vpi=1
vci=32
annex="a"
+tone="av"
+xfer_mode=""
encaps="llc"
payload="bridged"
lan_mac=""
wan_mac=""
-interface_wan=""
+interface_wan="dsl0"
-board=$(lantiq_board_name)
+board=$(board_name)
case "$board" in
-# adm6996
-ARV4510PW)
+audiocodes,mp-252)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+ ;;
+
+allnet,all0333cj)
+ annex="b"
+ lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ucidef_set_interface_lan 'eth0'
+ ;;
+
+arcadyan,arv4510pw)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
+ "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
;;
-ARV4520PW)
+arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
ucidef_add_switch "switch0" \
- "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
+ "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
-ACMP252|GIGASX76X)
+arcadyan,arv4520pw)
+ annex="b"
ucidef_add_switch "switch0" \
- "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
-# ar8316
-ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
+arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
+ annex="b"
+ ucidef_set_interface_lan 'eth0'
+ ;;
+
+arcadyan,arv7506pw11)
+ annex="b"
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
ucidef_add_switch "switch0" \
- "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
-# rtl8306g
-ARV7519PW)
- lan_mac=$(mtd_get_mac_binary board_config 22)
- wan_mac=$(macaddr_add "$lan_mac" 1)
+arcadyan,arv7519pw)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
+ "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
;;
-WBMR)
+arcadyan,arv7519rw22)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
ucidef_add_switch "switch0" \
- "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
+ "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
;;
-VG3503J)
- ucidef_set_interface_lan 'eth0'
+arcadyan,arv752dpw22|arcadyan,arv8539pw22)
+ annex="b"
+ ucidef_add_switch "switch0" \
+ "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
;;
-ARV4518PWR01*)
- ucidef_set_interface_lan 'eth0'
- ;;
+alphanetworks,asl56026)
+ lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
+ ucidef_add_switch "switch0"\
+ "2:lan" "3:lan" "6t@eth0"
+ ;;
-DGN3500*)
- eth0_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
- nas0_mac=$(macaddr_add "$eth0_mac" 1)
- ifconfig eth0 hw ether "$eth0_mac"
- ifconfig wlan0 hw ether "$eth0_mac"
- esi $(echo "$nas0_mac" | tr -d :)
+bt,homehub-v2b)
+ lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
+ "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
;;
-GR7000)
- ucidef_set_interface_wan "eth0"
+bt,homehub-v3a)
+ lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ucidef_set_interface_lan 'eth0'
;;
-H201L)
+bt,homehub-v5a)
+ lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
+ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
-#rtl8306g
-P2601HNFX)
- ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
+netgear,dgn1000b)
+ annex="b"
+ ucidef_set_interface_lan 'eth0'
;;
-P2812HNUF*)
+netgear,dgn3500|netgear,dgn3500b)
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
-TDW8970|TDW8980)
- lan_mac=$(mtd_get_mac_binary boardconfig 61696)
+netgear,dm200)
+ lan_mac=$(mtd_get_mac_binary ART 0)
wan_mac=$(macaddr_add "$lan_mac" 1)
- ucidef_add_switch "switch0" \
- "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+ ucidef_set_interface_lan 'eth0'
;;
-VR200v)
- lan_mac=$(mtd_get_mac_binary romfile 61696)
+lantiq,easy80920-nand|lantiq,easy80920-nor)
+ lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+ "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
-ARV7519RW22)
- lan_mac=$(mtd_get_mac_binary boardconfig 22)
- wan_mac=$(macaddr_add "$lan_mac" 1)
+avm,fritz3370-rev2-hynix|\
+avm,fritz3370-rev2-micron)
+ annex="b"
+ lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+ wan_mac=$(macaddr_add "$lan_mac" 3)
ucidef_add_switch "switch0" \
- "0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
+ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
-BTHOMEHUBV2B|BTHOMEHUBV3A)
- lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
- wan_mac=$(macaddr_add "$lan_mac" 1)
+avm,fritz7320)
+ annex="b"
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
ucidef_set_interface_lan 'eth0'
;;
-BTHOMEHUBV5A)
- lan_mac=$(mtd_get_mac_binary caldata 4364)
- wan_mac=$(macaddr_add "$lan_mac" 1)
+avm,fritz7360sl)
+ annex="b"
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
+ "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
-VGV7519)
- lan_mac=$(mtd_get_mac_binary board_config 22)
+siemens,gigaset-sx76x)
+ annex="b"
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+ ;;
+
+zte,h201l)
+ annex="b"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
+ ;;
+
+zyxel,p-2601hn)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
+ ;;
+
+zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
+ lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
+ "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
+ ;;
+
+tplink,tdw8970|tplink,tdw8980)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
+ ucidef_add_switch "switch0" \
+ "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
;;
-VGV7510KW22)
- lan_mac=$(mtd_get_mac_binary board_config 22)
+arcadyan,vg3503j)
+ lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_add_switch "switch0" \
- "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+ "2:lan:1" "4:lan:2" "6t@eth0"
;;
-WBMR300)
+tplink,vr200v)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
+ ;;
+
+arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
+ annex="b"
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
+ ;;
+
+arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
+ wan_mac=$(mtd_get_mac_binary board_config 22)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+ ;;
+
+buffalo,wbmr-hp-g300h)
+ ucidef_add_switch "switch0" \
+ "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+ ;;
+
+buffalo,wbmr-300hpd)
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
wan_mac="$lan_mac"
ucidef_add_switch "switch0" \
- "2:lan:1" "3:lan:2" "5:lan:3" "4:wan:1" "6t@eth0"
+ "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
+ ;;
+
+*)
+ ucidef_set_interface_lan 'eth0'
;;
esac
-if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
- ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
-fi
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+ ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
-if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
- interface_wan="ptm0"
- ucidef_add_vdsl_modem "$annex" "av" "ptm"
+if lantiq_is_vdsl_system; then
+ ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
else
- interface_wan="nas0"
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
fi
ucidef_set_interface_wan "$interface_wan" "pppoe"
-[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan "$lan_mac"
-[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan "$wan_mac"
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
board_config_flush
exit 0
+
projects / openwrt / openwrt.git / blobdiff