#
-# Copyright (C) 2006-2011 OpenWrt.org
+# Copyright (C) 2006-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
LOADADDR = 0x80010000 # RAM start + 64K
KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
+LOADER_ENTRY = 0x80a00000 # RAM start + 10M, for relocate
RAMSIZE = 0x02000000 # 32MB
LZMA_TEXT_START = 0x81800000 # 32MB - 8MB
RAMSIZE=$(RAMSIZE) \
LZMA_TEXT_START=$(LZMA_TEXT_START) \
+RELOCATE_MAKEOPTS= \
+ CACHELINE_SIZE=16 \
+ KERNEL_ADDR=$(KERNEL_ENTRY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ LZMA_TEXT_START=$(LOADER_ENTRY)
+
+define Build/Compile
+ rm -rf $(KDIR)/relocate
+ $(CP) ../../generic/image/relocate $(KDIR)
+ $(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS)
+endef
+
+### Kernel scripts ###
+define Build/append-dtb
+ $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
+ cat $@.dtb >> $@
+endef
+
+define Build/hcs-initramfs
+ $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \
+ --rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \
+ --output_file=$@.hcs --ldaddress=$(LOADADDR)
+ mv $@.hcs $@
+endef
+
+define Build/loader-lzma
+ rm -rf $@.src
+ $(MAKE) -C lzma-loader \
+ $(LOADER_MAKEOPTS) \
+ PKG_BUILD_DIR="$@.src" \
+ TARGET_DIR="$(dir $@)" \
+ LOADER_DATA="$@" \
+ LOADER_NAME="$(notdir $@)" \
+ compile loader.$(1)
+ mv "$@.$(1)" "$@"
+ rm -rf $@.src
+endef
+
+define Build/lzma
+ # CFE is a LZMA nazi! It took me hours to find out the parameters!
+ # Also I think lzma has a bug cause it generates different output depending on
+ # if you use stdin / stdout or not. Use files instead of stdio here, cause
+ # otherwise CFE will complain and not boot the image.
+ $(STAGING_DIR_HOST)/bin/lzma e $@ -d22 -fb64 -a1 $@.lzma
+ mv $@.lzma $@
+endef
+
+define Build/lzma-cfe
+ # Strip out the length, CFE doesn't like this
+ dd if=$@ of=$@.lzma.cfe bs=5 count=1
+ dd if=$@ of=$@.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+ mv $@.lzma.cfe $@
+endef
+
+define Build/relocate-kernel
+ # CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
+ # kernel might get larger than that, so let CFE unpack and load at a
+ # higher address and make the kernel relocate itself to the expected
+ # location.
+ ( \
+ dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
+ perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
+ cat $@ \
+ ) > $@.relocate
+ mv $@.relocate $@
+endef
+
+### Image scripts ###
define rootfspad/jffs2-128k
--align-rootfs
endef
$(shell expr substr "$(1)" 1 16)
endef
-TARGET_DTBS:=
-TARGET_IMAGES:=
+define Image/FileSystemStrip
+$(subst root.,,$(notdir $(1)))
+endef
-TARGET_Default_DTBS:=
-TARGET_Default_IMAGES:=
+define Build/cfe-bin
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(word 1,$^) -f $(word 2,$^) \
+ --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
+ --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
+ --info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \
+ --info2 "$(call Image/FileSystemStrip,$(word 2,$^))" \
+ $(call rootfspad/$(call Image/FileSystemStrip,$(word 2,$^))) \
+ $(CFE_EXTRAS) $(1)
+endef
-define Image/Build/CFE
- # Generate the tagged image
- $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
- --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
- --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
- --load-addr $(LOADADDR) --rsa-signature "$(5)" \
- --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
- $(call rootfspad/$(1)) \
- $(6) $(7) $(8) $(9)
+define Build/cfe-old-bin
+ $(TOPDIR)/scripts/brcmImage.pl -t -p \
+ -o $@ -b $(CFE_BOARD_ID) -c $(CFE_CHIP_ID) \
+ -e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \
+ -k $(word 1,$^) -r $(word 2,$^) \
+ $(CFE_EXTRAS)
endef
-define Image/Build/CFEDTB
- # Generate the tagged image
- $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \
- --output $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin \
- --boardid $(4) --chipid $(5) --entry $(KERNEL_ENTRY) \
- --load-addr $(LOADADDR) --info1 "-$(call Image/LimitName16,$(2))" \
- $(call rootfspad/$(1)) \
- --info2 $(1) $(6)
+define Build/cfe-spw303v-bin
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(word 1,$^) -f $(word 2,$^) \
+ --output $@ --boardid $(CFE_BOARD_ID) --chipid $(CFE_CHIP_ID) \
+ --entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
+ $(call rootfspad/$(call Image/FileSystemStrip,$(word 2,$^))) \
+ $(CFE_EXTRAS)
endef
-define Image/Build/OLDCFEDTB
- # Generate the tagged image
- $(TOPDIR)/scripts/brcmImage.pl -t -p \
- -b $(4) -c $(5) -e $(KERNEL_ENTRY) -a $(LOADADDR) \
- -k $(KDIR)/vmlinux-$(3).lzma.cfe -r $(KDIR)/root.$(1) \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin $(6)
-endef
-
-define Image/Build/SPW303VCFEDTB
- # Generate the tagged image
- $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \
- --output $(BIN_DIR)/openwrt-$(2)-$(1).tmp \
- --boardid $(4) --chipid $(5) --entry $(KERNEL_ENTRY) \
- $(call rootfspad/$(1)) \
- --load-addr $(LOADADDR) $(6)
- # Fix up header
- $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(2)-$(1).tmp \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe-sysupgrade.bin
- $(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(2)-$(1)-cfe-sysupgrade.bin \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe-factory.bin
- rm -f $(BIN_DIR)/openwrt-$(2)-$(1).tmp
-endef
-
-define Image/Build/ZYXCFEDTB
- # Generate the tagged image
- $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux-$(3).lzma.cfe -f $(KDIR)/root.$(1) \
- --output $(BIN_DIR)/openwrt-$(2)-$(1).tmp \
- --boardid $(4) --chipid $(5) --entry $(KERNEL_ENTRY) \
- --load-addr $(LOADADDR) --info1 "-$(call Image/LimitName16,$(2))" \
- $(call rootfspad/$(1)) \
- --info2 $(1) $(6)
- # Fix up header
- $(STAGING_DIR_HOST)/bin/zyxbcm -i $(BIN_DIR)/openwrt-$(2)-$(1).tmp \
- -o $(BIN_DIR)/openwrt-$(2)-$(1)-zyxcfe.bin
- rm -f $(BIN_DIR)/openwrt-$(2)-$(1).tmp
-endef
-
-define Image/Build/RedBootDTB
- gzip -9 -c $(KDIR)/vmlinux-$(3) > $(KDIR)/vmlinux-$(3).bin.gz
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux-$(3) $(KDIR)/vmlinux-$(3).bin.l7
- dd if=$(KDIR)/vmlinux-$(3).bin.l7 of=$(BIN_DIR)/openwrt-$(2)-vmlinux.lzma bs=65536 conv=sync
- dd if=$(KDIR)/vmlinux-$(3).bin.gz of=$(BIN_DIR)/openwrt-$(2)-vmlinux.gz bs=65536 conv=sync
-endef
-
-define Image/Build/HCSDTB
- $(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_byte=$(4) \
- --rev_maj=$(5) --rev_min=$(6) --input_file=$(KDIR)/$(7) \
- --output_file=$(BIN_DIR)/openwrt-$(2)-$(1).bin
-endef
-
-define Build/Clean
- $(MAKE) -C lzma-loader clean
-endef
-
-define Image/PrepareLoader
- # Standard LZMA kernel
- $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma
-
- # Build the LZMA loader
- rm -rf $(KDIR)/lzma-loader
- $(MAKE) -C lzma-loader \
- $(LOADER_MAKEOPTS) \
- BUILD_DIR="$(KDIR)" \
- TARGET_DIR="$(2)" \
- LOADER_DATA="$(KDIR)/vmlinux$(1).lzma" \
- LOADER=$(IMG_PREFIX)-loader$(1) \
- compile $(3)
+define Build/spw303v-bin
+ $(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
+ mv $@.spw303v $@
+endef
- rm -f $(KDIR)/vmlinux$(1).lzma
+define Build/xor-image
+ $(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor
+ mv $@.xor $@
endef
-define Image/PrepareLoaderDTB
- # append dtb to vmlinux, then build a standard LZMA loader
- cat $(KDIR)/vmlinux$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/vmlinux$(1)-$(2)
- $(call Image/PrepareLoader,$(1)-$(2),$(3),$(4))
+define Build/zyxel-bin
+ $(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel
+ mv $@.zyxel $@
endef
-define Image/PrepareCFELzmaKernel
- # CFE is a LZMA nazi! It took me hours to find out the parameters!
- # Also I think lzma has a bug cause it generates different output depending on
- # if you use stdin / stdout or not. Use files instead of stdio here, cause
- # otherwise CFE will complain and not boot the image.
- $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux$(1) $(KDIR)/vmlinux$(1).lzma.tmp
+define Build/redboot-bin
+ # Prepare kernel and rootfs
+ dd if=$(word 1,$^) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync
+ dd if=$(word 2,$^) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) bs=64k conv=sync
+ echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^))
+ # Generate the scripted image
+ $(TOPDIR)/scripts/redboot-script.pl \
+ -k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \
+ -r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^)) \
+ -a $(strip $(LOADADDR)) -f 0xbe430000 -l 0x7c0000 \
+ -s 0x1000 -t 20 -o $@.redbootscript
+ dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync
+ cat \
+ "$@.redbootscript.padded" \
+ "$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \
+ "$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(word 2,$^))" \
+ > "$@"
+endef
- # Strip out the length, CFE doesn't like this
- dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe bs=5 count=1
- dd if=$(KDIR)/vmlinux$(1).lzma.tmp of=$(KDIR)/vmlinux$(1).lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
- rm -f $(KDIR)/vmlinux$(1).lzma.tmp
-endef
-
-define Image/PrepareCFELzmaKernelDTB
- # compile the dts (the dtb will be later reused for the lzma loader)
- $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(DTS_DIR)/$(1).dtb ../dts/$(1).dts
- cat $(KDIR)/vmlinux $(DTS_DIR)/$(1).dtb > $(KDIR)/vmlinux-$(1)
- $(call Image/PrepareCFELzmaKernel,-$(1))
-endef
-
-define Image/Prepare
- $(call Image/PrepareCFELzmaKernel,)
-
- $(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), $(call Image/PrepareCFELzmaKernelDTB,$(board)))
-
- ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- $(call Image/PrepareLoader,-initramfs,$(BIN_DIR),loader.elf)
- $(foreach board,$(sort $(TARGET_$(PROFILE)_DTBS)), \
- $(call Image/PrepareLoaderDTB,-initramfs,$(board),$(BIN_DIR),loader.elf))
- ifneq (,$(findstring cvg834g,$(TARGET_$(PROFILE)_DTBS)))
- $(call Image/PrepareLoaderDTB,-initramfs,cvg834g,$(KDIR),loader.bin)
- endif
- endif
-endef
-
-define Image/Build/Initramfs
- # Netgear CVG834G
- ifneq (,$(findstring cvg834g,$(TARGET_$(PROFILE)_DTBS)))
- $(call Image/Build/HCSDTB,initramfs,cvg834g,cvg834g,a020,0001,0022,$(IMG_PREFIX)-loader-initramfs-cvg834g.bin)
- endif
-endef
-
-# $(1) = Image build
-# $(2) = Profile
-# $(3) = imagename
-# $(4) = dtb
-# $(5) = boardname
-# $(6) = chipid
-# $(7) = additional options
-define ImageDTB
- define Image/Build/$(3)
- $$(call Image/Build/$(1),$$(1),$(3),$(4),$(5),$(6),$(7),$(8))
+# Shared device definition: applies to every defined device
+define Device/Default
+ PROFILES = Default $$(DEVICE_PROFILE)
+ KERNEL_INITRAMFS_IMAGE = $$(KERNEL_INITRAMFS_PREFIX).elf
+ DEVICE_PROFILE :=
+ DEVICE_DTS :=
+endef
+DEVICE_VARS += DEVICE_PROFILE DEVICE_DTS
+
+# BCM33xx HCS devices: only generates ramdisks (unsupported bin images)
+define Device/bcm33xxHcsRamdisk
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma bin | hcs-initramfs
+ IMAGES :=
+ HCS_MAGIC_BYTES :=
+ HCS_REV_MIN :=
+ HCS_REV_MAJ :=
+endef
+DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ
+
+# Shared BCM63xx CFE device definitios
+define Device/bcm63xxCfeCommon
+ FILESYSTEMS := squashfs jffs2-64k jffs2-128k
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | lzma-cfe
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
+endef
+
+# BCM63xx CFE devices: only generates ramdisks (unsupported bin images)
+define Device/bcm63xxCfeRamdisk
+ $(Device/bcm63xxCfeCommon)
+ IMAGES :=
+endef
+
+# BCM63xx CFE devices: both ramdisks and parallel/spi bin images
+# New versions of CFE bootloader compatible with imagetag
+define Device/bcm63xxCfe
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := cfe.bin
+ IMAGE/cfe.bin := cfe-bin
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+endef
+DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS
+
+# BCM63xx CFE BC221 devices: both ramdisks and parallel/spi bin images
+# Generates a generic image and a layout version 5 image
+define Device/bcm63xxCfeBc221
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := cfe.bin cfe-bc221.bin
+ IMAGE/cfe.bin := cfe-bin
+ IMAGE/cfe-bc221.bin := cfe-bin --layoutver 5
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+endef
+
+# BCM63xx CFE MultiFlash devices: both ramdisks and parallel/spi bin images
+# Generates generic images padded for 4M/8M/16M flashes
+define Device/bcm63xxCfeMultiFlash
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
+ IMAGE/cfe-4M.bin := cfe-bin --pad 2
+ IMAGE/cfe-8M.bin := cfe-bin --pad 4
+ IMAGE/cfe-16M.bin := cfe-bin --pad 8
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+endef
+
+# BCM63xx CFE NETGEAR devices: both ramdisks and parallel/spi bin images
+# factory.chk: netgear images for bootloader/original firmware upgrades
+# sysupgrade.bin: openwrt images for sysupgrades
+define Device/bcm63xxCfeNetgear
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := factory.chk sysupgrade.bin
+ IMAGE/factory.chk := cfe-bin | netgear-chk
+ IMAGE/sysupgrade.bin := cfe-bin
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+ NETGEAR_BOARD_ID :=
+ NETGEAR_REGION :=
+endef
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
+
+# BCM63xx Old CFE devices: both ramdisks and parallel/spi bin images
+# Old versions of CFE bootloader not compatible with imagetag
+define Device/bcm63xxCfeOld
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := cfe-old.bin
+ IMAGE/cfe-old.bin := cfe-old-bin
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+endef
+
+# BCM63xx CFE SPW303V devices: both ramdisks and parallel/spi bin images
+# factory.bin: SPW303V images for bootloader/original firmware upgrades
+# sysupgrade.bin: openwrt images for sysupgrades
+define Device/bcm63xxCfeSpw303v
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := cfe-spw303v-bin | spw303v-bin | xor-image
+ IMAGE/sysupgrade.bin := cfe-spw303v-bin | spw303v-bin
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+endef
+
+# BCM63xx CFE ZyXEL devices: both ramdisks and parallel/spi bin images
+# factory.bin: ZyXEL specific CFE images (sysupgrade compatible)
+define Device/bcm63xxCfeZyxel
+ $(Device/bcm63xxCfeCommon)
+ IMAGES := factory.bin
+ IMAGE/factory.bin := cfe-bin | zyxel-bin
+ CFE_BOARD_ID :=
+ CFE_CHIP_ID :=
+ CFE_EXTRAS :=
+endef
+
+# BCM63xx RedBoot devices: both ramdisks and parallel/spi bin images
+# Generates images compatible with RedBoot bootloader
+define Device/bcm63xxRedBoot
+ FILESYSTEMS := squashfs
+ KERNEL := kernel-bin | append-dtb | gzip
+ IMAGES := redboot.bin
+ IMAGE/redboot.bin := redboot-bin
+ REDBOOT_PREFIX := $$(IMAGE_PREFIX)
+endef
+DEVICE_VARS += REDBOOT_PREFIX
+
+### Device macros ###
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = hcs magic bytes
+# $(5) = hcs rev min
+# $(6) = hcs rev major
+define bcm33xxHcsRamdisk
+ define Device/$(2)
+ $$(Device/bcm33xxHcsRamdisk)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ HCS_MAGIC_BYTES := $(4)
+ HCS_REV_MIN := $(5)
+ HCS_REV_MAJ := $(6)
+ endef
+ TARGET_DEVICES += $(2)
+endef
+
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+define bcm63xxCfeRamdisk
+ define Device/$(2)
+ $$(Device/bcm63xxCfeRamdisk)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
endef
+ TARGET_DEVICES += $(2)
+endef
- TARGET_Default_DTBS += $(4)
- TARGET_Default_IMAGES += $(3)
- TARGET_$(2)_DTBS += $(4)
- TARGET_$(2)_IMAGES += $(3)
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+define bcm63xxCfe
+ define Device/$(2)
+ $$(Device/bcm63xxCfe)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ endef
+ TARGET_DEVICES += $(2)
endef
-define Image/Build
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+define bcm63xxCfeMultiFlash
+ define Device/$(2)
+ $$(Device/bcm63xxCfeMultiFlash)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ endef
+ TARGET_DEVICES += $(2)
+endef
- # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
- $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
- # RTA1320_16M (numerous routers)
- $(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5)
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+define bcm63xxCfeBc221
+ define Device/$(2)
+ $$(Device/bcm63xxCfeBc221)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ endef
+ TARGET_DEVICES += $(2)
+endef
- # build dtb image list
- $(foreach image,$(TARGET_$(PROFILE)_IMAGES),$(call Image/Build/$(image),$(1)))
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+# $(7) = netgear id
+# $(8) = netgear region
+define bcm63xxCfeNetgear
+ define Device/$(2)
+ $$(Device/bcm63xxCfeNetgear)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ NETGEAR_BOARD_ID := $(7)
+ NETGEAR_REGION := $(8)
+ endef
+ TARGET_DEVICES += $(2)
+endef
- ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- $(call Image/Build/Initramfs)
- endif
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+define bcm63xxCfeOld
+ define Device/$(2)
+ $$(Device/bcm63xxCfeOld)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ endef
+ TARGET_DEVICES += $(2)
+endef
+
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+define bcm63xxCfeSpw303v
+ define Device/$(2)
+ $$(Device/bcm63xxCfeSpw303v)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ endef
+ TARGET_DEVICES += $(2)
+endef
+
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+# $(4) = cfe board name
+# $(5) = cfe chip id
+# $(6) = cfe additional options
+define bcm63xxCfeZyxel
+ define Device/$(2)
+ $$(Device/bcm63xxCfeZyxel)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ CFE_BOARD_ID := $(4)
+ CFE_CHIP_ID := $(5)
+ CFE_EXTRAS := $(6)
+ endef
+ TARGET_DEVICES += $(2)
+endef
+
+# $(1) = profile
+# $(2) = image name
+# $(3) = dts
+define bcm63xxRedBoot
+ define Device/$(2)
+ $$(Device/bcm63xxRedBoot)
+ DEVICE_PROFILE := $(1)
+ DEVICE_DTS := $(3)
+ endef
+ TARGET_DEVICES += $(2)
endef
+### Devices ###
# Generic 963281TAN
-$(eval $(call ImageDTB,CFEDTB,963281TAN,963281TAN-4M-flash-generic,bcm963281TAN,963281TAN,6328,--pad 2))
-$(eval $(call ImageDTB,CFEDTB,963281TAN,963281TAN-8M-flash-generic,bcm963281TAN,963281TAN,6328,--pad 4))
-$(eval $(call ImageDTB,CFEDTB,963281TAN,963281TAN-16M-flash-generic,bcm963281TAN,963281TAN,6328,--pad 8))
+$(eval $(call bcm63xxCfeMultiFlash,963281TAN,963281TAN-generic,bcm963281TAN,963281TAN,6328))
# Generic 96328avng
-$(eval $(call ImageDTB,CFEDTB,96328avng,96328avng-4M-flash-generic,bcm96328avng,96328avng,6328,--pad 2))
-$(eval $(call ImageDTB,CFEDTB,96328avng,96328avng-8M-flash-generic,bcm96328avng,96328avng,6328,--pad 4))
-$(eval $(call ImageDTB,CFEDTB,96328avng,96328avng-16M-flash-generic,bcm96328avng,96328avng,6328,--pad 8))
+$(eval $(call bcm63xxCfeMultiFlash,96328avng,96328avng-generic,bcm96328avng,96328avng,6328))
# Generic 96338GW
-$(eval $(call ImageDTB,CFEDTB,96338GW,96338GW-generic,bcm96338GW,6338GW,6338))
+$(eval $(call bcm63xxCfe,96338GW,96338GW-generic,bcm96338GW,6338GW,6338))
# Generic 96338W
-$(eval $(call ImageDTB,CFEDTB,96338W,96338W-generic,bcm96338W,6338W,6338))
+$(eval $(call bcm63xxCfe,96338W,96338W-generic,bcm96338W,6338W,6338))
# Generic 96345GW2
-$(eval $(call ImageDTB,CFEDTB,96345GW2,96345GW2-generic,bcm96345GW2,96345GW2,6345))
-$(eval $(call ImageDTB,CFEDTB,96345GW2,96345GW2-bc221,bcm96345GW2,96345GW2,6345,--layoutver 5))
+$(eval $(call bcm63xxCfeBc221,96345GW2,96345GW2-generic,bcm96345GW2,96345GW2,6345))
# Generic 96348GW
-$(eval $(call ImageDTB,CFEDTB,96348GW,96348GW-generic,bcm96348GW,96348GW,6348))
-$(eval $(call ImageDTB,CFEDTB,96348GW,96348GW-bc221,bcm96348GW,96348GW,6348,--layoutver 5))
+$(eval $(call bcm63xxCfeBc221,96348GW,96348GW-generic,bcm96348GW,96348GW,6348))
# Generic 96348GW-10
-$(eval $(call ImageDTB,CFEDTB,96348GW_10,96348GW-10-generic,bcm96348GW-10,96348GW-10,6348))
+$(eval $(call bcm63xxCfe,96348GW_10,96348GW-10-generic,bcm96348GW-10,96348GW-10,6348))
# Generic 96348GW-11
-$(eval $(call ImageDTB,CFEDTB,96348GW_11,96348GW-11-generic,bcm96348GW-11,96348GW-11,6348))
+$(eval $(call bcm63xxCfe,96348GW_11,96348GW-11-generic,bcm96348GW-11,96348GW-11,6348))
# Generic 96348R
-$(eval $(call ImageDTB,CFEDTB,96348R,96348R-generic,bcm96348R,96348R,6348))
+$(eval $(call bcm63xxCfe,96348R,96348R-generic,bcm96348R,96348R,6348))
# Generic 96358VW
-$(eval $(call ImageDTB,CFEDTB,96358VW,96358VW-generic,bcm96358VW,96358VW,6358))
+$(eval $(call bcm63xxCfe,96358VW,96358VW-generic,bcm96358VW,96358VW,6358))
# Generic 96358VW2
-$(eval $(call ImageDTB,CFEDTB,96358VW2,96358VW2-generic,bcm96358VW2,96358VW2,6358))
+$(eval $(call bcm63xxCfe,96358VW2,96358VW2-generic,bcm96358VW2,96358VW2,6358))
# Generic 96368MVNgr
-$(eval $(call ImageDTB,CFEDTB,96368MVNgr,96368MVNgr-generic,bcm96368MVNgr,96368MVNgr,6368))
+$(eval $(call bcm63xxCfe,96368MVNgr,96368MVNgr-generic,bcm96368MVNgr,96368MVNgr,6368))
# Generic 96368MVWG
-$(eval $(call ImageDTB,CFEDTB,96368MVWG,96368MVWG-generic,bcm96368MVWG,96368MVWG,6368))
+$(eval $(call bcm63xxCfe,96368MVWG,96368MVWG-generic,bcm96368MVWG,96368MVWG,6368))
# ADB P.DG A4001N
-$(eval $(call ImageDTB,CFEDTB,A4001N,A4001N,a4001n,96328dg2x2,6328,--pad 8))
+$(eval $(call bcm63xxCfe,A4001N,A4001N,a4001n,96328dg2x2,6328,--pad 4))
# ADB P.DG A4001N1
-$(eval $(call ImageDTB,CFEDTB,A4001N1,A4001N1,a4001n1,963281T_TEF,6328,--pad 8))
+$(eval $(call bcm63xxCfe,A4001N1,A4001N1,a4001n1,963281T_TEF,6328,--pad 8))
# Alcatel RG100A
-$(eval $(call ImageDTB,CFEDTB,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x20000 --image-offset 0x20000))
+$(eval $(call bcm63xxCfe,RG100A,RG100A,rg100a,96358VW2,6358,--block-size 0x20000 --image-offset 0x20000))
# Asmax AR 1004g
-$(eval $(call ImageDTB,CFEDTB,AR1004G,AR1004G,ar1004g,96348GW-10,6348))
+$(eval $(call bcm63xxCfe,AR1004G,AR1004G,ar1004g,96348GW-10,6348))
# Belkin F5D7633
-$(eval $(call ImageDTB,CFEDTB,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000))
+$(eval $(call bcm63xxCfe,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000))
+# Broadcom BCM96318REF
+$(eval $(call bcm63xxCfeRamdisk,BCM96318REF,BCM96318REF,bcm96318ref,96318REF,6318))
+# Broadcom BCM96318REF_P300
+$(eval $(call bcm63xxCfeRamdisk,BCM96318REF_P300,BCM96318ref_P300,bcm96318ref_p300,96318REF_P300,6318))
+# Broadcom BCM963268BU_P300
+$(eval $(call bcm63xxCfeRamdisk,BCM963268BU_P300,BCM963268BU_P300,bcm963268bu_p300,963268BU_P300,63268))
+# Broadcom BCM963269BHR
+$(eval $(call bcm63xxCfeRamdisk,BCM963269BHR,BCM963269BHR,bcm963269bhr,963269BHR,63268))
+# BT Home Hub 2.0 A
+$(eval $(call bcm63xxCfe,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000))
+# BT Voyager V2110, V2110_AA, V2110_ROI
+$(eval $(call bcm63xxCfe,BTV2110,BTV2110,v2110,V2110,6348,--layoutver 5))
+# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
+$(eval $(call bcm63xxCfe,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5))
# Comtrend AR-5381u
-$(eval $(call ImageDTB,CFEDTB,AR5381u,AR-5381u,ar-5381u,96328A-1241N,6328,--pad 8))
+$(eval $(call bcm63xxCfe,AR5381u,AR-5381u,ar-5381u,96328A-1241N,6328,--pad 8))
# Comtrend AR-5387un
-$(eval $(call ImageDTB,CFEDTB,AR5387un,AR-5387un,ar-5387un,96328A-1441N1,6328,--pad 8))
+$(eval $(call bcm63xxCfe,AR5387un,AR-5387un,ar-5387un,96328A-1441N1,6328,--pad 8))
# Comtrend 536, 5621
-$(eval $(call ImageDTB,CFEDTB,CT536_CT5621,CT536_CT5621,ct536plus,96348GW-11,6348))
+$(eval $(call bcm63xxCfe,CT536_CT5621,CT536_CT5621,ct536plus,96348GW-11,6348))
# Comtrend CT-5365
-$(eval $(call ImageDTB,CFEDTB,CT5365,CT-5365,ct-5365,96348A-122,6348))
+$(eval $(call bcm63xxCfe,CT5365,CT-5365,ct-5365,96348A-122,6348))
# Comtrend CT-6373
-$(eval $(call ImageDTB,CFEDTB,CT6373,CT-6373,ct-6373,CT6373-1,6358))
+$(eval $(call bcm63xxCfe,CT6373,CT-6373,ct-6373,CT6373-1,6358))
# Comtrend VR-3025u
-$(eval $(call ImageDTB,CFEDTB,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000))
+$(eval $(call bcm63xxCfe,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000))
# Comtrend VR-3025un
-$(eval $(call ImageDTB,CFEDTB,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4))
+$(eval $(call bcm63xxCfe,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4))
+# Comtrend VR-3026e
+$(eval $(call bcm63xxCfe,VR3026e,VR-3026e,vr-3026e,96368MT-1341N1,6368,--pad 4))
# Comtrend WAP-5813n
-$(eval $(call ImageDTB,CFEDTB,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4))
+$(eval $(call bcm63xxCfe,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4))
# D-Link DSL-2640B, rev B2
-$(eval $(call ImageDTB,CFEDTB,DSL2640B-B2,DSL2640B_B,dsl-2640b-b,D-4P-W,6348))
+$(eval $(call bcm63xxCfe,DSL2640B-B2,DSL2640B_B,dsl-2640b-b,D-4P-W,6348))
+# D-Link DSL-2640U, rev C1
+$(eval $(call bcm63xxCfe,DSL2640U,DSL2640U,dsl-2640u,96338W2_E7T,6338))
# D-Link DSL-2650U
-$(eval $(call ImageDTB,CFEDTB,DSL2650U,DSL2650U,dsl-2650u,96358VW2,6358))
+$(eval $(call bcm63xxCfe,DSL2650U,DSL2650U,dsl-2650u,96358VW2,6358))
# D-Link DSL-2740B/DSL-2741B, rev C2
-$(eval $(call ImageDTB,CFEDTB,DSL274XB_C,DSL274XB-C2,dsl-274xb-c,96358GW,6358))
+$(eval $(call bcm63xxCfe,DSL274XB_C,DSL274XB-C2,dsl-274xb-c,96358GW,6358))
# D-Link DSL-2740B/DSL-2741B, rev C3
-$(eval $(call ImageDTB,CFEDTB,DSL274XB_C,DSL274XB-C3,dsl-274xb-c,AW4139,6358))
+$(eval $(call bcm63xxCfe,DSL274XB_C,DSL274XB-C3,dsl-274xb-c,AW4139,6358))
# D-Link DSL-2740B/DSL-2741B, rev F1
-$(eval $(call ImageDTB,CFEDTB,DSL274XB_F,DSL274XB-F1-EU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.EUF1" --pad 4))
-$(eval $(call ImageDTB,CFEDTB,DSL274XB_F,DSL274XB-F1-AU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.AUF1" --pad 4))
+$(eval $(call bcm63xxCfe,DSL274XB_F,DSL274XB-F1-EU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.EUF1" --pad 4))
+$(eval $(call bcm63xxCfe,DSL274XB_F,DSL274XB-F1-AU,dsl-274xb-f,AW4339U,6328,--signature2 "4.06.01.AUF1" --pad 4))
+# D-Link DSL-2750B/DSL-2751, rev D1
+$(eval $(call bcm63xxCfe,DSL275XB_D,DSL275XB-D1,dsl-275xb-d,AW5200B,6318,--pad 4))
# D-Link DVA-G3810BN/TL
-$(eval $(call ImageDTB,CFEDTB,DVAG3810BN,DVAG3810BN,dva-g3810bn_tl,96358VW,6358))
+$(eval $(call bcm63xxCfe,DVAG3810BN,DVAG3810BN,dva-g3810bn_tl,96358VW,6358))
# Davolink DV-201AMR
-$(eval $(call ImageDTB,OLDCFEDTB,DV201AMR,DV-201AMR,dv-201amr,DV201AMR,6348))
+$(eval $(call bcm63xxCfeOld,DV201AMR,DV-201AMR,dv-201amr,DV201AMR,6348))
+# Dynalink RTA770BW (Siemens SE515)
+$(eval $(call bcm63xxCfeRamdisk,RTA770BW,RTA770BW,rta770bw,RTA770BW,6345,--layoutver 5))
+# Dynalink RTA770W
+$(eval $(call bcm63xxCfeRamdisk,RTA770W,RTA770W,rta770w,RTA770W,6345,--layoutver 5))
# Dynalink RTA1025W (numerous routers)
-$(eval $(call ImageDTB,CFEDTB,RTA1025W,RTA1025W_16,rta1025w,RTA1025W_16,6348,--layoutver 5))
+$(eval $(call bcm63xxCfe,RTA1025W,RTA1025W_16,rta1025w,RTA1025W_16,6348,--layoutver 5))
+# Dynalink RTA1320 (numerous routers)
+$(eval $(call bcm63xxCfe,RTA1320,RTA1320_16M,rta1320,RTA1320_16M,6338,--layoutver 5))
# Huawei HG520v
-$(eval $(call ImageDTB,CFEDTB,HG520v,HG520v,hg520v,HW6358GW_B,6358,--rsa-signature "EchoLife_HG520v"))
+$(eval $(call bcm63xxCfe,HG520v,HG520v,hg520v,HW6358GW_B,6358,--rsa-signature "EchoLife_HG520v"))
# Huawei HG553
-$(eval $(call ImageDTB,CFEDTB,HG553,HG553,hg553,HW553,6358,--rsa-signature "EchoLife_HG553" --image-offset 0x20000 --block-size 0x20000 --tag-version 7))
+$(eval $(call bcm63xxCfe,HG553,HG553,hg553,HW553,6358,--rsa-signature "EchoLife_HG553" --image-offset 0x20000 --block-size 0x20000 --tag-version 7))
# Huawei HG556a
-$(eval $(call ImageDTB,CFEDTB,HG556a_AB,HG556a_A,hg556a-a,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x10000 --tag-version 8))
-$(eval $(call ImageDTB,CFEDTB,HG556a_AB,HG556a_B,hg556a-b,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
-$(eval $(call ImageDTB,CFEDTB,HG556a_C,HG556a_C,hg556a-c,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
+$(eval $(call bcm63xxCfe,HG556a_AB,HG556a_A,hg556a-a,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x10000 --tag-version 8))
+$(eval $(call bcm63xxCfe,HG556a_AB,HG556a_B,hg556a-b,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
+$(eval $(call bcm63xxCfe,HG556a_C,HG556a_C,hg556a-c,HW556,6358,--rsa-signature "EchoLife_HG556a" --image-offset 0x20000 --block-size 0x20000 --tag-version 8))
+# Huawei HG655b
+$(eval $(call bcm63xxCfe,HG655b,HG655b,hg655b,HW65x,6368,--image-offset 0x20000 --tag-version 7 --pad 4))
+# Inteno VG50
+$(eval $(call bcm63xxCfeRamdisk,VG50,vg50,vg50,VW6339GU,63268))
# Inventel Livebox 1
-$(eval $(call ImageDTB,RedBootDTB,Livebox,livebox,livebox-blue-5g))
+$(eval $(call bcm63xxRedBoot,Livebox,livebox,livebox-blue-5g))
# Netgear CVG834G
-$(eval $(call ImageDTB,HCSDTB,CVG834G,,cvg834g,a020,0001,0022,vmlinux-cvg834g))
+$(eval $(call bcm33xxHcsRamdisk,CVG834G,cvg834g,cvg834g,0xa020,0001,0022))
# Netgear DG834GT/PN
-$(eval $(call ImageDTB,CFEDTB,DG834GTPN,DG834GT_PN,dg834gtpn,96348GW-10,6348))
+$(eval $(call bcm63xxCfe,DG834GTPN,DG834GT_PN,dg834gtpn,96348GW-10,6348))
+# Netgear DG834G v4
+$(eval $(call bcm63xxCfeRamdisk,DG834GV4,DG834GTv4,dg834g_v4,96348W3,6348))
+# Netgear DGND3700 v1
+$(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3700v1,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T01_NETGEAR_NEWLED,1))
+# Netgear DGND3800B
+$(eval $(call bcm63xxCfeNetgear,DGND3700v1_3800B,DGND3800B,dgnd3700v1,96368MVWG,6368,--image-offset 0x20000 --block-size 0x20000,U12L144T11_NETGEAR_NEWLED,1))
+# NuCom R5010UNv2
+$(eval $(call bcm63xxCfe,R5010UNV2,R5010UNv2,r5010unv2,96328ang,6328,--pad 8))
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
-$(eval $(call ImageDTB,CFEDTB,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
+$(eval $(call bcm63xxCfe,AGPF_S0,AGV2+W,agpf-s0,AGPF-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
# Pirelli A226G
-$(eval $(call ImageDTB,CFEDTB,A226G,A226G,a226g,DWV-S0,6358,--signature2 IMAGE --tag-version 8))
+$(eval $(call bcm63xxCfe,A226G,A226G,a226g,DWV-S0,6358,--signature2 IMAGE --tag-version 8))
# Pirelli A226M/A226M-FWB
-$(eval $(call ImageDTB,CFEDTB,A226M,A226M,a226m,DWV-S0,6358,--signature2 IMAGE --tag-version 8))
-$(eval $(call ImageDTB,CFEDTB,A226M,A226M-FWB,a226m-fwb,DWV-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
+$(eval $(call bcm63xxCfe,A226M,A226M,a226m,DWV-S0,6358,--signature2 IMAGE --tag-version 8))
+$(eval $(call bcm63xxCfe,A226M,A226M-FWB,a226m-fwb,DWV-S0,6358,--block-size 0x20000 --image-offset 0x20000 --signature2 IMAGE --tag-version 8))
# Sagem F@ST2404
-$(eval $(call ImageDTB,CFEDTB,FAST2404,F@ST2404,fast2404,F@ST2404,6348))
+$(eval $(call bcm63xxCfe,FAST2404,F@ST2404,fast2404,F@ST2404,6348))
# Sagem F@ST2504n
-$(eval $(call ImageDTB,CFEDTB,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362))
+$(eval $(call bcm63xxCfe,FAST2504n,F@ST2504n,fast2504n,F@ST2504n,6362))
# Sagem F@ST2604
-$(eval $(call ImageDTB,CFEDTB,FAST2604,F@ST2604,fast2604,F@ST2604,6348))
+$(eval $(call bcm63xxCfe,FAST2604,F@ST2604,fast2604,F@ST2604,6348))
+# Sagem F@ST2704N V1 / Plusnet F@ST2704N V1
+$(eval $(call bcm63xxCfe,FAST2704N,FAST2704N,fast2704n,F@ST2704N,6318,--pad 4))
# Sagem F@ST2704V2
-$(eval $(call ImageDTB,CFEDTB,FAST2704V2,F@ST2704V2,fast2704v2,F@ST2704V2,6328))
+$(eval $(call bcm63xxCfe,FAST2704V2,F@ST2704V2,fast2704v2,F@ST2704V2,6328))
# SFR Neufbox 4
-$(eval $(call ImageDTB,CFEDTB,Neufbox4,NEUFBOX4-SER,nb4-ser-r0,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)"))
-$(eval $(call ImageDTB,CFEDTB,Neufbox4,NEUFBOX4-FXC,nb4-fxc-r1,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)"))
+$(eval $(call bcm63xxCfe,Neufbox4,NEUFBOX4-SER,nb4-ser-r0,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)"))
+$(eval $(call bcm63xxCfe,Neufbox4,NEUFBOX4-FXC,nb4-fxc-r1,96358VW,6358,--rsa-signature "OpenWRT-$(REVISION)"))
# SFR Neufbox 6
-$(eval $(call ImageDTB,CFEDTB,Neufbox6,NEUFBOX6,nb6-ser-r0,NB6-SER-r0,6362,--rsa-signature "OpenWRT-$(REVISION)"))
+$(eval $(call bcm63xxCfe,Neufbox6,NEUFBOX6,nb6-ser-r0,NB6-SER-r0,6362,--rsa-signature "OpenWRT-$(REVISION)"))
# T-Com Speedport W 303V Typ B
-$(eval $(call ImageDTB,SPW303VCFEDTB,SPW303V,SPW303V,spw303v,96358-502V,6358,--pad 4))
+$(eval $(call bcm63xxCfeSpw303v,SPW303V,SPW303V,spw303v,96358-502V,6358,--pad 4))
# T-Com Speedport W 500V
-$(eval $(call ImageDTB,CFEDTB,SPW500V,SPW500V,spw500v,96348GW,6348))
+$(eval $(call bcm63xxCfe,SPW500V,SPW500V,spw500v,96348GW,6348))
# Tecom GW6000
-$(eval $(call ImageDTB,CFEDTB,GW6000,GW6000,gw6000,96348GW,6348))
+$(eval $(call bcm63xxCfe,GW6000,GW6000,gw6000,96348GW,6348))
# Tecom GW6200
-$(eval $(call ImageDTB,CFEDTB,GW6200,GW6200,gw6200,96348GW,6348,--rsa-signature "$(shell printf '\x99')"))
+$(eval $(call bcm63xxCfe,GW6200,GW6200,gw6200,96348GW,6348,--rsa-signature "$(shell printf '\x99')"))
+# Telsey CPVA502+
+$(eval $(call bcm63xxCfeRamdisk,CPVA502PLUS,CVPA502PLUS,cpva502plus,CPVA502+,6348,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0"))
# Telsey CPVA642-type (e.g. CPA-ZNTE60T)
-$(eval $(call ImageDTB,CFEDTB,CPVA642,CPA-ZNTE60T,cpva642,CPVA642,6358,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0" --pad 4))
+$(eval $(call bcm63xxCfe,CPVA642,CPA-ZNTE60T,cpva642,CPVA642,6358,--signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0" --pad 4))
+# Telsey MAGIC (Alice W-Gate)
+$(eval $(call bcm63xxCfeRamdisk,MAGIC,MAGIC,magic,MAGIC,6348))
# TP-Link TD-W8900GB
-$(eval $(call ImageDTB,CFEDTB,TDW8900GB,TD-W8900GB,td-w8900gb,96348GW-11,6348,--rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')" --image-offset 0x20000))
+$(eval $(call bcm63xxCfe,TDW8900GB,TD-W8900GB,td-w8900gb,96348GW-11,6348,--rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')" --image-offset 0x20000))
# USRobotics 9108
-$(eval $(call ImageDTB,CFEDTB,USR9108,USR9108,usr9108,96348GW-A,6348))
+$(eval $(call bcm63xxCfe,USR9108,USR9108,usr9108,96348GW-A,6348))
# ZyXEL P870HW-51a v2
-$(eval $(call ImageDTB,ZYXCFEDTB,P870HW_51a_v2,96368VVW,p870hw-51a-v2,6368,P870HW-51a_v2,--rsa-signature "ZyXEL" --signature "ZyXEL_0001"))
+$(eval $(call bcm63xxCfeZyxel,P870HW_51a_v2,P870HW-51a_v2,p870hw-51a-v2,96368VVW,6368,--rsa-signature "ZyXEL" --signature "ZyXEL_0001"))
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff