UBIFS_OPTS = -m 2048 -e 124KiB -c 4096 -U -F
define Image/Prepare
- $(CP) $(LINUX_DIR)/vmlinux $(KDIR)/$(IMG_PREFIX)-vmlinux.elf
+ $(CP) $(LINUX_DIR)/vmlinux $(KDIR)/vmlinux-unstripped.elf
endef
define Image/BuildKernel
- $(CP) $(KDIR)/$(IMG_PREFIX)-vmlinux.elf $(BIN_DIR)
+ $(CP) $(KDIR)/vmlinux-unstripped.elf $(BIN_DIR)/$(IMG_PREFIX)-vmlinux.elf
endef
define Image/Build/squashfs
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
KERNEL_PREFIX := $$(IMAGE_PREFIX)
KERNEL_LOADADDR = 0x42208000
- SUPPORTED_DEVICES = $$(BOARD_NAME)
- IMAGE/sysupgrade.tar = sysupgrade-tar | append-metadata
+ SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+ IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
endef
define Device/LegacyImage
define Device/UbiFit
KERNEL_IN_UBI := 1
- IMAGES := nand-factory.ubi nand-sysupgrade.tar
+ IMAGES := nand-factory.ubi nand-sysupgrade.bin
IMAGE/nand-factory.ubi := append-ubi
- IMAGE/nand-sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/DniImage
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
UBINIZE_OPTS := -E 5
- IMAGES := factory.img sysupgrade.tar
+ IMAGES := factory.img sysupgrade.bin
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
- IMAGE/sysupgrade.tar := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
endef
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
KERNEL_NAME := zImage
- IMAGES := sysupgrade.tar mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
- IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGES := sysupgrade.bin mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE}
IMAGE/mmcblk0p4-kernel.bin := append-kernel
endef
-define Device/AP148
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- DEVICE_TITLE := Qualcomm AP148
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
+define Device/avm_fritzbox-4040
+ $(call Device/FitImageLzma)
+ DEVICE_DTS := qcom-ipq4019-fritz4040
+ KERNEL_LOADADDR := 0x80208000
+ BLOCKSIZE := 4k
+ PAGESIZE := 256
+ BOARD_NAME := fritz4040
+ DEVICE_TITLE := AVM Fritz!Box 4040
+ IMAGE_SIZE := 29753344
+ IMAGES = sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
endef
+TARGET_DEVICES += avm_fritzbox-4040
-define Device/AP148-legacy
+define Device/linksys_ea8500
$(call Device/LegacyImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128k
+ DEVICE_DTS := qcom-ipq8064-ea8500
PAGESIZE := 2048
- BOARD_NAME := ap148
- DEVICE_TITLE := Qualcomm AP148 (legacy)
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-
-define Device/C2600
- $(call Device/TpSafeImage)
- DEVICE_DTS := qcom-ipq8064-c2600
BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := c2600
- TPLINK_BOARD_ID := C2600
- DEVICE_TITLE := TP-Link Archer C2600
+ KERNEL_SIZE := 3072k
+ FILESYSTEMS := squashfs
+ KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
+ PROFILES += $$(DEVICE_NAME)
+ BOARD_NAME := ea8500
+ SUPPORTED_DEVICES += ea8500
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
+ DEVICE_TITLE := Linksys EA8500
DEVICE_PACKAGES := ath10k-firmware-qca99x0
endef
+TARGET_DEVICES += linksys_ea8500
-define Device/D7800
+define Device/netgear_d7800
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-d7800
KERNEL_SIZE := 2097152
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := d7800
+ SUPPORTED_DEVICES += d7800
DEVICE_TITLE := Netgear Nighthawk X4 D7800
DEVICE_PACKAGES := ath10k-firmware-qca99x0
endef
+TARGET_DEVICES += netgear_d7800
-define Device/DB149
- $(call Device/FitImage)
- DEVICE_DTS := qcom-ipq8064-db149
- KERNEL_INSTALL := 1
- BOARD_NAME := db149
- DEVICE_TITLE := Qualcomm DB149
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-
-define Device/EA8500
- $(call Device/LegacyImage)
- DEVICE_DTS := qcom-ipq8064-ea8500
- PAGESIZE := 2048
- BLOCKSIZE := 128k
- KERNEL_SIZE := 3072k
- FILESYSTEMS := squashfs
- KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
- PROFILES += $$(DEVICE_NAME)
- BOARD_NAME := ea8500
- UBINIZE_OPTS := -E 5
- IMAGES := factory.bin sysupgrade.tar
- IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
- DEVICE_TITLE := Linksys EA8500
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-
-define Device/FRITZ4040
- $(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-fritz4040
- KERNEL_LOADADDR := 0x80208000
- BLOCKSIZE := 4k
- PAGESIZE := 256
- BOARD_NAME := fritz4040
- DEVICE_TITLE := AVM Fritz!Box 4040
- IMAGE_SIZE := 29753344
- IMAGES = sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
-endef
-
-define Device/R7500
+define Device/netgear_r7500
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-r7500
KERNEL_SIZE := 2097152
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7500
+ SUPPORTED_DEVICES += r7500
DEVICE_TITLE := Netgear Nighthawk X4 R7500
DEVICE_PACKAGES := ath10k-firmware-qca988x
endef
+TARGET_DEVICES += netgear_r7500
-define Device/R7500v2
+define Device/netgear_r7500v2
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-r7500v2
KERNEL_SIZE := 2097152
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7500v2
+ SUPPORTED_DEVICES += r7500v2
DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
endef
+TARGET_DEVICES += netgear_r7500v2
-define Device/R7800
+define Device/netgear_r7800
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8065-r7800
KERNEL_SIZE := 2097152
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7800
+ SUPPORTED_DEVICES += r7800
DEVICE_TITLE := Netgear Nighthawk X4S R7800
DEVICE_PACKAGES := ath10k-firmware-qca9984
endef
+TARGET_DEVICES += netgear_r7800
-define Device/NBG6817
- DEVICE_DTS := qcom-ipq8065-nbg6817
- KERNEL_SIZE := 4096k
+define Device/openmesh_a42
+ $(call Device/FitImageLzma)
+ FILESYSTEMS := squashfs
+ DEVICE_DTS := qcom-ipq4019-a42
+ KERNEL_LOADADDR := 0x80208000
BLOCKSIZE := 64k
- BOARD_NAME := nbg6817
- DEVICE_TITLE := ZyXEL NBG6817
- DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs losetup
- $(call Device/ZyXELImage)
+ SUPPORTED_DEVICES := openmesh,a42
+ DEVICE_TITLE := OpenMesh A42
+ KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+ IMAGE_SIZE := 15616k
+ IMAGES = factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools ipq-wifi-openmesh_a42
endef
+TARGET_DEVICES += openmesh_a42
-define Device/VR2600v
+define Device/qcom_ap-dk01.1-c1
PROFILES += $$(DEVICE_NAME)
+ DEVICE_TITLE := QCA AP-DK01.1-C1
+ BOARD_NAME := ap-dk01.1-c1
+ DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+ KERNEL_LOADADDR := 0x80208000
+ KERNEL_INSTALL := 1
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 26624k
FILESYSTEMS := squashfs
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- KERNEL_SIZE := 2097152
- DEVICE_DTS := qcom-ipq8064-vr2600v
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := vr2600v
- DEVICE_TITLE := TP-Link Archer VR2600v
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
+ $(call Device/FitImage)
IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca4019
endef
+TARGET_DEVICES += qcom_ap-dk01.1-c1
-define Device/AP-DK04.1-C1
+define Device/qcom_ap-dk04.1-c1
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
BOARD_NAME := ap-dk04.1-c1
DEVICE_TITLE := QCA AP-DK04.1-C1
endef
+TARGET_DEVICES += qcom_ap-dk04.1-c1
+
+define Device/qcom_ipq8064-ap148
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES += ap148
+ DEVICE_TITLE := Qualcomm AP148
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+ $(call Device/LegacyImage)
+ $(call Device/UbiFit)
+ DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+ DEVICE_TITLE := Qualcomm AP148 (legacy)
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
- R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1
+define Device/qcom_ipq8064-db149
+ $(call Device/FitImage)
+ DEVICE_DTS := qcom-ipq8064-db149
+ KERNEL_INSTALL := 1
+ BOARD_NAME := db149
+ DEVICE_TITLE := Qualcomm DB149
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_c2600
+ $(call Device/TpSafeImage)
+ DEVICE_DTS := qcom-ipq8064-c2600
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := c2600
+ SUPPORTED_DEVICES += c2600
+ TPLINK_BOARD_ID := C2600
+ DEVICE_TITLE := TP-Link Archer C2600
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SIZE := 2097152
+ DEVICE_DTS := qcom-ipq8064-vr2600v
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := vr2600v
+ SUPPORTED_DEVICES += vr2600v
+ DEVICE_TITLE := TP-Link Archer VR2600v
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/zyxel_nbg6817
+ DEVICE_DTS := qcom-ipq8065-nbg6817
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 64k
+ BOARD_NAME := nbg6817
+ SUPPORTED_DEVICES += nbg6817
+ DEVICE_TITLE := ZyXEL NBG6817
+ DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
+ $(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff