+# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Image/Prepare
- $(CP) $(DTS_DIR)/*.dtb $(KDIR)/
-
rm -f $(KDIR)/fs_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
- $(CP) ./ubinize.cfg $(KDIR)
-endef
-
-define Build/append-dtb
- cat $(KDIR)/$(DT).dtb >> $@
+ # For UBI we want only one extra block
+ rm -f $(KDIR)/ubi_mark
+ echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
define Build/lzma-d16
$(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new
- @mv $@.new $@
+ mv $@.new $@
endef
-define Build/mkfs/squashfs
- ( cd $(KDIR); $(STAGING_DIR_HOST)/bin/ubinize -p 128KiB -m 2048 -o $(KDIR)/root-block-0x20000-min-0x800.ubi ubinize.cfg )
+# Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
+define Build/bcm53xx-tplink-safeloader
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@.trx \
+ -m 33554432 \
+ -f $(IMAGE_KERNEL) -a 1024
+ $(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(TPLINK_BOARD) \
+ -k $@.trx \
+ -r $@ \
+ -j \
+ -o $@.new
+ mv $@.new $@
+ rm $@.trx
endef
-define Build/trx-nand
+define Build/buffalo-wzr-header
+ $(eval product=$(word 1,$(1)))
+ $(eval region=$(word 2,$(1)))
+ ( \
+ echo $(product)_$(BUFFALO_TAG_VERSION)_$(BUFFALO_TAG_MINOR)_$(region)_$(BUFFALO_TAG_PLATFORM); \
+ echo filelen=$$(stat -c%s $@); \
+ cat $@ \
+ ) > $@.new
+ mv $@.new $@
+endef
+
+# TRX with only one (kernel) partition
+define Build/trx
$(STAGING_DIR_HOST)/bin/trx \
- -o $@ \
- -f $(word 1,$^) \
- -a 0x20000 -f $(KDIR)/root-block-0x20000-min-0x800.ubi \
- -a 0x20000 -A $(KDIR)/fs_mark
+ -o $@.new \
+ -m 33554432 \
+ -f $@
+ mv $@.new $@
endef
-define Build/netgear-chk
- $(STAGING_DIR_HOST)/bin/mkchkimg \
- -o $@.new -k $@ -b $(BOARD_ID) -r $(REGION)
+define Build/trx-serial
+ $(STAGING_DIR_HOST)/bin/otrx create $@.new \
+ -f $(IMAGE_KERNEL) -a 1024 \
+ -f $@ -a 0x10000 -A $(KDIR)/fs_mark
mv $@.new $@
endef
-DEVICE_VARS += DT BOARD_ID REGION
+define Build/trx-nand
+ # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
+ # if it grows up between releases
+ # root: UBI with one extra block containing UBI mark to trigger erasing
+ # rest of partition
+ $(STAGING_DIR_HOST)/bin/otrx create $@.new \
+ -f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
+ -f $@ \
+ -A $(KDIR)/ubi_mark -a 0x20000
+ mv $@.new $@
+endef
+
+define Build/asus-trx
+ $(STAGING_DIR_HOST)/bin/asustrx \
+ -p $(ASUS_PRODUCTID) -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Build/luxul-lxl
+ $(STAGING_DIR_HOST)/bin/lxlfw create $@.new \
+ -i $@ \
+ -b $(LUXUL_BOARD)
+ mv $@.new $@
+endef
+
+# Outputs a lzma compressed U-Boot that start at 0x00008000
+# just like the D-Link boot loaders expect
+define Build/dlink-uboot-bin
+ $(STAGING_DIR_HOST)/bin/lzma e $(STAGING_DIR_IMAGE)/$(DEVICE_NAME)-u-boot.bin -d16 $@
+endef
+
+define Build/seama-nand
+ # Seama entity
+ $(STAGING_DIR_HOST)/bin/oseama \
+ entity $@.entity \
+ -m "dev=/dev/mtdblock/7" \
+ -m "type=firmware" \
+ -f $(IMAGE_KERNEL) \
+ -b 0x400000 \
+ -f $@ \
+ -f $(KDIR)/ubi_mark
+ # Seama container
+ $(STAGING_DIR_HOST)/bin/seama \
+ -s $@ \
+ -m "signature=$(SIGNATURE)" \
+ -i $@.entity
+endef
+
+define Build/dwl8610ap-image
+ mkdir -p $@.tmptar
+ # The DWL8610AP pretends to be a Broadcom reference design
+ echo "bcm953012er" > $@.tmptar/board
+ echo "LVL7" > $@.tmptar/model
+ # Something high beyond what D-Link has put out
+ echo "5.0.0.0" > $@.tmptar/version
