ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 83141dedd8db3aa45ec0be7fb9b7e37c651d0e30..0c97dc99bdeee640da27e11ae394280e415d7f7f 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -78,13 +78,20 @@ asl26555-16M)
 bc2)
        set_usb_led "$board:blue:usb"
        ;;
-br-6425)
-       set_wifi_led "$board:orange:wlan"
-       ;;
 broadway)
        set_usb_led "$board:red:diskmounted"
        set_wifi_led "$board:red:wps_active"
        ;;
+c108)
+       ucidef_set_led_netdev "lan" "lan" "$board:green:lan" "eth0"
+       ucidef_set_led_netdev "modem" "modem" "$board:green:modem" "wwan0"
+       ;;
+c20)
+       ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
+       set_usb_led "$board:blue:usb"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:blue:wlan2g" "wlan0"
+       ;;
 c20i)
        ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
@@ -92,7 +99,6 @@ c20i)
        ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
        ;;
 c50)
-       ucidef_set_led_default "power" "power" "$board:green:power" "0"
        ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
        set_usb_led "$board:green:usb"
@@ -164,7 +170,6 @@ dir-860l-b1)
        ;;
 ex2700|\
 wn3000rpv3)
-       ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
        set_wifi_led "$board:green:router"
        ;;
 ex3700)
@@ -183,6 +188,10 @@ fonera20n)
        set_usb_led "$board:orange:usb"
        set_wifi_led "$board:orange:wifi"
        ;;
+gb-pc1)
+       ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01"
+       ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10"
+       ;;
 gl-mt300a|\
 gl-mt300n|\
 gl-mt750)
@@ -243,6 +252,11 @@ miniembplug)
        set_wifi_led "$board:red:wlan"
        set_usb_led "$board:green:mobile"
        ;;
+mir3g)
+       ucidef_set_led_switch "wan-amber"  "WAN (amber)"  "$board:amber:wan"  "switch0" "0x02" "0x08"
+       ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$board:amber:lan1" "switch0" "0x08" "0x08"
+       ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$board:amber:lan2" "switch0" "0x04" "0x08"
+       ;;
 miwifi-mini)
        ucidef_set_led_default "power" "power" "$board:red:status" "1"
        ;;
@@ -308,6 +322,12 @@ r6220)
        set_wifi_led "$board:green:wifi"
        set_usb_led "$board:green:usb"
        ;;
+re350-v1)
+       ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$board:blue:wifi2G" "wlan0"
+       ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$board:blue:wifi5G" "wlan1"
+       ucidef_set_led_netdev "eth_act" "LAN act" "$board:green:eth_act" "eth0" "tx rx"
+       ucidef_set_led_switch "eth_link" "LAN link" "$board:green:eth_link" "switch0" "0x01"
+       ;;
 re6500)
        ucidef_set_led_default "power" "power" "$board:white:power" "1"
        ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
@@ -320,6 +340,12 @@ rt-ac51u)
        set_wifi_led "$board:blue:wifi"
        set_usb_led "$board:blue:usb" "1-1"
        ;;
+rt-n12p)
+       ucidef_set_led_default "power" "power" "$board:green:power" "1"
+       ucidef_set_led_netdev "lan" "lan" "$board:green:lan" eth0.1
+       ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
+       set_wifi_led "$board:green:air"
+       ;;
 rt-n14u)
        ucidef_set_led_default "power" "power" "$board:blue:power" "1"
        ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1
@@ -348,6 +374,19 @@ tl-wr841n-v13)
        ucidef_set_led_switch "lan4" "lan4" "$board:green:lan4" "switch0" "0x10"
        ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
        ;;
+u25awf-h1)
+       set_wifi_led "u25awf:red:wifi"
+       ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
+       ;;
+u7628-01-128M-16M)
+       ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
+       ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
+       ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
+       ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
+       ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
+       set_usb_led "u7628-01:green:usb"
+       set_wifi_led "u7628-01:green:wlan"
+       ;;
 vocore-8M|\
 vocore-16M)
        ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
@@ -356,6 +395,9 @@ vocore-16M)
 vocore2)
        set_wifi_led "$board:fuchsia:status"
        ;;
+vocore2lite)
+       set_wifi_led "$board:green:status"
+       ;;
 w502u)
        set_usb_led "$board:blue:usb"
        set_wifi_led "rt2800pci-phy0::radio"
@@ -363,6 +405,11 @@ w502u)
 wcr-150gn)
        set_usb_led "$board:amber:user"
        ;;
+we1026-5g-16m)
+       ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
+       set_wifi_led "we1026-5g:green:wifi"
+       set_usb_led "we1026-5g:green:usb" "1-1.1"
+       ;;
 whr-1166d|\
 whr-300hp2|\
 whr-600d)
@@ -429,9 +476,9 @@ zte-q7)
        set_wifi_led "$board:blue:status"
        ;;
 youku-yk1)
-       ucidef_set_led_default "power" "power" "$board:blue:power" "1"
        set_wifi_led "$board:blue:air"
        set_usb_led "$board:blue:usb"
+       ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10"
        ;;
 esac