include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-UBIFS_OPTS = -m 2048 -e 124KiB -c 4096 -U -F
-UBINIZE_OPTS = -m 2048 -p 128KiB
-
-KERNEL_LOADADDR := 0x42208000
-
-define Image/Prepare
- $(CP) $(LINUX_DIR)/vmlinux $(KDIR)/$(IMG_PREFIX)-vmlinux.elf
- mkimage -A arm -O linux -T filesystem -C none \
- -a $(KERNEL_LOADADDR) -e $(KERNEL_LOADADDR) \
- -n 'ARM OpenWrt fakeroot' \
- -s $(KDIR_TMP)/root.dummy-uImage.tmp
- echo -ne '\xff' > $(KDIR_TMP)/root.dummy
- cat $(KDIR_TMP)/root.dummy $(KDIR_TMP)/root.dummy-uImage.tmp > $(KDIR)/root.dummy
-endef
-
-define Image/BuildKernel
- $(CP) $(KDIR)/$(IMG_PREFIX)-vmlinux.elf $(BIN_DIR)
-endef
-
-define Image/Build/squashfs
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1)-root.img bs=2k conv=sync
-endef
-
-define Build/append-dtb
- cat $(DTS_DIR)/$(DEVICE_DTS).dtb >> $@
-endef
-
-define Build/append-file
- cat $(1) >> $@
-endef
-
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
- DEVICE_DTS :=
KERNEL_PREFIX := $$(IMAGE_PREFIX)
- IMAGES :=
- KERNEL_IN_UBI :=
- BOARD_NAME :=
+ KERNEL_LOADADDR = 0x42208000
+ SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+ IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
+ IMAGE/sysupgrade.bin/squashfs :=
endef
-DEVICE_VARS += DEVICE_DTS KERNEL_IN_UBI BOARD_NAME
define Device/LegacyImage
KERNEL_SUFFIX := -uImage
KERNEL_NAME := Image
endef
+define Device/FitImageLzma
+ KERNEL_SUFFIX := -fit-uImage.itb
+ KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL_NAME := Image
+endef
+
define Device/UbiFit
KERNEL_IN_UBI := 1
- IMAGES := nand-factory.ubi nand-sysupgrade.tar
+ IMAGES := nand-factory.ubi nand-sysupgrade.bin
IMAGE/nand-factory.ubi := append-ubi
- IMAGE/nand-sysupgrade.tar := sysupgrade-nand
+ IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/DniImage
- PROFILES += $$(DEVICE_NAME)
- FILESYSTEMS := squashfs
KERNEL_SUFFIX := -uImage
- KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
- KERNEL = kernel-bin | append-dtb | pad-to $$$$(($$(KERNEL_SIZE)-2*64-1)) | uImage none | append-file $(KDIR)/root.dummy
+ KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
- IMAGES := factory.img sysupgrade.tar
- IMAGE/factory.img := append-kernel | append-ubi | netgear-dni
- IMAGE/sysupgrade.tar = sysupgrade-nand
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.img sysupgrade.bin
+ IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
endef
-DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID DEVICE_BLOCK_SIZE DEVICE_PAGE_SIZE
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
define Device/TpSafeImage
- PROFILES += $$(DEVICE_NAME)
- FILESYSTEMS := squashfs
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
- TPLINK_BOARD_NAME :=
+ TPLINK_BOARD_ID :=
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
endef
-DEVICE_VARS += TPLINK_BOARD_NAME
+DEVICE_VARS += TPLINK_BOARD_ID
-define Device/AP148
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128KiB
- PAGESIZE := 2048
- BOARD_NAME := ap148
- DEVICE_TITLE := Qualcom AP148
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
+define Device/ZyXELImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
+ KERNEL_NAME := zImage
+ IMAGES := sysupgrade.bin mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE}
+ IMAGE/mmcblk0p4-kernel.bin := append-kernel
endef
-define Device/AP148-legacy
- $(call Device/LegacyImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128KiB
- PAGESIZE := 2048
- BOARD_NAME := ap148
- DEVICE_TITLE := Qualcom AP148 (legacy)
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
+define Device/avm_fritzbox-4040
+ $(call Device/FitImageLzma)
+ DEVICE_DTS := qcom-ipq4019-fritz4040
+ KERNEL_LOADADDR := 0x80208000
+ BLOCKSIZE := 4k
+ PAGESIZE := 256
+ BOARD_NAME := fritz4040
+ DEVICE_TITLE := AVM Fritz!Box 4040
+ IMAGE_SIZE := 29753344
+ IMAGES = sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040
endef
+TARGET_DEVICES += avm_fritzbox-4040
-define Device/C2600
- $(call Device/TpSafeImage)
- DEVICE_DTS := qcom-ipq8064-c2600
- BLOCKSIZE := 128KiB
+define Device/linksys_ea8500
+ $(call Device/LegacyImage)
+ DEVICE_DTS := qcom-ipq8064-ea8500
PAGESIZE := 2048
- BOARD_NAME := c2600
- TPLINK_BOARD_NAME := C2600
- DEVICE_TITLE := TP-Link Archer C2600
+ BLOCKSIZE := 128k
+ KERNEL_SIZE := 3072k
+ KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
+ BOARD_NAME := ea8500
+ SUPPORTED_DEVICES += ea8500
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
+ DEVICE_TITLE := Linksys EA8500
DEVICE_PACKAGES := ath10k-firmware-qca99x0
endef
+TARGET_DEVICES += linksys_ea8500
-define Device/D7800
+define Device/netgear_d7800
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-d7800
KERNEL_SIZE := 2097152
NETGEAR_BOARD_ID := D7800
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := d7800
+ SUPPORTED_DEVICES += d7800
DEVICE_TITLE := Netgear Nighthawk X4 D7800
DEVICE_PACKAGES := ath10k-firmware-qca99x0
endef
+TARGET_DEVICES += netgear_d7800
-define Device/DB149
- $(call Device/FitImage)
- DEVICE_DTS := qcom-ipq8064-db149
- KERNEL_INSTALL := 1
- BOARD_NAME := db149
- DEVICE_TITLE := Qualcom DB149
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-
-define Device/EA8500
- $(call Device/LegacyImage)
- DEVICE_DTS := qcom-ipq8064-ea8500
- PAGESIZE := 2048
- BLOCKSIZE := 128KiB
- KERNEL_SIZE := 3145728
- FILESYSTEMS := squashfs
- KERNEL = kernel-bin | append-dtb | uImage none | append-file $(KDIR)/root.dummy
- PROFILES += $$(DEVICE_NAME)
- BOARD_NAME := ea8500
- IMAGES := factory.bin sysupgrade.tar
- IMAGE/factory.bin := append-kernel 3145728 | append-ubi
- IMAGE/sysupgrade.tar := sysupgrade-nand
- DEVICE_VARS += DEVICE_DTS KERNEL_SIZE PAGESIZE BLOCKSIZE SUBPAGESIZE
- DEVICE_TITLE := Linksys EA8500
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-
-define Device/R7500
+define Device/netgear_r7500
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-r7500
KERNEL_SIZE := 2097152
NETGEAR_BOARD_ID := R7500
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7500
+ SUPPORTED_DEVICES += r7500
DEVICE_TITLE := Netgear Nighthawk X4 R7500
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
+ DEVICE_PACKAGES := ath10k-firmware-qca988x
endef
+TARGET_DEVICES += netgear_r7500
-define Device/R7800
+define Device/netgear_r7500v2
$(call Device/DniImage)
- DEVICE_DTS := qcom-ipq8064-r7800
+ DEVICE_DTS := qcom-ipq8064-r7500v2
+ KERNEL_SIZE := 2097152
+ NETGEAR_BOARD_ID := R7500v2
+ NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7500v2
+ SUPPORTED_DEVICES += r7500v2
+ DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
+endef
+TARGET_DEVICES += netgear_r7500v2
+
+define Device/netgear_r7800
+ $(call Device/DniImage)
+ DEVICE_DTS := qcom-ipq8065-r7800
KERNEL_SIZE := 2097152
NETGEAR_BOARD_ID := R7800
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
- BLOCKSIZE := 128KiB
+ BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7800
+ SUPPORTED_DEVICES += r7800
DEVICE_TITLE := Netgear Nighthawk X4S R7800
DEVICE_PACKAGES := ath10k-firmware-qca9984
endef
+TARGET_DEVICES += netgear_r7800
+
+define Device/openmesh_a42
+ $(call Device/FitImageLzma)
+ DEVICE_DTS := qcom-ipq4019-a42
+ KERNEL_LOADADDR := 0x80208000
+ BLOCKSIZE := 64k
+ SUPPORTED_DEVICES := openmesh,a42
+ DEVICE_TITLE := OpenMesh A42
+ KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+ IMAGE_SIZE := 15616k
+ IMAGES = factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools ipq-wifi-openmesh_a42
+endef
+TARGET_DEVICES += openmesh_a42
+
+define Device/qcom_ap-dk01.1-c1
+ DEVICE_TITLE := QCA AP-DK01.1-C1
+ BOARD_NAME := ap-dk01.1-c1
+ DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+ KERNEL_LOADADDR := 0x80208000
+ KERNEL_INSTALL := 1
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 26624k
+ $(call Device/FitImage)
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca4019
+endef
+TARGET_DEVICES += qcom_ap-dk01.1-c1
+
+define Device/qcom_ap-dk04.1-c1
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
+ KERNEL_LOADADDR := 0x80208000
+ KERNEL_INSTALL := 1
+ KERNEL_SIZE := 4048k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap-dk04.1-c1
+ DEVICE_TITLE := QCA AP-DK04.1-C1
+endef
+TARGET_DEVICES += qcom_ap-dk04.1-c1
+
+define Device/qcom_ipq8064-ap148
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES += ap148
+ DEVICE_TITLE := Qualcomm AP148
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+ $(call Device/LegacyImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+ DEVICE_TITLE := Qualcomm AP148 (legacy)
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 R7500 R7800
+define Device/qcom_ipq8064-db149
+ $(call Device/FitImage)
+ DEVICE_DTS := qcom-ipq8064-db149
+ KERNEL_INSTALL := 1
+ BOARD_NAME := db149
+ DEVICE_TITLE := Qualcomm DB149
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_c2600
+ $(call Device/TpSafeImage)
+ DEVICE_DTS := qcom-ipq8064-c2600
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := c2600
+ SUPPORTED_DEVICES += c2600
+ TPLINK_BOARD_ID := C2600
+ DEVICE_TITLE := TP-Link Archer C2600
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SIZE := 2097152
+ DEVICE_DTS := qcom-ipq8064-vr2600v
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := vr2600v
+ SUPPORTED_DEVICES += vr2600v
+ DEVICE_TITLE := TP-Link Archer VR2600v
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/zyxel_nbg6817
+ DEVICE_DTS := qcom-ipq8065-nbg6817
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 64k
+ BOARD_NAME := nbg6817
+ SUPPORTED_DEVICES += nbg6817
+ DEVICE_TITLE := ZyXEL NBG6817
+ DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
+ $(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff