lantiq: rename gphy firmware

[openwrt/openwrt.git] / target / linux / lantiq / dts / VGV7519.dtsi

diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index 103a9f5a56499ed9f98c8d56f283e64aa0ea0d62..e807b527151f4c5928b61c4b50377de53da07dc4 100644 (file)
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -1,11 +1,12 @@
-/include/ "vr9.dtsi"
+#include "vr9.dtsi"
 
-/ {
+#include <dt-bindings/input/input.h>
 
-    model = "VGV7519 - KPN Experiabox V8";
+/ {
+       compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
        };
 
        aliases {
@@ -18,12 +19,17 @@
                led-wifi = &wireless_green;
        };
 
-       memory@0 {
-               reg = <0x0 0x4000000>;
+       sram@1F000000 {
+               vmmc@107000 {
+                       status = "okay";
+                       gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+                                &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+                                &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+               };
        };
 
-       cputemp@0 {
-               compatible = "lantiq,cputemp";
+       memory@0 {
+               reg = <0x0 0x4000000>;
        };
 
        fpi@10000000 {
@@ -97,24 +103,13 @@
 
                ifxhcd@E101000 {
                        status = "okay";
-                       gpios = <&gpio 32 0>;
+                       gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                        lantiq,portmask = <0x3>;
                };
 
                ifxhcd@E106000 {
                        status = "okay";
-                       gpios = <&gpio 32 0>;
-               };
-
-               pci@E105400 {
-                       status = "okay";
-                       lantiq,bus-clock = <33333333>;
-                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-                       interrupt-map = <
-                               0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
-                               >;
-                       gpio-reset = <&gpio 21 0>;
-                       req-mask = <0x1>;       /* GNT1 */
+                       gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                };
 
                pcie@d900000 {
@@ -124,16 +119,11 @@
 
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
-               firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
-               firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
+               firmware1 = "lantiq/xrx200_phy11g_a14.bin";     /*VR9 1.1*/
+               firmware2 = "lantiq/xrx200_phy11g_a22.bin";     /*VR9 1.2*/
                phys = [ 00 01 ];
        };
 
-       ralink_eep {
-               compatible = "ralink,eeprom";
-               ralink,eeprom = "RT2860.eeprom";
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -141,23 +131,23 @@
                poll-interval = <100>;
                reset {
                        label = "reset";
-                       gpios = <&gpio 9 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
                eco {
                        label = "eco";
-                       gpios = <&gpio 41 1>;
-                       linux,code = <247>;
+                       gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio 45 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio 10 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
@@ -166,64 +156,78 @@
 
                eco {
                        label = "vgv7519:blue:eco";
-                       gpios = <&stp 2 1>;
+                       gpios = <&stp 2 GPIO_ACTIVE_LOW>;
                };
                wps_red {
                        label = "vgv7519:red:wps";
-                       gpios = <&stp 3 1>;
+                       gpios = <&stp 3 GPIO_ACTIVE_LOW>;
                };
                wps_green {
                        label = "vgv7519:green:wps";
-                       gpios = <&stp 4 1>;
+                       gpios = <&stp 4 GPIO_ACTIVE_LOW>;
                };
                upgrade {
                        label = "vgv7519:blue:upgrade";
-                       gpios = <&stp 5 1>;
+                       gpios = <&stp 5 GPIO_ACTIVE_LOW>;
                };
                tv {
                        label = "vgv7519:green:tv";
-                       gpios = <&stp 6 1>;
+                       gpios = <&stp 6 GPIO_ACTIVE_LOW>;
                };
                internet_green: internet_green {
                        label = "vgv7519:green:internet";
-                       gpios = <&stp 7 1>;
+                       gpios = <&stp 7 GPIO_ACTIVE_LOW>;
                };
                internet_red {
                        label = "vgv7519:red:internet";
-                       gpios = <&stp 8 1>;
+                       gpios = <&stp 8 GPIO_ACTIVE_LOW>;
                };
                broadband_red {
                        label = "vgv7519:red:broadband";
-                       gpios = <&stp 9 1>;
+                       gpios = <&stp 9 GPIO_ACTIVE_LOW>;
                };
                broadband_green: broadband_green {
                        label = "vgv7519:green:broadband";
-                       gpios = <&stp 10 1>;
+                       gpios = <&stp 10 GPIO_ACTIVE_LOW>;
                };
                voice {
                        label = "vgv7519:green:voice";
-                       gpios = <&stp 11 1>;
+                       gpios = <&stp 11 GPIO_ACTIVE_LOW>;
                };
                wireless_red {
                        label = "vgv7519:red:wireless";
-                       gpios = <&stp 12 1>;
+                       gpios = <&stp 12 GPIO_ACTIVE_LOW>;
                };
                wireless_green: wireless_green {
                        label = "vgv7519:green:wireless";
-                       gpios = <&stp 13 1>;
+                       gpios = <&stp 13 GPIO_ACTIVE_LOW>;
                };
                power_green: power2 {
                        label = "vgv7519:green:power";
-                       gpios = <&stp 14 1>;
+                       gpios = <&stp 14 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                power_red: power {
                        label = "vgv7519:red:power";
-                       gpios = <&stp 15 1>;
+                       gpios = <&stp 15 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
+&pci0 {
+       status = "okay";
+       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+       wifi@1814,3091 {
+               compatible = "pci1814,3091";
+               reg = <0x7000 0 0 0 0>;
+               ralink,mtd-eeprom = <&boardconfig 0x410>;
+               ralink,mtd-eeprom-swap;
+               mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
+       };
+};
+
 &eth0 {
        lan: interface@0 {
                compatible = "lantiq,xrx200-pdi";
@@ -231,6 +235,7 @@
                #size-cells = <0>;
                reg = <0>;
                mtd-mac-address = <&boardconfig 0x16>;
+               mtd-mac-address-increment = <1>;
                lantiq,switch;
 
                ethernet@0 {
@@ -257,17 +262,6 @@
                        phy-mode = "gmii";
                        phy-handle = <&phy13>;
                };
-       };
-
-       wan: interface@1 {
-               compatible = "lantiq,xrx200-pdi";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <1>;
-               mtd-mac-address = <&boardconfig 0x16>;
-               mtd-mac-address-increment = <2>;
-               lantiq,wan;
-
                ethernet@5 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <5>;