mv $@.new $@
endef
-define Build/trx-serial
+# Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
+define Build/bcm53xx-tplink-safeloader
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@.trx \
+ -m 33554432 \
+ -f $(IMAGE_KERNEL) -a 1024
+ $(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(TPLINK_BOARD) \
+ -k $@.trx \
+ -r $@ \
+ -j \
+ -o $@.new
+ mv $@.new $@
+ rm $@.trx
+endef
+
+define Build/buffalo-wzr-header
+ $(eval product=$(word 1,$(1)))
+ $(eval region=$(word 2,$(1)))
+ ( \
+ echo $(product)_$(BUFFALO_TAG_VERSION)_$(BUFFALO_TAG_MINOR)_$(region)_$(BUFFALO_TAG_PLATFORM); \
+ echo filelen=$$(stat -c%s $@); \
+ cat $@ \
+ ) > $@.new
+ mv $@.new $@
+endef
+
+# TRX with only one (kernel) partition
+define Build/trx
$(STAGING_DIR_HOST)/bin/trx \
-o $@.new \
-m 33554432 \
+ -f $@
+ mv $@.new $@
+endef
+
+define Build/trx-serial
+ $(STAGING_DIR_HOST)/bin/otrx create $@.new \
-f $(IMAGE_KERNEL) -a 1024 \
-f $@ -a 0x10000 -A $(KDIR)/fs_mark
mv $@.new $@
# if it grows up between releases
# root: UBI with one extra block containing UBI mark to trigger erasing
# rest of partition
- $(STAGING_DIR_HOST)/bin/trx \
- -o $@.new \
- -m 33554432 \
+ $(STAGING_DIR_HOST)/bin/otrx create $@.new \
-f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
-f $@ \
-A $(KDIR)/ubi_mark -a 0x20000
-i $@.entity
endef
-DEVICE_VARS += PRODUCTID SIGNATURE NETGEAR_BOARD_ID NETGEAR_REGION
+DEVICE_VARS += PRODUCTID SIGNATURE NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
+DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
+
+IEEE8021X := wpad-mini
+B43 := $(IEEE8021X) kmod-b43
+BRCMFMAC_43602A1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
+BRCMFMAC_4366B1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
+BRCMFMAC_4366C0 := $(IEEE8021X) kmod-brcmfmac
+USB2_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
+USB2_PACKAGES += kmod-usb-ledtrig-usbport
+USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3
define Device/Default
# .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
KERNEL := kernel-bin | append-dtb | lzma-d16
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL_INITRAMFS_SUFFIX := .trx
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16 | trx
FILESYSTEMS := squashfs
KERNEL_NAME := zImage
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
IMAGES := trx
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 2048
- UBINIZE_OPTS :=
IMAGE/trx := append-ubi | trx-nand
endef
define Device/asus-rt-ac56u
DEVICE_TITLE := Asus RT-AC56U
- DEVICE_PACKAGES := kmod-b43
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-ac56u
define Device/asus-rt-ac68u
DEVICE_TITLE := Asus RT-AC68U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-ac68u
define Device/asus-rt-ac87u
DEVICE_TITLE := Asus RT-AC87U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-ac87u
define Device/asus-rt-n18u
DEVICE_TITLE := Asus RT-N18U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-n18u
+# Buffalo devices have TFTP recovery mode which can work nicely with initramfs
+# kernels.
+# We should have two initramfs images for Buffalo: plain initramfs kernel and
+# TRX with initramfs kernel. It's not possible right now so let's just build
+# plain initramfs kernel as it may be more useful.
