lantiq: Add support for the BT Home Hub 5A

[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc / uci-defaults / 02_network

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 22dea2a321b0b65dab67a614eb172b1f48120139..6f9d9c022d71f3074f8e5ab73f5a45c48b9a4840 100644 (file)
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -120,8 +120,6 @@ VG3503J)
        ;;
 
 DGN3500*)
-       lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
@@ -145,7 +143,9 @@ P2601HNFX)
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
        ;;
 
-P2812HNUFX)
+P2812HNUF*)
+       lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan 'eth0.1'
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
@@ -154,17 +154,42 @@ P2812HNUFX)
 TDW8970)
        lan_mac=$(mtd_get_mac_binary boardconfig 61696)
        wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0.1'
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 2 4 5 6t"
        ;;
 
-ARV7519*)
+ARV7519RW22)
        lan_mac=$(mtd_get_mac_binary boardconfig 22)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ;;
 
-BTHOMEHUBV2B)
+BTHOMEHUBV2B|BTHOMEHUBV3A)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ;;
+
+BTHOMEHUBV5A)
+       lan_mac=$(mtd_get_mac_binary caldata 4364)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0.1'
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t"
+       ;;
+
+VGV7519)
+       lan_mac=$(mtd_get_mac_binary board_config 22)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ;;
+
+VGV7510KW22)
+       lan_mac=$(mtd_get_mac_binary board_config 22)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0.1'
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6t"
+       ;;
+
 esac
 
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"