+ # Create rootfs.bin, this is just a NAND image including everything
+ cp $@ $@.tmptar/rootfs.bin
+ # Hash the rootfs.bin
+ cat $@.tmptar/rootfs.bin | md5sum > $@.tmptar/rootfs.md5
+ cd $@.tmptar && tar -c -f $@.new *
+ rm -rf $@.tmptar
+ mv $@.new $@
+endef
+
+ifneq ($(KERNEL),5.15)
+ifneq ($(KERNEL),6.1)
+DTS_DIR := $(DTS_DIR)/broadcom
+endif
+endif
+
+DEVICE_VARS += ASUS_PRODUCTID
+DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
+DEVICE_VARS += SIGNATURE
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
+DEVICE_VARS += LUXUL_BOARD
+
+IEEE8021X := wpad-basic-mbedtls
+B43 := $(IEEE8021X) kmod-b43
+BRCMFMAC_43602A1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
+BRCMFMAC_4366B1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
+BRCMFMAC_4366C0 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366c0-pcie
+USB2_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
+USB2_PACKAGES += kmod-usb-ledtrig-usbport
+USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3
define Device/Default
+ PROFILES = Generic $$(DEVICE_NAME)
# .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
# extract the full dtb name based on the device info
- DT := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
+ DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(subst _,-,$(1)).dtb)))
KERNEL := kernel-bin | append-dtb | lzma-d16
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL_INITRAMFS_SUFFIX := .trx
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16 | trx
FILESYSTEMS := squashfs
KERNEL_NAME := zImage
- IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
+ DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(1).$$(2)
+ IMAGES := trx
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE/trx := append-ubi | trx-nand
+endef
+
+define Device/asus
+ DEVICE_VENDOR := ASUS
IMAGES := trx
- IMAGE/trx := trx-nand
+ IMAGE/trx := append-ubi | trx-nand | asus-trx
+endef
+
+define Device/asus_rt-ac3100
+ $(call Device/asus)
+ DEVICE_MODEL := RT-AC3100
+ DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ ASUS_PRODUCTID := RT-AC3100
+endef
+TARGET_DEVICES += asus_rt-ac3100
+
+define Device/asus_rt-ac56u
+ $(call Device/asus)
+ DEVICE_MODEL := RT-AC56U
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+ ASUS_PRODUCTID := RT-AC56U
+endef
+TARGET_DEVICES += asus_rt-ac56u
+
+define Device/asus_rt-ac68u
+ $(call Device/asus)
+ DEVICE_MODEL := RT-AC68U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ ASUS_PRODUCTID := RT-AC68U
+endef
+TARGET_DEVICES += asus_rt-ac68u
+
+define Device/asus_rt-ac87u
+ $(call Device/asus)
+ DEVICE_MODEL := RT-AC87U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ ASUS_PRODUCTID := RT-AC87U
+endef
+TARGET_DEVICES += asus_rt-ac87u
+
+define Device/asus_rt-ac88u
+ $(call Device/asus)
+ DEVICE_MODEL := RT-AC88U
+ DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ ASUS_PRODUCTID := RT-AC88U
+endef
+TARGET_DEVICES += asus_rt-ac88u
+
+define Device/asus_rt-n18u
+ $(call Device/asus)
+ DEVICE_MODEL := RT-N18U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ ASUS_PRODUCTID := RT-N18U
+endef
+TARGET_DEVICES += asus_rt-n18u
+
+# Buffalo devices have TFTP recovery mode which can work nicely with initramfs
+# kernels.
+# We should have two initramfs images for Buffalo: plain initramfs kernel and
+# TRX with initramfs kernel. It's not possible right now so let's just build
+# plain initramfs kernel as it may be more useful.
