/*
* ar8216.c: AR8216 switch driver
*
- * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or
if (ret & BMCR_ANENABLE)
return 0;
- dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n");
+ dev_info(&phydev->mdio.dev, "ANEG disabled, re-enabling ...\n");
ret |= BMCR_ANENABLE | BMCR_ANRESTART;
return phy_write(phydev, MII_BMCR, ret);
}
mutex_unlock(&bus->mdio_lock);
}
+static inline void
+ar8xxx_phy_mmd_prep(struct mii_bus *bus, int phy_addr, u16 addr, u16 reg)
+{
+ bus->write(bus, phy_addr, MII_ATH_MMD_ADDR, addr);
+ bus->write(bus, phy_addr, MII_ATH_MMD_DATA, reg);
+ bus->write(bus, phy_addr, MII_ATH_MMD_ADDR, addr | 0x4000);
+}
+
void
-ar8xxx_phy_mmd_write(struct ar8xxx_priv *priv, int phy_addr, u16 addr, u16 data)
+ar8xxx_phy_mmd_write(struct ar8xxx_priv *priv, int phy_addr, u16 addr, u16 reg, u16 data)
{
struct mii_bus *bus = priv->mii_bus;
mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_addr, MII_ATH_MMD_ADDR, addr);
+ ar8xxx_phy_mmd_prep(bus, phy_addr, addr, reg);
bus->write(bus, phy_addr, MII_ATH_MMD_DATA, data);
mutex_unlock(&bus->mdio_lock);
}
u16
-ar8xxx_phy_mmd_read(struct ar8xxx_priv *priv, int phy_addr, u16 addr)
+ar8xxx_phy_mmd_read(struct ar8xxx_priv *priv, int phy_addr, u16 addr, u16 reg)
{
struct mii_bus *bus = priv->mii_bus;
u16 data;
mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_addr, MII_ATH_MMD_ADDR, addr);
+ ar8xxx_phy_mmd_prep(bus, phy_addr, addr, reg);
data = bus->read(bus, phy_addr, MII_ATH_MMD_DATA);
mutex_unlock(&bus->mdio_lock);
return 0;
usleep_range(1000, 2000);
+ cond_resched();
}
return -ETIMEDOUT;
mib_stats[i] = 0;
else
mib_stats[i] += t;
+ cond_resched();
}
}
if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
return;
- port = buf[0] & 0xf;
+ port = buf[0] & 0x7;
/* no need to fix up packets coming from a tagged source */
if (priv->vlan_tagged & (1 << port))
break;
udelay(10);
+ cond_resched();
}
pr_err("ar8216: timeout on reg %08x: %08x & %08x != %08x\n",
{
int timeout = 20;
- while (ar8xxx_mii_read32(priv, r2, r1) & AR8216_ATU_ACTIVE && --timeout)
- udelay(10);
+ while (ar8xxx_mii_read32(priv, r2, r1) & AR8216_ATU_ACTIVE && --timeout) {
+ udelay(10);
+ cond_resched();
+ }
if (!timeout)
pr_err("ar8216: timeout waiting for atu to become ready\n");
/* make sure no invalid PVIDs get set */
- if (vlan >= dev->vlans)
+ if (vlan < 0 || vlan >= dev->vlans ||
+ port < 0 || port >= AR8X16_MAX_PORTS)
return -EINVAL;
priv->pvid[port] = vlan;
ar8xxx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+
+ if (port < 0 || port >= AR8X16_MAX_PORTS)
+ return -EINVAL;
+
*vlan = priv->pvid[port];
return 0;
}
struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+
+ if (val->port_vlan >= AR8X16_MAX_VLANS)
+ return -EINVAL;
+
priv->vlan_id[val->port_vlan] = val->value.i;
return 0;
}
ar8xxx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
{
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
- u8 ports = priv->vlan_table[val->port_vlan];
+ u8 ports;
int i;
+ if (val->port_vlan >= AR8X16_MAX_VLANS)
+ return -EINVAL;
+
+ ports = priv->vlan_table[val->port_vlan];
val->len = 0;
for (i = 0; i < dev->ports; i++) {
struct switch_port *p;
priv->arl_age_time = AR8XXX_DEFAULT_ARL_AGE_TIME;
chip->init_globals(priv);
+ chip->atu_flush(priv);
mutex_unlock(&priv->reg_mutex);
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
const struct ar8xxx_chip *chip = priv->chip;
u64 *mib_stats, mib_data;
- int port;
+ unsigned int port;
int ret;
char *buf = priv->buf;
char buf1[64];
.apply_config = ar8xxx_sw_hw_apply,
.reset_switch = ar8xxx_sw_reset_switch,
.get_port_link = ar8xxx_sw_get_port_link,
+/* The following op is disabled as it hogs the CPU and degrades performance.
+ An implementation has been attempted in 4d8a66d but reading MIB data is slow
+ on ar8xxx switches.
+
+ The high CPU load has been traced down to the ar8xxx_reg_wait() call in
+ ar8xxx_mib_op(), which has to usleep_range() till the MIB busy flag set by
+ the request to update the MIB counter is cleared. */
+#if 0
+ .get_port_stats = ar8xxx_sw_get_port_stats,
+#endif
};
static const struct ar8xxx_chip ar8216_chip = {
if (!ar8xxx_has_mib_counters(priv))
return;
- cancel_delayed_work(&priv->mib_work);
+ cancel_delayed_work_sync(&priv->mib_work);
}
static struct ar8xxx_priv *
priv->phy = phydev;
- if (phydev->addr != 0) {
+ if (phydev->mdio.addr != 0) {
if (chip_is_ar8316(priv)) {
/* switch device has been initialized, reinit */
priv->dev.ports = (AR8216_NUM_PORTS - 1);
/* flush ARL entries for this port if it went down*/
if (!link_new)
priv->chip->atu_flush_port(priv, i);
- dev_info(&priv->phy->dev, "Port %d is %s\n",
+ dev_info(&priv->phy->mdio.dev, "Port %d is %s\n",
i, link_new ? "up" : "down");
}
if (phydev->state == PHY_CHANGELINK)
ar8xxx_check_link_states(priv);
- if (phydev->addr != 0)
+ if (phydev->mdio.addr != 0)
return genphy_read_status(phydev);
- ar8216_read_port_link(priv, phydev->addr, &link);
+ ar8216_read_port_link(priv, phydev->mdio.addr, &link);
phydev->link = !!link.link;
if (!phydev->link)
return 0;
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
- phydev->adjust_link(phydev->attached_dev);
+ if (phydev->adjust_link)
+ phydev->adjust_link(phydev->attached_dev);
return 0;
}
static int
ar8xxx_phy_config_aneg(struct phy_device *phydev)
{
- if (phydev->addr == 0)
+ if (phydev->mdio.addr == 0)
return 0;
return genphy_config_aneg(phydev);
static bool
ar8xxx_is_possible(struct mii_bus *bus)
{
- unsigned i;
+ unsigned int i, found_phys = 0;
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < 5; i++) {
u32 phy_id;
phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16;
phy_id |= mdiobus_read(bus, i, MII_PHYSID2);
- if (!ar8xxx_phy_match(phy_id)) {
+ if (ar8xxx_phy_match(phy_id)) {
+ found_phys++;
+ } else if (phy_id) {
pr_debug("ar8xxx: unknown PHY at %s:%02x id:%08x\n",
dev_name(&bus->dev), i, phy_id);
- return false;
}
}
-
- return true;
+ return !!found_phys;
}
static int
int ret;
/* skip PHYs at unused adresses */
- if (phydev->addr != 0 && phydev->addr != 4)
+ if (phydev->mdio.addr != 0 && phydev->mdio.addr != 4)
return -ENODEV;
- if (!ar8xxx_is_possible(phydev->bus))
+ if (!ar8xxx_is_possible(phydev->mdio.bus))
return -ENODEV;
mutex_lock(&ar8xxx_dev_list_lock);
list_for_each_entry(priv, &ar8xxx_dev_list, list)
- if (priv->mii_bus == phydev->bus)
+ if (priv->mii_bus == phydev->mdio.bus)
goto found;
priv = ar8xxx_create();
goto unlock;
}
- priv->mii_bus = phydev->bus;
+ priv->mii_bus = phydev->mdio.bus;
ret = ar8xxx_probe_switch(priv);
if (ret)
swdev->devname, swdev->name, priv->chip_rev,
dev_name(&priv->mii_bus->dev));
+ list_add(&priv->list, &ar8xxx_dev_list);
+
found:
priv->use_count++;
- if (phydev->addr == 0) {
+ if (phydev->mdio.addr == 0) {
if (ar8xxx_has_gige(priv)) {
phydev->supported = SUPPORTED_1000baseT_Full;
phydev->advertising = ADVERTISED_1000baseT_Full;
phydev->priv = priv;
- list_add(&priv->list, &ar8xxx_dev_list);
-
mutex_unlock(&ar8xxx_dev_list_lock);
return 0;
return;
phydev->priv = NULL;
- if (--priv->use_count > 0)
- return;
mutex_lock(&ar8xxx_dev_list_lock);
+
+ if (--priv->use_count > 0) {
+ mutex_unlock(&ar8xxx_dev_list_lock);
+ return;
+ }
+
list_del(&priv->list);
mutex_unlock(&ar8xxx_dev_list_lock);
ar8xxx_free(priv);
}
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)
static int
ar8xxx_phy_soft_reset(struct phy_device *phydev)
{
/* we don't need an extra reset */
return 0;
}
-#endif
-static struct phy_driver ar8xxx_phy_driver = {
- .phy_id = 0x004d0000,
- .name = "Atheros AR8216/AR8236/AR8316",
- .phy_id_mask = 0xffff0000,
- .features = PHY_BASIC_FEATURES,
- .probe = ar8xxx_phy_probe,
- .remove = ar8xxx_phy_remove,
- .detach = ar8xxx_phy_detach,
- .config_init = ar8xxx_phy_config_init,
- .config_aneg = ar8xxx_phy_config_aneg,
- .read_status = ar8xxx_phy_read_status,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)
- .soft_reset = ar8xxx_phy_soft_reset,
-#endif
- .driver = { .owner = THIS_MODULE },
+static struct phy_driver ar8xxx_phy_driver[] = {
+ {
+ .phy_id = 0x004d0000,
+ .name = "Atheros AR8216/AR8236/AR8316",
+ .phy_id_mask = 0xffff0000,
+ .features = PHY_BASIC_FEATURES,
+ .probe = ar8xxx_phy_probe,
+ .remove = ar8xxx_phy_remove,
+ .detach = ar8xxx_phy_detach,
+ .config_init = ar8xxx_phy_config_init,
+ .config_aneg = ar8xxx_phy_config_aneg,
+ .read_status = ar8xxx_phy_read_status,
+ .soft_reset = ar8xxx_phy_soft_reset,
+ }
};
-int __init
-ar8xxx_init(void)
-{
- return phy_driver_register(&ar8xxx_phy_driver);
-}
-
-void __exit
-ar8xxx_exit(void)
-{
- phy_driver_unregister(&ar8xxx_phy_driver);
-}
-
-module_init(ar8xxx_init);
-module_exit(ar8xxx_exit);
+module_phy_driver(ar8xxx_phy_driver);
MODULE_LICENSE("GPL");
-
projects / openwrt / openwrt.git / blobdiff