lantiq: rename gphy firmware

[openwrt/openwrt.git] / target / linux / lantiq / dts / VGV7510KW22.dtsi

diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
index 0284831c193b509d360360b6ba549a697756652d..fb4486aca24d5342e0ec5122ebe3cf0ad1decb3c 100644 (file)
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi
@@ -1,19 +1,30 @@
-/include/ "vr9.dtsi"
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
-       model = "VGV7510KW22 - o2 Box 6431";
+       compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+       };
 
-               leds {
-                       boot = &power_green;
-                       failsafe = &power_red;
-                       running = &power_green;
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_green;
 
-                       dsl = &dsl;
-                       internet = &internet_green;
-                       wifi = &wifi;
+               led-dsl = &dsl;
+               led-internet = &internet_green;
+               led-wifi = &wifi;
+       };
+
+       sram@1F000000 {
+               vmmc@107000 {
+                       status = "okay";
+                       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                                        &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                                        &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
                };
        };
 
@@ -21,10 +32,6 @@
                reg = <0x0 0x4000000>;
        };
 
-       cputemp@0 {
-               compatible = "lantiq,cputemp";
-       };
-
        fpi@10000000 {
                localbus@0 {
                        nor-boot@0 {
@@ -76,18 +83,7 @@
 
                ifxhcd@E101000 {
                        status = "okay";
-                       gpios = <&gpio 47 0>;
-               };
-
-               pci@E105400 {
-                       status = "okay";
-                       lantiq,bus-clock = <33333333>;
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <
-                               0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
-                               >;
-                       gpio-reset = <&gpio 21 0>;
-                       req-mask = <0x1>;       /* GNT1 */
+                       gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
                };
 
                pcie@d900000 {
@@ -97,16 +93,11 @@
 
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
-               firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
-               firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
+               firmware1 = "lantiq/xrx200_phy22f_a14.bin";     /*VR9 1.1*/
+               firmware2 = "lantiq/xrx200_phy22f_a22.bin";     /*VR9 1.2*/
                phys = [ 00 01 ];
        };
 
-       ralink_eep {
-               compatible = "ralink,eeprom";
-               ralink,eeprom = "RT3062.eeprom";
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -115,14 +106,14 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio 6 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio 9 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
@@ -131,52 +122,66 @@
 
                dsl: dsl {
                        label = "vgv7510kw22:green:dsl";
-                       gpios = <&gpio 2 1>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };
 
                internet_red {
                        label = "vgv7510kw22:red:internet";
-                       gpios = <&gpio 10 1>;
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
                };
 
                info_red {
                        label = "vgv7510kw22:red:info";
-                       gpios = <&gpio 12 1>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
 
                power_green: power {
                        label = "vgv7510kw22:green:power";
-                       gpios = <&gpio 14 1>;
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
 
                info_green {
                        label = "vgv7510kw22:green:info";
-                       gpios = <&gpio 15 1>;
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                internet_green: internet_green {
                        label = "vgv7510kw22:green:internet";
-                       gpios = <&gpio 19 1>;
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
 
                wifi: wifi {
                        label = "vgv7510kw22:green:wlan";
-                       gpios = <&gpio 20 1>;
+                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
 
                power_red: power2 {
                        label = "vgv7510kw22:red:power";
-                       gpios = <&gpio 28 1>;
+                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                };
 
                phone {
                        label = "vgv7510kw22:green:telefon";
-                       gpios = <&gpio 29 1>;
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3592 {
+               compatible = "pci1814,3592";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
 &eth0 {
        lan: interface@0 {
                compatible = "lantiq,xrx200-pdi";
@@ -186,6 +191,12 @@
                mtd-mac-address = <&boardconfig 0x16>;
                lantiq,switch;
 
+               ethernet@0 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <0>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy1>;
+               };
                ethernet@2 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <2>;
@@ -212,23 +223,6 @@
                };
        };
 
-       wan: interface@1 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <1>;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <2>;
-               lantiq,wan;
-
-               ethernet@0 {
-                       compatible = "lantiq,xrx200-pdi-port";
-                       reg = <0>;
-                       phy-mode = "mii";
-                       phy-handle = <&phy1>;
-               };
-       };
-
        mdio@0 {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -236,7 +230,7 @@
 
                phy1: ethernet-phy@1 {
                        reg = <0x1>;
-                       compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+                       compatible = "ethernet-phy-ieee802.3-c22";
                };
 
                phy11: ethernet-phy@11 {