ipq806x: add support for GL.iNet GL-B1300

[openwrt/openwrt.git] / target / linux / ipq806x / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 24da5500b551d25c3bb809764195bb12f925a0be..fa8eb1185764dacda128d88b3810ca79722adc35 100644 (file)
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -38,35 +38,85 @@ ath10kcal_patch_mac() {
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/ipq806x.sh
 . /lib/functions.sh
 . /lib/functions/system.sh
 
-board=$(ipq806x_board_name)
+board=$(board_name)
 
 
 case "$FIRMWARE" in
-"ath10k/cal-pci-0000:01:00.0.bin")
+"ath10k/pre-cal-ahb-a000000.wifi.bin")
+       case "$board" in
+       avm,fritzbox-4040)
+               /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+               ;;
+       openmesh,a42)
+               ath10kcal_extract "0:ART" 4096 12064
+               ;;
+       glinet,gl-b1300 |\
+       qcom,ap-dk01.1-c1)
+               ath10kcal_extract "ART" 4096 12064
+               ;;
+       esac
+       ;;
+"ath10k/pre-cal-ahb-a800000.wifi.bin")
+       case "$board" in
+       avm,fritzbox-4040)
+               /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+               ;;
+       openmesh,a42)
+               ath10kcal_extract "0:ART" 20480 12064
+               ;;
+       glinet,gl-b1300 |\
+       qcom,ap-dk01.1-c1)
+               ath10kcal_extract "ART" 20480 12064
+               ;;
+       esac
+       ;;
+
+"ath10k/pre-cal-pci-0000:01:00.0.bin")
        case $board in
-       c2600)
+       linksys,ea8500)
+               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               ath10kcal_extract "art" 4096 12064
+               ;;
+       netgear,d7800 |\
+       netgear,r7500v2 |\
+       netgear,r7800)
+               ath10kcal_extract "art" 4096 12064
+               ;;
+       tplink,c2600)
                ath10kcal_extract "radio" 4096 12064
 #              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
                ;;
-       ea8500)
-               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-               ath10kcal_extract "art" 4096 12064
+       tplink,vr2600v)
+               ath10kcal_extract "ART" 4096 12064
+               ;;
+       zyxel,nbg6817)
+               ath10kcal_extract "0:ART" 4096 12064
                ;;
        esac
        ;;
-"ath10k/cal-pci-0001:01:00.0.bin")
+"ath10k/pre-cal-pci-0001:01:00.0.bin")
        case $board in
-       c2600)
+       linksys,ea8500)
+               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               ath10kcal_extract "art" 20480 12064
+               ;;
+       netgear,d7800 |\
+       netgear,r7500v2 |\
+       netgear,r7800)
+               ath10kcal_extract "art" 20480 12064
+               ;;
+       tplink,c2600)
                ath10kcal_extract "radio" 20480 12064
 #              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
                ;;
-       ea8500)
-               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-               ath10kcal_extract "art" 20480 12064
+       tplink,vr2600v)
+               ath10kcal_extract "ART" 20480 12064
+               ;;
+       zyxel,nbg6817)
+               ath10kcal_extract "0:ART" 20480 12064
                ;;
        esac
        ;;