bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM

[openwrt/openwrt.git] / target / linux / bcm53xx / config-3.18

diff --git a/target/linux/bcm53xx/config-3.18 b/target/linux/bcm53xx/config-3.18
index f42639a9f20a4a84addb8a90b3573d5a93c02b7e..d08e66779439acbcb7fa3559b4c47f66166c4548 100644 (file)
--- a/target/linux/bcm53xx/config-3.18
+++ b/target/linux/bcm53xx/config-3.18
@@ -45,7 +45,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_ATAGS=y
 # CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_ATAGS=y

-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set

 CONFIG_AUTO_ZRELADDR=y
 CONFIG_B53=y
 # CONFIG_B53_MMAP_DRIVER is not set
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_B53=y
 # CONFIG_B53_MMAP_DRIVER is not set


@@ -62,6 +61,7 @@ CONFIG_BCMA_HOST_PCI=y
 CONFIG_BCMA_HOST_PCI_POSSIBLE=y
 CONFIG_BCMA_HOST_SOC=y
 CONFIG_BGMAC=y
 CONFIG_BCMA_HOST_PCI_POSSIBLE=y
 CONFIG_BCMA_HOST_SOC=y
 CONFIG_BGMAC=y

+CONFIG_BOUNCE=y

 CONFIG_CACHE_L2X0=y
 CONFIG_CACHE_PL310=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_CACHE_L2X0=y
 CONFIG_CACHE_PL310=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y


@@ -70,7 +70,6 @@ CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
 CONFIG_CLKSRC_OF=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_COMMON_CLK=y
 CONFIG_CLKSRC_OF=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_COMMON_CLK=y

-# CONFIG_COMMON_CLK_PXA is not set

 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y


@@ -95,12 +94,9 @@ CONFIG_DEBUG_BCM_5301X=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"

-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set

 CONFIG_DEBUG_UART_8250=y
 # CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
 CONFIG_DEBUG_UART_8250_SHIFT=0
 CONFIG_DEBUG_UART_8250=y
 # CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
 CONFIG_DEBUG_UART_8250_SHIFT=0

-# CONFIG_DEBUG_UART_BCM63XX is not set

 CONFIG_DEBUG_UART_PHYS=0x18000300
 # CONFIG_DEBUG_UART_PL01X is not set
 CONFIG_DEBUG_UART_VIRT=0xf1000300
 CONFIG_DEBUG_UART_PHYS=0x18000300
 # CONFIG_DEBUG_UART_PL01X is not set
 CONFIG_DEBUG_UART_VIRT=0xf1000300


@@ -123,6 +119,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GPIOLIB=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GPIOLIB=y

+CONFIG_GPIO_74X164=y

 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y


@@ -175,6 +172,8 @@ CONFIG_HAVE_SMP=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y

+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set

 CONFIG_HZ_FIXED=0
 CONFIG_HZ_PERIODIC=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_HZ_FIXED=0
 CONFIG_HZ_PERIODIC=y
 CONFIG_INITRAMFS_SOURCE=""


@@ -198,6 +197,7 @@ CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
 CONFIG_MTD_SPI_NOR=y

+CONFIG_MTD_SPLIT_SUPPORT=y

 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y


@@ -246,13 +246,15 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SCHED_HRTICK=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SCHED_HRTICK=y
 # CONFIG_SCSI_DMA is not set

-CONFIG_SERIAL_EARLYCON=y
+# CONFIG_SECCOMP is not set

 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SMP=y
 CONFIG_SMP_ON_UP=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM53XX=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SMP=y
 CONFIG_SMP_ON_UP=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM53XX=y

+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y

 CONFIG_SPI_MASTER=y
 CONFIG_STOP_MACHINE=y
 CONFIG_SWCONFIG=y
 CONFIG_SPI_MASTER=y
 CONFIG_STOP_MACHINE=y
 CONFIG_SWCONFIG=y