imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxi

[openwrt/openwrt.git] / target / linux / imx6 / image / Makefile

diff --git a/target/linux/imx6/image/Makefile b/target/linux/imx6/image/Makefile
index 540692d817377e0bfd391fb9b41a46bfc0dbd25d..f13412f1e3002f41053419a7952c77b20d0940c6 100644 (file)
--- a/target/linux/imx6/image/Makefile
+++ b/target/linux/imx6/image/Makefile
@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/image.mk
 # Images
 #################################################
 
-DEVICE_VARS += MKUBIFS_OPTS
+DEVICE_VARS += MKUBIFS_OPTS UBOOT BOOT_SCRIPT
 
 define Build/boot-overlay
        rm -rf $@.boot
@@ -58,6 +58,38 @@ define Build/boot-scr
        $(BIN_DIR)/boot.scr
 endef
 
+define Build/imx6-sdcard
+       rm -rf $@.boot
+       mkdir -p $@.boot
+
+       $(CP) $(STAGING_DIR_IMAGE)/$(UBOOT)-u-boot.img $@.boot/u-boot.img
+       $(CP) $(IMAGE_KERNEL) $@.boot/uImage
+
+       $(foreach dts,$(DEVICE_DTS), \
+               $(CP) \
+                       $(DTS_DIR)/$(dts).dtb \
+                       $@.boot/;
+       )
+
+       mkimage -A arm -O linux -T script -C none -a 0 -e 0 \
+               -n '$(DEVICE_ID) OpenWrt bootscript' \
+               -d $(BOOT_SCRIPT) \
+               $@.boot/boot.scr
+
+       cp $@ $@.fs
+
+       $(SCRIPT_DIR)/gen_image_generic.sh $@ \
+               $(CONFIG_TARGET_KERNEL_PARTSIZE) \
+               $@.boot \
+               $(CONFIG_TARGET_ROOTFS_PARTSIZE) \
+               $@.fs \
+               1024
+
+       dd if=$(STAGING_DIR_IMAGE)/$(UBOOT)-SPL of=$@ bs=1024 seek=1 conv=notrunc
+
+       rm -rf $@.boot $@.fs
+endef
+
 #################################################
 # Devices
 #################################################
@@ -72,7 +104,6 @@ define Device/Default
   KERNEL_NAME := zImage
   KERNEL_PREFIX := $$(IMAGE_PREFIX)
   KERNEL := kernel-bin | uImage none
-  IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
   IMAGES :=
 endef
 
@@ -103,6 +134,7 @@ define Device/ventana
        kobs-ng
   KERNEL += | boot-overlay
   IMAGES := nand.ubi bootfs.tar.gz
+  IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
   UBINIZE_PARTS = boot=$$(KDIR_KERNEL_IMAGE).boot.ubifs=15
   IMAGE/nand.ubi := append-ubi
   IMAGE/bootfs.tar.gz := bootfs.tar.gz | install-dtb
@@ -131,11 +163,16 @@ endef
 TARGET_DEVICES += wandboard
 
 define Device/cubox-i
-  KERNEL := kernel-bin | install-dtb | boot-scr
+  KERNEL := kernel-bin | install-dtb
+  UBOOT := mx6cuboxi
+  BOOT_SCRIPT = bootscript-cubox
   DEVICE_NAME := cubox
   DEVICE_TITLE := SolidRun CuBox-i
-  DEVICE_PACKAGES := u-boot-mx6cuboxi kmod-drm-imx kmod-drm-imx-hdmi kmod-usb-hid
-  DEVICE_DTS := imx6q-cubox-i imx6dl-cubox-i
+  DEVICE_PACKAGES := kmod-drm-imx kmod-drm-imx-hdmi kmod-usb-hid
+  DEVICE_DTS := imx6q-cubox-i imx6dl-cubox-i imx6q-hummingboard imx6dl-hummingboard
+  IMAGES := combined.bin
+  FILESYSTEMS := squashfs
+  IMAGE/combined.bin := append-rootfs | pad-extra 128k | imx6-sdcard
 endef
 TARGET_DEVICES += cubox-i