ipq806x: add support for Compex WPQ864

[openwrt/openwrt.git] / target / linux / ipq806x / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index a461033dfe6961e7dae69b2e40b3666247c3c805..9d8af44855527dc40fb93d8d9a316ca068b8b190 100755 (executable)
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -5,42 +5,45 @@
 #
 
 . /lib/functions/uci-defaults.sh
-. /lib/ipq806x.sh
 . /lib/functions/system.sh
 
 board_config_update
 
-board=$(ipq806x_board_name)
+board=$(board_name)
 
 case "$board" in
-ap148 |\
-c2600 |\
-d7800 |\
-r7500 |\
-r7500v2 |\
-r7800)
+compex,wpq864 |\
+netgear,d7800 |\
+netgear,r7500 |\
+netgear,r7500v2 |\
+netgear,r7800 |\
+qcom,ipq8064-ap148 |\
+tplink,vr2600v)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
        ;;
-db149)
-       ucidef_set_interface_lan "eth1 eth2 eth3"
-       ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
-       ;;
-ea8500)
-
+linksys,ea8500)
        hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
        ucidef_add_switch "switch0" \
-               "1:lan" "2:lan" "3:lan" "4:lan" "0t@eth0" "5:wan" "0t@eth0"
+               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
        ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
        ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
        ;;
-nbg6817)
+qcom,ipq8064-db149)
+       ucidef_set_interface_lan "eth1 eth2 eth3"
+       ucidef_add_switch "switch0" \
+               "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
+       ;;
+tplink,c2600)
+       ucidef_add_switch "switch0" \
+               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
+       ;;
+zyxel,nbg6817)
        hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
-       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-       ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 1)"
+       ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
+       ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
        ;;
 *)
        echo "Unsupported hardware. Network interfaces not intialized"