include $(INCLUDE_DIR)/image.mk
UBIFS_OPTS = -m 2048 -e 124KiB -c 4096 -U -F
-UBINIZE_OPTS = -m 2048 -p 128KiB
-
-E2SIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024)))
-
-define Image/BuildKernel/FIT
- gzip -9 -c $(KDIR)/Image > $(KDIR)/Image.gz
- $(call CompressLzma,$(KDIR)/Image,$(KDIR)/Image.gz)
- $(call Image/BuildKernel/MkFIT,$(1), $(KDIR)/Image.gz, $(LINUX_DIR)/arch/arm/boot/dts/$(1).dtb,gzip,0x42208000,0x42208000)
- $(CP) $(KDIR)/fit-$(1).itb $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage.itb
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/BuildKernel/MkFIT,$(1), $(KDIR)/Image-initramfs, $(LINUX_DIR)/arch/arm/boot/dts/$(1).dtb, none,0x42208000,0x42208000)
- $(CP) $(KDIR)/fit-$(1).itb $(BIN_DIR)/$(IMG_PREFIX)-$(1)-fit-uImage-initramfs.itb
-endif
-endef
define Image/Prepare
$(CP) $(LINUX_DIR)/vmlinux $(KDIR)/$(IMG_PREFIX)-vmlinux.elf
define Image/BuildKernel
$(CP) $(KDIR)/$(IMG_PREFIX)-vmlinux.elf $(BIN_DIR)
- $(call Image/BuildKernel/FIT,qcom-ipq8064-ap148)
- $(call Image/BuildKernel/FIT,qcom-ipq8064-db149)
endef
define Image/Build/squashfs
+ cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
endef
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1)-root.img bs=2k conv=sync
endef
+define Device/Default
+ PROFILES := Default
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
+ KERNEL_PREFIX := $$(IMAGE_PREFIX)
+ KERNEL_LOADADDR = 0x42208000
+ SUPPORTED_DEVICES = $$(BOARD_NAME)
+ IMAGE/sysupgrade.tar = sysupgrade-tar | append-metadata
+endef
+
+define Device/LegacyImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+endef
+
+define Device/FitImage
+ KERNEL_SUFFIX := -fit-uImage.itb
+ KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_NAME := Image
+endef
+
+define Device/FitImageLzma
+ KERNEL_SUFFIX := -fit-uImage.itb
+ KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_NAME := Image
+endef
+
+define Device/UbiFit
+ KERNEL_IN_UBI := 1
+ IMAGES := nand-factory.ubi nand-sysupgrade.tar
+ IMAGE/nand-factory.ubi := append-ubi
+ IMAGE/nand-sysupgrade.tar := sysupgrade-tar | append-metadata
+endef
+
+define Device/DniImage
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ NETGEAR_BOARD_ID :=
+ NETGEAR_HW_ID :=
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.img sysupgrade.tar
+ IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
+ IMAGE/sysupgrade.tar := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
+endef
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+
+define Device/TpSafeImage
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ TPLINK_BOARD_ID :=
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
+endef
+DEVICE_VARS += TPLINK_BOARD_ID
+
+define Device/ZyXELImage
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
+ KERNEL_NAME := zImage
+ IMAGES := sysupgrade.tar mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
+ IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE}
+ IMAGE/mmcblk0p4-kernel.bin := append-kernel
+endef
+
+define Device/AP148
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ DEVICE_TITLE := Qualcomm AP148
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+
+define Device/AP148-legacy
+ $(call Device/LegacyImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ DEVICE_TITLE := Qualcomm AP148 (legacy)
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+
+define Device/C2600
+ $(call Device/TpSafeImage)
+ DEVICE_DTS := qcom-ipq8064-c2600
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := c2600
+ TPLINK_BOARD_ID := C2600
+ DEVICE_TITLE := TP-Link Archer C2600
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+
+define Device/D7800
+ $(call Device/DniImage)
+ DEVICE_DTS := qcom-ipq8064-d7800
+ KERNEL_SIZE := 2097152
+ NETGEAR_BOARD_ID := D7800
+ NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := d7800
+ DEVICE_TITLE := Netgear Nighthawk X4 D7800
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+
+define Device/DB149
+ $(call Device/FitImage)
+ DEVICE_DTS := qcom-ipq8064-db149
+ KERNEL_INSTALL := 1
+ BOARD_NAME := db149
+ DEVICE_TITLE := Qualcomm DB149
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+
+define Device/EA8500
+ $(call Device/LegacyImage)
+ DEVICE_DTS := qcom-ipq8064-ea8500
+ PAGESIZE := 2048
+ BLOCKSIZE := 128k
+ KERNEL_SIZE := 3072k
+ FILESYSTEMS := squashfs
+ KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
+ PROFILES += $$(DEVICE_NAME)
+ BOARD_NAME := ea8500
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.bin sysupgrade.tar
+ IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
+ DEVICE_TITLE := Linksys EA8500
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+
+define Device/FRITZ4040
+ $(call Device/FitImageLzma)
+ DEVICE_DTS := qcom-ipq4019-fritz4040
+ KERNEL_LOADADDR := 0x80208000
+ BLOCKSIZE := 4k
+ PAGESIZE := 256
+ BOARD_NAME := fritz4040
+ DEVICE_TITLE := AVM Fritz!Box 4040
+ IMAGE_SIZE := 29753344
+ IMAGES = sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
+endef
+
+define Device/R7500
+ $(call Device/DniImage)
+ DEVICE_DTS := qcom-ipq8064-r7500
+ KERNEL_SIZE := 2097152
+ NETGEAR_BOARD_ID := R7500
+ NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7500
+ DEVICE_TITLE := Netgear Nighthawk X4 R7500
+ DEVICE_PACKAGES := ath10k-firmware-qca988x
+endef
+
+define Device/R7500v2
+ $(call Device/DniImage)
+ DEVICE_DTS := qcom-ipq8064-r7500v2
+ KERNEL_SIZE := 2097152
+ NETGEAR_BOARD_ID := R7500v2
+ NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7500v2
+ DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
+endef
+
+define Device/R7800
+ $(call Device/DniImage)
+ DEVICE_DTS := qcom-ipq8065-r7800
+ KERNEL_SIZE := 2097152
+ NETGEAR_BOARD_ID := R7800
+ NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7800
+ DEVICE_TITLE := Netgear Nighthawk X4S R7800
+ DEVICE_PACKAGES := ath10k-firmware-qca9984
+endef
+
+define Device/NBG6817
+ DEVICE_DTS := qcom-ipq8065-nbg6817
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 64k
+ BOARD_NAME := nbg6817
+ DEVICE_TITLE := ZyXEL NBG6817
+ DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs losetup
+ $(call Device/ZyXELImage)
+endef
+
+define Device/VR2600v
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SIZE := 2097152
+ DEVICE_DTS := qcom-ipq8064-vr2600v
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := vr2600v
+ DEVICE_TITLE := TP-Link Archer VR2600v
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+endef
+
+define Device/AP-DK04.1-C1
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
+ KERNEL_LOADADDR := 0x80208000
+ KERNEL_INSTALL := 1
+ KERNEL_SIZE := 4048k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap-dk04.1-c1
+ DEVICE_TITLE := QCA AP-DK04.1-C1
+endef
+
+TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
+ R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1
+
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff