brcm2708-gpu-fw: add fw required for camera module

[openwrt/openwrt.git] / target / linux / brcm2708 / image / Makefile

diff --git a/target/linux/brcm2708/image/Makefile b/target/linux/brcm2708/image/Makefile
index 9ea9a07a9dd27415a046a0cb2ca814aabf5ff343..b9dfa8f21fad82293e3686cbc10fe986858447c8 100644 (file)
--- a/target/linux/brcm2708/image/Makefile
+++ b/target/linux/brcm2708/image/Makefile
@@ -29,8 +29,10 @@ define Build/boot-img
        mcopy -i $@.boot $(KDIR)/LICENCE.broadcom ::
        mcopy -i $@.boot $(KDIR)/start.elf ::
        mcopy -i $@.boot $(KDIR)/start_cd.elf ::
+       mcopy -i $@.boot $(KDIR)/start_x.elf ::
        mcopy -i $@.boot $(KDIR)/fixup.dat ::
        mcopy -i $@.boot $(KDIR)/fixup_cd.dat ::
+       mcopy -i $@.boot $(KDIR)/fixup_x.dat ::
        mcopy -i $@.boot cmdline.txt ::
        mcopy -i $@.boot config.txt ::
        mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_IMG)
@@ -47,26 +49,28 @@ endef
 
 ### Devices ###
 define Device/Default
-  FILESYSTEMS := ext4
   KERNEL := kernel-bin | kernel-img
   KERNEL_IMG := kernel.img
-  IMAGES := sdcard.img.gz
-  IMAGE/sdcard.img.gz := boot-img | sdcard-img | gzip | append-metadata
+  IMAGES := factory.img.gz sysupgrade.img.gz
+  IMAGE/sysupgrade.img.gz := boot-img | sdcard-img | gzip | append-metadata
+  IMAGE/factory.img.gz := boot-img | sdcard-img | gzip
 endef
 
 define Device/rpi
   DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero/ZeroW
   DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm bcm2708-rpi-0-w
   SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,compute-module-1 raspberrypi,model-b-rev2 raspberrypi,model-zero raspberrypi,model-zero-w
+  DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-board-rpi2 kmod-brcmfmac wpad-basic
 endef
 ifeq ($(SUBTARGET),bcm2708)
   TARGET_DEVICES += rpi
 endif
 
 define Device/rpi-2
-  DEVICE_TITLE := Raspberry Pi 2B/3B/3CM
-  DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-cm3
-  SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,compute-module-3
+  DEVICE_TITLE := Raspberry Pi 2B/3B/3B+/3CM
+  DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3
+  SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,3-model-b-plus raspberrypi,compute-module-3
+  DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-firmware-43455-sdio brcmfmac-board-rpi2 brcmfmac-board-rpi3 kmod-brcmfmac wpad-basic
 endef
 ifeq ($(SUBTARGET),bcm2709)
   TARGET_DEVICES += rpi-2
@@ -74,9 +78,10 @@ endif
 
 define Device/rpi-3
   KERNEL_IMG := kernel8.img
-  DEVICE_TITLE := Raspberry Pi 3B (64 bit)
-  DEVICE_DTS := broadcom/bcm2710-rpi-3-b
-  SUPPORTED_DEVICES := rpi-3-b raspberrypi,3-model-b
+  DEVICE_TITLE := Raspberry Pi 3B/3B+
+  DEVICE_DTS := broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus
+  SUPPORTED_DEVICES := rpi-3-b rpi-3-b-plus raspberrypi,3-model-b raspberrypi,3-model-b-plus
+  DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-board-rpi2 brcmfmac-firmware-43455-sdio brcmfmac-board-rpi3 kmod-brcmfmac wpad-basic
 endef
 ifeq ($(SUBTARGET),bcm2710)
   TARGET_DEVICES += rpi-3