+define Device/buffalo/Default
+ DEVICE_VENDOR := Buffalo
+ KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX)
+ KERNEL_INITRAMFS = $$(KERNEL)
+endef
+
+define Device/buffalo_wxr-1900dhp
+ $(call Device/buffalo/Default)
+ DEVICE_MODEL := WXR-1900DHP
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += buffalo_wxr-1900dhp
+
+define Device/buffalo_wzr-600dhp2
+ $(call Device/buffalo/Default)
+ DEVICE_MODEL := WZR-600DHP2
+ DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += buffalo_wzr-600dhp2
+
+define Device/buffalo_wzr-900dhp
+ $(call Device/buffalo/Default)
+ DEVICE_MODEL := WZR-900DHP
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+ BUFFALO_TAG_PLATFORM := bcm
+ BUFFALO_TAG_VERSION := 9.99
+ BUFFALO_TAG_MINOR := 9.99
+ IMAGES += factory-DHP-EU.bin factory-DHP2-JP.bin
+ IMAGE/factory-DHP-EU.bin := \
+ append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \
+ buffalo-enc WZR-900DHP $$(BUFFALO_TAG_VERSION) | \
+ buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \
+ buffalo-dhp-image
+ IMAGE/factory-DHP2-JP.bin := \
+ append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \
+ buffalo-enc WZR-900DHP2 $$(BUFFALO_TAG_VERSION) | \
+ buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
+ buffalo-dhp-image
+endef
+TARGET_DEVICES += buffalo_wzr-900dhp
+
+define Device/buffalo_wzr-1750dhp
+ $(call Device/buffalo/Default)
+ DEVICE_MODEL := WZR-1750DHP
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += buffalo_wzr-1750dhp
+
+define Device/dlink
+ DEVICE_VENDOR := D-Link
+ IMAGES := bin
+ IMAGE/bin := append-ubi | seama-nand
+endef
+
+define Device/dlink_dir-885l
+ DEVICE_MODEL := DIR-885L
+ DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
+ $(Device/dlink)
+ SIGNATURE := wrgac42_dlink.2015_dir885l
+endef
+TARGET_DEVICES += dlink_dir-885l
+
+define Device/dlink_dir-890l
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DIR-890L
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB2_PACKAGES) $(USB3_PACKAGES)
+ # Layout: U-boot (128kb max) followed by kernel and appended DTB.
+ # This is done because the boot loader will only read the first 2 MB
+ # from the flash and decompress the LZMA it finds there after the
+ # SEAMA header. Since the compressed kernel will not fit in 2 MB,
+ # we put U-Boot there and let U-Boot read and execute the kernel.
+ KERNEL := dlink-uboot-bin | pad-to 128k | append-kernel | append-dtb
+ $(Device/dlink)
+ SIGNATURE := wrgac36_dlink.2013gui_dir890
+endef
+TARGET_DEVICES += dlink_dir-890l
+
+define Device/dlink_dwl-8610ap
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DWL-8610AP
+ DEVICE_PACKAGES := $(B43)
+ IMAGES := factory.tar
+ IMAGE/factory.tar := append-ubi | trx-nand | dwl8610ap-image
+endef
+TARGET_DEVICES += dlink_dwl-8610ap
+
+define Device/linksys_ea6300-v1
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA6300
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += linksys_ea6300-v1
+
+define Device/linksys_ea6500-v2
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA6500
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += linksys_ea6500-v2
+
+define Device/linksys_ea9200
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA9200
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += linksys_ea9200
+
+define Device/linksys_ea9500
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA9500
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ DEVICE_DTS := bcm47094-linksys-panamera
+endef
+TARGET_DEVICES += linksys_ea9500
+
+define Device/luxul
+ DEVICE_VENDOR := Luxul
+ IMAGES := lxl
+ IMAGE/lxl := append-ubi | trx-nand | luxul-lxl
endef
+define Device/luxul_abr-4500
+ $(Device/luxul)
+ DEVICE_MODEL := ABR-4500
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ LUXUL_BOARD := ABR-4500
+endef
+TARGET_DEVICES += luxul_abr-4500
+
+define Device/luxul_xap-1610
+ $(Device/luxul)
+ DEVICE_MODEL := XAP-1610
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0)
+ IMAGE/lxl := append-rootfs | trx-serial | luxul-lxl
+ LUXUL_BOARD := XAP-1610
+endef
+TARGET_DEVICES += luxul_xap-1610
+
+define Device/luxul_xbr-4500
+ $(Device/luxul)
+ DEVICE_MODEL := XBR-4500
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ LUXUL_BOARD := XBR-4500
+endef
+TARGET_DEVICES += luxul_xbr-4500
+
+define Device/luxul_xwr-3150
+ $(Device/luxul)
+ DEVICE_MODEL := XWR-3150
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ DEVICE_DTS := bcm47094-luxul-xwr-3150-v1
+ LUXUL_BOARD := XWR-3150
+endef
+TARGET_DEVICES += luxul_xwr-3150
+
+define Device/meraki_mr26
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR26
+ DEVICE_PACKAGES := $(B43) kmod-i2c-bcm-iproc kmod-eeprom-at24 \
+ kmod-hwmon-ina2xx kmod-leds-uleds nu801
+ DEVICE_DTS := bcm53015-meraki-mr26
+# resize the initramfs to fit the size of the existing part.safe.
+ KERNEL_LOADADDR := 0x00008000
+ KERNEL_INITRAMFS_SUFFIX := .bin
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | uImage gzip | pad-to 9310208
+# LZMA is not supported by the uboot
+ KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
+ IMAGES += sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += meraki_mr26
+
+define Device/meraki_mr32
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR32
+ DEVICE_PACKAGES := $(B43) kmod-i2c-bcm-iproc kmod-eeprom-at24 \
+ kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
+ DEVICE_DTS := bcm53016-meraki-mr32
+# Meraki FW r23 tries to resize the part.safe partition before it will
+# flash the image. This is a bit of a problem, since resizing will fail
+# if the partition is smaller than the old one.
+ KERNEL_LOADADDR := 0x00008000
+ KERNEL_INITRAMFS_SUFFIX := .bin
+ DEVICE_DTS_DELIMITER := @
+ DEVICE_DTS_CONFIG := config@1
+ KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | \
+ pad-to 10362880
+ KERNEL := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ IMAGES += sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+
+# The loader is specifically looking for fdt@2:
+# [ 3.190000] find_itb_subimage: error finding fdt@2: FDT_ERR_NOTFOUND
+# The image won't boot, if it isn't found. :(
+ DEVICE_FDT_NUM := 2
+endef
+TARGET_DEVICES += meraki_mr32
+
define Device/netgear
+ DEVICE_VENDOR := NETGEAR
IMAGES := chk
- IMAGE/chk := trx-nand | netgear-chk
- REGION := 1
+ IMAGE/chk := append-ubi | trx-nand | netgear-chk
+ NETGEAR_REGION := 1
+endef
+
+define Device/netgear_r6250
+ DEVICE_MODEL := R6250
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H245T00_NETGEAR
endef
+TARGET_DEVICES += netgear_r6250
-define Device/netgear-r6250
+define Device/netgear_r6300-v2
+ DEVICE_MODEL := R6300
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
$(Device/netgear)
- BOARD_ID := U12H245T00_NETGEAR
+ NETGEAR_BOARD_ID := U12H240T00_NETGEAR
endef
+TARGET_DEVICES += netgear_r6300-v2
-define Device/netgear-r6300-v2
+define Device/netgear_r7000
+ DEVICE_MODEL := R7000
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
$(Device/netgear)
- BOARD_ID := U12H240T00_NETGEAR
+ NETGEAR_BOARD_ID := U12H270T00_NETGEAR
endef
+TARGET_DEVICES += netgear_r7000
-define Device/netgear-r8000
+define Device/netgear_r7900
+ DEVICE_MODEL := R7900
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
$(Device/netgear)
- BOARD_ID := U12H315T00_NETGEAR
+ NETGEAR_BOARD_ID := U12H315T30_NETGEAR
endef
+TARGET_DEVICES += netgear_r7900
-TARGET_DEVICES += \
- asus-rt-ac56u asus-rt-ac68u asus-rt-ac87u asus-rt-n18u \
- netgear-r6250 netgear-r6300-v2 netgear-r8000 \
- buffalo-wzr-1750dhp buffalo-wzr-600dhp2 buffalo-wzr-900dhp \
- buffalo-wxr-1900dhp
+define Device/netgear_r8000
+ DEVICE_MODEL := R8000
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H315T00_NETGEAR
+endef
+TARGET_DEVICES += netgear_r8000
+
+define Device/netgear_r8500
+ DEVICE_MODEL := R8500
+ DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H334T00_NETGEAR
+ DEFAULT := n
+endef
+TARGET_DEVICES += netgear_r8500
+
+define Device/smartrg_sr400ac
+ DEVICE_VENDOR := SmartRG
+ DEVICE_MODEL := SR400ac
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
+ IMAGES := trx
+ IMAGE/trx := append-rootfs | trx-serial
+ KERNEL_INITRAMFS_SUFFIX := .bin
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16
+endef
+TARGET_DEVICES += smartrg_sr400ac
+
+define Device/phicomm_k3
+ DEVICE_VENDOR := PHICOMM
+ DEVICE_MODEL := K3
+ DEVICE_ALT0_VENDOR := Wavlink
+ DEVICE_ALT0_MODEL := QUANTUM DAX
+ DEVICE_ALT1_VENDOR := Wavlink
+ DEVICE_ALT1_MODEL := WL-WN538A8
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ IMAGES := trx
+endef
+TARGET_DEVICES += phicomm_k3
+
+define Device/tenda_ac9
+ DEVICE_VENDOR := Tenda
+ DEVICE_MODEL := AC9
+ DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
+ IMAGES := trx
+ IMAGE/trx := append-rootfs | trx-serial
+endef
+TARGET_DEVICES += tenda_ac9
+
+define Device/tplink_archer-c5-v2
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := Archer C5
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
+ IMAGES := bin
+ IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
+ TPLINK_BOARD := ARCHER-C5-V2
+ BROKEN := y
+endef
+#TARGET_DEVICES += tplink_archer-c5-v2
+
+define Device/tplink_archer-c9-v1
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := Archer C9
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ IMAGES := bin
+ IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
+ TPLINK_BOARD := ARCHERC9
+ BROKEN := y
+endef
+#TARGET_DEVICES += tplink_archer-c9-v1
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff