#!/bin/sh
-# xor multiple hex values of the same length
-xor() {
- local val
- local ret="0x$1"
- local retlen=${#1}
-
- shift
- while [ -n "$1" ]; do
- val="0x$1"
- ret=$((ret ^ val))
- shift
- done
-
- printf "%0${retlen}x" "$ret"
-}
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_ubi_extract() {
- local part=$1
- local offset=$2
- local count=$3
- local ubidev
- local ubi
-
- . /lib/upgrade/nand.sh
-
- ubidev=$(nand_find_ubi $CI_UBIPART)
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath10kcal_die "no UBI volume found for $part"
-
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract from $ubi"
-}
-
-ath10kcal_patch_mac_crc() {
- local mac=$1
- local mac_offset=6
- local chksum_offset=2
- local xor_mac
- local xor_fw_mac
- local xor_fw_chksum
-
- [ -z "$mac" ] && return
-
- xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
- xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
-
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-
- xor_mac=${mac//:/}
- xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
-
- xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
- xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
-
- printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
- dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
-}
-
-ath10kcal_is_caldata_valid() {
- local expected="$1"
-
- magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE)
- [[ "$magic" == "$expected" ]]
- return $?
-}
-
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
board=$(board_name)
-
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
meraki,mr33)
- ath10kcal_ubi_extract "ART" 36864 2116
- ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
- ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
+ caldata_extract_ubi "ART" 0x9000 0x844
+ caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
+ ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 36864 12064
+ caldata_extract_ubi "Factory" 0x9000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ linksys,ea8300)
+ caldata_extract "ART" 0x9000 0x2f20
+ # OEM assigns 4 sequential MACs
+ ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+ ;;
openmesh,a62)
- ath10kcal_extract "0:ART" 36864 12064
+ caldata_extract "0:ART" 0x9000 0x2f20
;;
esac
;;
case "$board" in
8dev,jalapeno |\
alfa-network,ap120c-ac |\
+ cilab,meshpoint-one |\
glinet,gl-b1300 |\
linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 4096 12064
+ caldata_extract "ART" 0x1000 0x2f20
+ ;;
+ aruba,ap-303)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
;;
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 4096 12064
+ caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- ath10kcal_ubi_extract "Factory" 4096 12064
+ caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-1200 |\
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ compex,wpj419 |\
compex,wpj428 |\
engenius,eap1300 |\
openmesh,a42 |\
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
- qxwlan,e2600ac-c2)
- ath10kcal_extract "0:ART" 4096 12064
+ qxwlan,e2600ac-c2 |\
+ unielec,u4019-32m)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ;;
+ engenius,ens620ext)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+ ;;
+ linksys,ea8300)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
meraki,mr33)
- ath10kcal_ubi_extract "ART" 4096 12064
- ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
- ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2)
+ caldata_extract_ubi "ART" 0x1000 0x2f20
+ caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ath10kcal_extract "ART" 4096 12064
- ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
- ath10kcal_extract "ART" 4096 12064
- ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+ caldata_extract "ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
esac
;;
case "$board" in
8dev,jalapeno |\
alfa-network,ap120c-ac |\
+ cilab,meshpoint-one |\
glinet,gl-b1300 |\
linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 20480 12064
+ caldata_extract "ART" 0x5000 0x2f20
+ ;;
+ aruba,ap-303)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
;;
asus,map-ac2200)
- ath10kcal_ubi_extract "Factory" 20480 12064
+ caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- ath10kcal_ubi_extract "Factory" 20480 12064
+ caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-1200 |\
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ compex,wpj419 |\
compex,wpj428 |\
engenius,eap1300 |\
openmesh,a42 |\
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
- qxwlan,e2600ac-c2)
- ath10kcal_extract "0:ART" 20480 12064
+ qxwlan,e2600ac-c2 |\
+ unielec,u4019-32m)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ;;
+ engenius,ens620ext)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+ ;;
+ linksys,ea8300)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
;;
meraki,mr33)
- ath10kcal_ubi_extract "ART" 20480 12064
- ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
- ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3)
+ caldata_extract_ubi "ART" 0x5000 0x2f20
+ caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
- ath10kcal_extract "ART" 20480 12064
- ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
- ath10kcal_extract "ART" 20480 12064
- ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+ caldata_extract "ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
esac
;;
projects / openwrt / openwrt.git / blobdiff