lantiq: DGN3500: make switch LEDs blink on activity
[openwrt/openwrt.git] / target / linux / lantiq / dts / DGN3500.dtsi
index b9459c554e4cf91fb2e056eba28d9fb2db9a3956..d58d717537d3badaba6eca1e1681498f7b9c1ad5 100644 (file)
@@ -1,19 +1,21 @@
-/include/ "ar9.dtsi"
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
        chosen {
-               bootargs-append = "root= console=ttyLTQ0,115200";
+               bootargs = "root= console=ttyLTQ0,115200";
+       };
 
-               leds {
-                       boot = &power_green;
-                       failsafe = &power_red;
-                       running = &power_green;
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
 
-                       dsl = &dsl;
-                       internet = &internet;
-                       usb = &usb;
-                       wifi = &wifi;
-               };
+               led-dsl = &dsl;
+               led-internet = &internet;
+               led-usb = &usb;
+               led-wifi = &wifi_green;
        };
 
        memory@0 {
                                        lantiq,output = <1>;
                                        lantiq,pull = <0>;
                                };
-                               spi-in {
-                                       lantiq,pins = "io16";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
+                       };
+                       pins_spi_default: pins_spi_default {
+                               spi_in {
+                                       lantiq,groups = "spi_di";
+                                       lantiq,function = "spi";
                                };
-                               spi-out {
-                                       lantiq,pins = "io10", "io17", "io18", "io21";
-                                       lantiq,open-drain = <0>;
-                                       lantiq,pull = <2>;
+                               spi_out {
+                                       lantiq,groups = "spi_do", "spi_clk",
+                                               "spi_cs4";
+                                       lantiq,function = "spi";
+                                       lantiq,output = <1>;
                                };
                        };
                };
 
                etop@E180000 {
                        phy-mode = "mii";
-                       mac-address = [ 00 11 22 33 44 55 ];
                };
 
                ifxhcd@E101000 {
                        status = "okay";
                };
-
-               pci@E105400 {
-                       status = "okay";
-
-                       lantiq,bus-clock = <33333333>;
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
-                       gpio-reset = <&gpio 21 0>;
-                       req-mask = <0x1>; /* GNT1 */
-               };
        };
 
-       spi {
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               compatible = "spi-gpio";
-
-               gpio-miso = <&gpio 16 0>;
-               gpio-mosi = <&gpio 17 0>;
-               gpio-sck = <&gpio 18 0>;
-               num-chipselects = <1>;
-               cs-gpios = <&gpio 10 1>;
-
-               m25p80@0 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "jedec,spi-nor";
-                       reg = <0 0>;
-                       spi-max-frequency = <1000000>;
-
-                       partition@0 {
-                               reg = <0x0 0x10000>;
-                               label = "uboot";
-                               read-only;
-                       };
-
-                       partition@10000 {
-                               reg = <0x10000 0x10000>;
-                               label = "uboot-env";
-                               read-only;
-                       };
-
-                       ath9k_cal: partition@20000 {
-                               reg = <0x20000 0x10000>;
-                               label = "calibration";
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               reg = <0x50000 0xfa0000>;
-                               label = "firmware";
-                       };
-               };
+       rtl8366rb {
+               compatible = "realtek,rtl8366rb";
+               gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
+
+               realtek,initvals = <
+                       0x0000 0x0830
+                       0x0400 0x8130
+                       0x000A 0x83ED
+                       0x0F51 0x0017
+                       0x02F5 0x0048
+                       0x02FA 0xFFDF
+                       0x02FB 0xFFE0
+                       0x0450 0x0000
+                       0x0401 0x0000
+                       0x0431 0x0960
+               >;
        };
 
-       ath9k_eep {
-               compatible = "ath9k,eeprom";
-               ath,eep-flash = <&ath9k_cal 0xf000>;
-               ath,pci-slot = <14>;
-               ath,eep-endian;
-               ath,eep-swap;
-       };
 
-       rtl8366rb {
-               compatible = "rtl8366rb";
-               gpio-sda = <&gpio 35 0>;
-               gpio-sck = <&gpio 37 0>;
-       };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
 
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio 36 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio 54 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
                reset {
                        label = "reset";
-                       gpios = <&gpio 53 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
                internet: internet {
-                       label = "internet";
-                       gpios = <&gpio 2 1>;
+                       label = "dgn3500:green:internet";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+               };
+               internet2 {
+                       label = "dgn3500:red:internet";
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
                };
                dsl: dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 1>;
+                       label = "dgn3500:green:dsl";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                };
                usb: usb {
-                       label = "usb";
-                       gpios = <&gpio 22 1>;
+                       label = "dgn3500:green:usb";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
                };
                power_green: power {
-                       label = "power";
-                       gpios = <&gpio 34 1>;
+                       label = "dgn3500:green:power";
+                       gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                power_red: power2 {
-                       label = "power2";
-                       gpios = <&gpio 39 1>;
+                       label = "dgn3500:red:power";
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+               };
+               wifi_green: wifi {
+                       label = "dgn3500:green:wireless";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
-               wifi: wifi {
-                       label = "wifi";
-                       gpios = <&gpio 51 1>;
+               wifi2 {
+                       label = "dgn3500:amber:wireless";
+                       gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
                };
                wps {
-                       label = "wps";
-                       gpios = <&gpio 52 1>;
+                       label = "dgn3500:green:wps";
+                       gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@168c,0029 {
+               compatible = "pci168c,0029";
+               reg = <0x7000 0 0 0 0>;
+               qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+       };
+};
+
+&spi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       status = "ok";
+
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <20000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x10000>;
+                               label = "uboot";
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               reg = <0x10000 0x10000>;
+                               label = "uboot-env";
+                               read-only;
+                       };
+
+                       ath9k_cal: partition@20000 {
+                               reg = <0x20000 0x10000>;
+                               label = "calibration";
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               reg = <0x50000 0xfa0000>;
+                               label = "firmware";
+                       };
                };
        };
 };