lantiq: move partitions into partion table node
[openwrt/openwrt.git] / target / linux / lantiq / dts / VR200v.dts
index fb01d7f..e281042 100644 (file)
                spi-max-frequency = <33250000>;
                m25p,fast-read;
 
-               partition@0 {
-                       reg = <0x0 0x20000>;
-                       label = "u-boot";
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@20000 {
-                       reg = <0x20000 0xf90000>;
-                       label = "firmware";
-               };
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
 
-               partition@fb0000 {
-                       reg = <0xfb0000 0x10000>;
-                       label = "radioDECT";
-                       read-only;
-               };
+                       partition@20000 {
+                               reg = <0x20000 0xf90000>;
+                               label = "firmware";
+                       };
 
-               partition@fc0000 {
-                       reg = <0xfc0000 0x10000>;
-                       label = "config";
-                       read-only;
-               };
+                       partition@fb0000 {
+                               reg = <0xfb0000 0x10000>;
+                               label = "radioDECT";
+                               read-only;
+                       };
 
-               romfile: partition@fd0000 {
-                       reg = <0xfd0000 0x10000>;
-                       label = "romfile";
-                       read-only;
-               };
+                       partition@fc0000 {
+                               reg = <0xfc0000 0x10000>;
+                               label = "config";
+                               read-only;
+                       };
 
-               partition@fe0000 {
-                       reg = <0xfe0000 0x10000>;
-                       label = "rom";
-                       read-only;
-               };
+                       romfile: partition@fd0000 {
+                               reg = <0xfd0000 0x10000>;
+                               label = "romfile";
+                               read-only;
+                       };
 
-               partition@ff0000 {
-                       reg = <0xff0000 0x10000>;
-                       label = "radio";
-                       read-only;
+                       partition@fe0000 {
+                               reg = <0xfe0000 0x10000>;
+                               label = "rom";
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               reg = <0xff0000 0x10000>;
+                               label = "radio";
+                               read-only;
+                       };
                };
        };
 };