#include <dt-bindings/input/input.h>
/ {
- model = "VGV7510KW22 - o2 Box 6431";
+ compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
+ bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
};
aliases {
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
- firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
- firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
+ firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
+ firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
};
};
- wan: interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <3>;
- lantiq,wan;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "mii";
- phy-handle = <&phy1>;
- };
- };
-
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
phy1: ethernet-phy@1 {
reg = <0x1>;
- compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {