ipq40xx: Use detailed reserved memory for A42
[openwrt/openwrt.git] / target / linux / ipq40xx / files-4.14 / arch / arm / boot / dts / qcom-ipq4018-a42.dts
index 772465c..d365a7e 100644 (file)
                #size-cells = <0x1>;
                ranges;
 
-               rsvd1@87000000 {
-                       reg = <0x87000000 0x500000>;
+               tz_apps@87b80000 {
+                       reg = <0x87b80000 0x280000>;
                        no-map;
                };
 
-               wifi_dump@87500000 {
-                       reg = <0x87500000 0x600000>;
+               smem@87e00000 {
+                       reg = <0x87e00000 0x080000>;
                        no-map;
                };
 
-               rsvd2@87B00000 {
-                       reg = <0x87b00000 0x500000>;
+               tz@87e80000 {
+                       reg = <0x87e80000 0x180000>;
                        no-map;
                };
        };
@@ -60,7 +60,7 @@
                        compatible = "qcom,tcsr";
                        reg = <0x194b000 0x100>;
                        qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-                       status = "ok";
+                       status = "okay";
                };
 
                tcsr@1949000 {
                };
 
                usb2: usb2@60f8800 {
-                       status = "ok";
+                       status = "okay";
                };
 
                serial@78af000 {
                        pinctrl-0 = <&serial_pins>;
                        pinctrl-names = "default";
-                       status = "ok";
+                       status = "okay";
                };
 
                crypto@8e3a000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                watchdog@b017000 {
-                       status = "ok";
+                       status = "okay";
                };
 
                ess-switch@c000000 {
 };
 
 &blsp_dma {
-       status = "ok";
+       status = "okay";
 };
 
 &spi_0 {
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
-       status = "ok";
-       cs-gpios = <&tlmm 54 0>;
+       status = "okay";
+       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
        m25p80@0 {
                #address-cells = <1>;
 };
 
 &cryptobam {
-       status = "ok";
+       status = "okay";
 };
 
 &gmac0 {
 };
 
 &usb2_hs_phy {
-       status = "ok";
+       status = "okay";
 };
 
 &wifi0 {