+define Device/buffalo/Default
+ KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX)
+ KERNEL_INITRAMFS = $$(KERNEL)
+endef
+
+define Device/buffalo-wxr-1900dhp
+ $(call Device/buffalo/Default)
+ DEVICE_TITLE := Buffalo WXR-1900DHP
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += buffalo-wxr-1900dhp
+
+define Device/buffalo-wzr-600dhp2
+ $(call Device/buffalo/Default)
+ DEVICE_TITLE := Buffalo WZR-600DHP2
+ DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += buffalo-wzr-600dhp2
+
+define Device/buffalo-wzr-900dhp
+ $(call Device/buffalo/Default)
+ DEVICE_TITLE := Buffalo WZR-900DHP
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+ BUFFALO_TAG_PLATFORM := bcm
+ BUFFALO_TAG_VERSION := 9.99
+ BUFFALO_TAG_MINOR := 9.99
+ IMAGES += factory-DHP-EU.bin factory-DHP2-JP.bin
+ IMAGE/factory-DHP-EU.bin := \
+ append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \
+ buffalo-enc WZR-900DHP $$(BUFFALO_TAG_VERSION) | \
+ buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \
+ buffalo-dhp-image
+ IMAGE/factory-DHP2-JP.bin := \
+ append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \
+ buffalo-enc WZR-900DHP2 $$(BUFFALO_TAG_VERSION) | \
+ buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
+ buffalo-dhp-image
+endef
+TARGET_DEVICES += buffalo-wzr-900dhp
+
+define Device/buffalo-wzr-1750dhp
+ $(call Device/buffalo/Default)
+ DEVICE_TITLE := Buffalo WZR-1750DHP
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += buffalo-wzr-1750dhp
+
define Device/dlink
IMAGES := bin
IMAGE/bin := append-ubi | seama-nand
define Device/dlink-dir-885l
DEVICE_TITLE := D-Link DIR-885L
- DEVICE_PACKAGES := kmod-brcmfmac
+ DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
$(Device/dlink)
SIGNATURE := wrgac42_dlink.2015_dir885l
endef
TARGET_DEVICES += dlink-dir-885l
+# Linksys devices are disabled due to problem with 2 TRX partitions
+
define Device/linksys-ea6300-v1
DEVICE_TITLE := Linksys EA6300 V1
- DEVICE_PACKAGES := kmod-b43
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
+endef
+# TARGET_DEVICES += linksys-ea6300-v1
+
+define Device/linksys-ea9200
+ DEVICE_TITLE := Linksys EA9200 V1
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
+endef
+# TARGET_DEVICES += linksys-ea9200
+
+define Device/linksys-ea9500
+ DEVICE_TITLE := Linksys EA9500
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ DEVICE_DTS := bcm47094-linksys-panamera
endef
-TARGET_DEVICES += linksys-ea6300-v1
+# TARGET_DEVICES += linksys-ea9500
define Device/netgear
IMAGES := chk
define Device/netgear-r6250
DEVICE_TITLE := Netgear R6250
- DEVICE_PACKAGES := kmod-b43
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H245T00_NETGEAR
endef
+TARGET_DEVICES += netgear-r6250
define Device/netgear-r6300-v2
DEVICE_TITLE := Netgear R6300 V2
- DEVICE_PACKAGES := kmod-b43
+ DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H240T00_NETGEAR
endef
+TARGET_DEVICES += netgear-r6300-v2
define Device/netgear-r7000
DEVICE_TITLE := Netgear R7000
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H270T00_NETGEAR
endef
define Device/netgear-r7900
DEVICE_TITLE := Netgear R7900
- DEVICE_PACKAGES := kmod-brcmfmac
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H315T30_NETGEAR
endef
define Device/netgear-r8000
DEVICE_TITLE := Netgear R8000
- DEVICE_PACKAGES := kmod-brcmfmac
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H315T00_NETGEAR
endef
+TARGET_DEVICES += netgear-r8000
define Device/netgear-r8500
DEVICE_TITLE := Netgear R8500
- DEVICE_PACKAGES := kmod-brcmfmac
+ DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H334T00_NETGEAR
endef
define Device/smartrg-sr400ac
DEVICE_TITLE := SmartRG SR400ac
- DEVICE_PACKAGES := kmod-brcmfmac
+ DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
+ IMAGES := trx
+ IMAGE/trx := append-rootfs | trx-serial
+ KERNEL_INITRAMFS_SUFFIX := .bin
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16
+endef
+TARGET_DEVICES += smartrg-sr400ac
+
+define Device/tenda-ac9
+ DEVICE_TITLE := Tenda AC9
+ DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
IMAGES := trx
IMAGE/trx := append-rootfs | trx-serial
endef
+TARGET_DEVICES += tenda-ac9
-TARGET_DEVICES += \
- buffalo-wzr-1750dhp buffalo-wzr-600dhp2 buffalo-wzr-900dhp \
- buffalo-wxr-1900dhp \
- netgear-r6250 netgear-r6300-v2 netgear-r8000 \
- smartrg-sr400ac
+define Device/tplink-archer-c5-v2
+ DEVICE_TITLE := TP-LINK Archer C5 V2
+ DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
+ IMAGES := bin
+ IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
+ TPLINK_BOARD := ARCHER-C5-V2
+endef
+TARGET_DEVICES += tplink-archer-c5-v2
+
+define Device/tplink-archer-c9-v1
+ DEVICE_TITLE := TP-LINK Archer C9 V1
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ IMAGES := bin
+ IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
+ TPLINK_BOARD := ARCHERC9
+endef
+TARGET_DEVICES += tplink-archer-c9-v1
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff