lantiq: add Allnet ALL0333CJ support

[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc / board.d / 02_network

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 41d6b7fab3a3d5e01d74620880b6805413bf55ad..55498b9f596963e0ea23d8a023676ea33b0bde8d 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -18,7 +18,7 @@ lan_mac=""
 wan_mac=""
 interface_wan=""
 
-board=$(lantiq_board_name)
+board=$(board_name)
 
 case "$board" in
 ACMP252|GIGASX76X)
@@ -26,6 +26,13 @@ ACMP252|GIGASX76X)
                "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
        ;;
 
+ALL0333CJ)
+       annex="b"
+       lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0'
+       ;;
+
 ARV4510PW)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -61,6 +68,13 @@ ARV7519RW22)
                "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
        ;;
 
+ASL56026)
+       lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+       wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
+       ucidef_add_switch "switch0"\
+               "2:lan" "3:lan" "6t@eth0"
+       ;;
+
 BTHOMEHUBV2B)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
@@ -78,7 +92,7 @@ BTHOMEHUBV5A)
        lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
+               "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
 DGN3500*)
@@ -93,7 +107,16 @@ EASY80920NAND|EASY80920NOR)
                "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
+FRITZ3370)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
+       ;;
+
+FRITZ7320)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+       ;;
+
 FRITZ7360SL)
+       wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
        ucidef_add_switch "switch0" \
                "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
        ;;
@@ -112,7 +135,7 @@ P2812HNUF*)
        lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_add_switch "switch0" \
-               "0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+               "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
        ;;
 
 TDW8970|TDW8980)
@@ -137,13 +160,13 @@ VR200v)
 VGV7510KW22*)
        wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
        ucidef_add_switch "switch0" \
-               "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
+               "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
        ;;
 
 VGV7519*)
        wan_mac=$(mtd_get_mac_binary board_config 22)
        ucidef_add_switch "switch0" \
-               "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
+               "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
        ;;
 
 WBMR)
@@ -164,9 +187,8 @@ WBMR300)
 
 esac
 
-if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
        ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
-fi
 
 if lantiq_is_vdsl_system; then
        interface_wan="ptm0"