ramips: add support for I-O DATA WN-GX300GR

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a5c51c7c8814eb835edab7d31fb5fe69c16b2d69..a9a68f6eef7ca0960f19861616f3e27d9f6a80b5 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -56,6 +56,13 @@ air3gii)
        set_wifi_led "$boardname:green:wlan"
        set_usb_led "$boardname:green:mobile"
        ;;
+alfa-network,ac1200rm)
+       set_wifi_led "$boardname:green:wlan2g" "wlan1"
+       ucidef_set_led_default "wps" "wps" "$boardname:green:wps" "0"
+       ;;
+alfa-network,awusfree1)
+       set_wifi_led "$boardname:blue:wlan"
+       ;;
 all0256n-4M|\
 all0256n-8M)
        ucidef_set_rssimon "wlan0" "200000" "1"
@@ -87,12 +94,6 @@ c108)
        ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
        ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
        ;;
-c20)
-       ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
-       ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
-       set_usb_led "$boardname:blue:usb"
-       ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
-       ;;
 c20i)
        ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
@@ -157,10 +158,17 @@ dir-615-h1)
        set_wifi_led "rt2800pci-phy0::radio"
        ;;
 dir-620-d1|\
+dlink,dwr-116-a1|\
 mzk-ex300np)
        set_wifi_led "$boardname:green:wifi"
        ;;
+dlink,dwr-921-c1)
+       set_wifi_led "$boardname:green:wifi"
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+       ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
+       ;;
 dir-810l|\
+iodata,wn-gx300gr|\
 mzk-750dhp|\
 mzk-dp150n|\
 vr500)
@@ -189,7 +197,8 @@ fonera20n)
        set_usb_led "$boardname:orange:usb"
        set_wifi_led "$boardname:orange:wifi"
        ;;
-gb-pc1)
+gnubee,gb-pc1|\
+gnubee,gb-pc2)
        ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
        ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
        ;;
@@ -245,6 +254,9 @@ kng_rc)
        set_usb_led "$boardname:green:usb"
        set_wifi_led "$boardname:green:wifi"
        ;;
+linkits7688)
+       ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
+       ;;
 m2m)
        set_wifi_led "$boardname:blue:wifi"
        ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
@@ -360,6 +372,10 @@ rt-n14u)
        set_wifi_led "$boardname:blue:air"
        set_usb_led "$boardname:blue:usb"
        ;;
+tama,w06)
+       ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+       ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+       ;;
 tew-714tru)
        set_usb_led "$boardname:red:usb"
        set_wifi_led "$boardname:green:wifi"
@@ -369,18 +385,47 @@ tiny-ac)
        set_usb_led "$boardname:green:usb"
        ;;
 tl-wr840n-v4)
-       set_wifi_led "$boardname:green:wlan"
+       ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
        ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
        ;;
 tl-wr841n-v13)
-       set_wifi_led "$boardname:green:wlan"
+       ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
        ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
        ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
        ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
        ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
        ;;
+tplink,c20-v1)
+       ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+       set_usb_led "$boardname:blue:usb"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
+       ;;
+tplink,c20-v4)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
+       ;;
+tplink,c50-v3)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+       ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
+       ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
+       ;;
+tplink,tl-mr3420-v5|\
+tplink,tl-wr842n-v5)
+       set_usb_led "$boardname:green:usb"
+       ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+       ;;
+tplink,tl-wr902ac-v3)
+       set_usb_led "$boardname:green:usb"
+       ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
+       ;;
 u25awf-h1)
        set_wifi_led "u25awf:red:wifi"
        ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
@@ -444,8 +489,7 @@ y1)
        set_usb_led "$boardname:blue:usb"
        ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
        ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
-       ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0.1" "tx rx"
-       ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
+       ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
        ;;
 y1s)
        set_usb_led "$boardname:blue:usb"
@@ -453,6 +497,11 @@ y1s)
        ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
        ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
        ;;
+youhua,wr1200js)
+       ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
+       ucidef_set_led_usbdev "usb" "USB" "$boardname:blue:usb" "1-2"
+       ucidef_set_led_default "wps" "wps" "$boardname:blue:wps" "0"
+       ;;
 zbt-ape522ii)
        ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
        ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
@@ -474,11 +523,20 @@ zbt-we826-32M)
        set_wifi_led "zbt-we826:green:wifi"
        set_usb_led "zbt-we826:green:usb"
        ;;
+zbtlink,zbt-we1226)
+       set_wifi_led "$boardname:green:wlan"
+       ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
+       ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
+       ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
+       ;;
 zbt-wr8305rt)
        ucidef_set_led_default "power" "power" "$boardname:green:sys" "1"
        set_usb_led "$boardname:green:usb"
        set_wifi_led "$boardname:green:wifi"
        ;;
+zorlik,zl5900v2)
+       ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
+       ;;
 zte-q7)
        set_wifi_led "$boardname:blue:status"
        ;;