)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
@@ -418,6 +604,10 @@ ath79_setup_macs()
        enterasys,ws-ap3705i)
                label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
                ;;
+       hak5,lan-turtle|\
+       hak5,packet-squirrel)
+               label_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
+               ;;
        iodata,etg3-r)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(macaddr_add "$lan_mac" -1)
@@ -435,6 +625,19 @@ ath79_setup_macs()
                wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;
+       mercury,mw4530r-v1|\
+       tplink,tl-wdr3600-v1|\
+       tplink,tl-wdr4300-v1|\
+       tplink,tl-wdr4300-v1-il)
+               base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
+               wan_mac=$(macaddr_add "$base_mac" 1)
+               ;;
+       nec,wf1200cr|\
+       nec,wg1200cr)
+               lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+               wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+               label_mac=$wan_mac
+               ;;
        nec,wg800hp)
                lan_mac=$(mtd_get_mac_text board_data 0x280)
                wan_mac=$(mtd_get_mac_text board_data 0x480)
@@ -469,12 +672,6 @@ ath79_setup_macs()
                base_mac=$(mtd_get_mac_binary info 0x8)
                wan_mac=$(macaddr_add "$base_mac" 1)
                ;;
-       tplink,tl-wdr3600-v1|\
-       tplink,tl-wdr4300-v1|\
-       tplink,tl-wdr4300-v1-il)
-               base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
-               wan_mac=$(macaddr_add "$base_mac" 1)
-               ;;
        trendnet,tew-823dru)
                lan_mac=$(mtd_get_mac_text mac 0x4)
                wan_mac=$(mtd_get_mac_text mac 0x18)
@@ -487,11 +684,13 @@ ath79_setup_macs()
        ubnt,nanostation-loco-m|\
        ubnt,nanostation-m|\
        ubnt,picostation-m|\
+       ubnt,powerbridge-m|\
        ubnt,rocket-m|\
        ubnt,unifi)
                label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
                ;;
        ubnt,litebeam-ac-gen2|\
+       ubnt,nanobeam-ac-gen2|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2)
                label_mac=$(mtd_get_mac_binary art 0x5006)
@@ -504,6 +703,12 @@ ath79_setup_macs()
        wd,mynet-wifi-rangeextender)
                lan_mac=$(nvram get et0macaddr)
                ;;
+       xiaomi,aiot-ac2350)
+               lan_mac=$(mtd_get_mac_binary art 0x1002)
+               ;;
+       zyxel,nbg6616)
+               label_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac