ramips: use D-Link DIR-600 B1 image for B2 version

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a263b524a2a75e68ff2588fa160a0c468014b3db..e6664bdd988ea66aee11a9b403e8d5b023a2d791 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -4,11 +4,11 @@
 . /lib/ramips.sh
 
 set_usb_led() {
-       ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
+       ucidef_set_led_usbdev "usb" "USB" "${1}" "${2:-1-1}"
 }
 
 set_wifi_led() {
-       ucidef_set_led_netdev "wifi_led" "wifi" "$1" "wlan0"
+       ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
 }
 
 
@@ -17,6 +17,16 @@ board=$(ramips_board_name)
 board_config_update
 
 case $board in
+11acnas|\
+all0239-3g|\
+hw550-3g|\
+mofi3500-3gn|\
+sap-g3200u3|\
+sk-wb8|\
+w2914nsv2|\
+wf-2881)
+       set_usb_led "$board:green:usb"
+       ;;
 3g150b|\
 3g300m)
        set_usb_led "$board:blue:3g"
@@ -26,6 +36,9 @@ case $board in
        set_usb_led "$board:blue:3g"
        ;;
 3g-6200nl|\
+wnce2001)
+       set_wifi_led "$board:green:wlan"
+       ;;
 br-6475nd|\
 mzk-w300nh2)
        set_wifi_led "$board:amber:wlan"
@@ -42,15 +55,8 @@ air3gii)
        set_wifi_led "$board:green:wlan"
        set_usb_led "$board:green:mobile"
        ;;
-all0239-3g|\
-hw550-3g|\
-mofi3500-3gn|\
-sap-g3200u3|\
-wf-2881)
-       set_usb_led "$board:green:usb"
-       ;;
 all0256n)
-       ucidef_set_rssimon "wlan0" "40000" "1"
+       ucidef_set_rssimon "wlan0" "200000" "1"
        ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssilow" "wlan0" "1" "40" "0" "6"
        ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssimed" "wlan0" "30" "80" "-29" "5"
        ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8"
@@ -77,6 +83,20 @@ broadway)
        set_usb_led "$board:red:diskmounted"
        set_wifi_led "$board:red:wps_active"
        ;;
+c20i)
+       ucidef_set_led_switch "lan" "lan" "$board:blue:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x01"
+       set_usb_led "$board:blue:usb" "2-1"
+       ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
+       ;;
+c50)
+       ucidef_set_led_default "power" "power" "$board:green:power" "0"
+       ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+       set_usb_led "$board:green:usb"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1
+       set_wifi_led "$board:green:wlan5g"
+       ;;
 cf-wr800n)
        ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1
        set_wifi_led "$board:white:wifi"
@@ -92,13 +112,16 @@ d105)
 db-wrt01)
        ucidef_set_led_default "power" "power" "$board:orange:power" "1"
        ;;
+dch-m225)
+       ucidef_set_led_default "power" "POWER" "$board:geeen:power" "1"
+       ucidef_set_led_default "status" "STATUS" "$board:red:status" "0"
+       ;;
 dcs-930l-b1)
        ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
        ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps"
        ;;
 dir-300-b1|\
 dir-600-b1|\
-dir-600-b2|\
 dir-620-a1)
        ucidef_set_led_default "wan" "WAN LED (amber)" "$board:amber:wan" "1"
        set_wifi_led "rt2800pci-phy0::radio"
@@ -125,14 +148,22 @@ mzk-ex300np)
        ;;
 dir-810l|\
 mzk-750dhp|\
-mzk-dp150n)
+mzk-dp150n|\
+vr500)
        ucidef_set_led_default "power" "power" "$board:green:power" "1"
        ;;
+dir-860l-b1)
+       ucidef_set_led_netdev "wan" "wan" "$board:green:net" "eth0.2"
+       ;;
 ex2700)
        ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
        set_wifi_led "$board:green:router"
        ;;
-f5d8235-v1|\
+f5d8235-v1)
+       ucidef_set_led_default "lan" "lan" "$board:blue:wired" "0"
+       set_usb_led "$board:blue:storage"
+       set_wifi_led "$board:blue:wireless"
+       ;;
 f5d8235-v2)
        set_usb_led "$board:blue:storage"
        ;;
@@ -149,7 +180,7 @@ hc5661)
        ucidef_set_led_default "system" "system" "$board:blue:system" "1"
        ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
        set_wifi_led "$board:blue:wlan2g"
-       ;;      
+       ;;
 hc5761)
        ucidef_set_led_default "system" "system" "$board:blue:system" "1"
        ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
@@ -177,6 +208,12 @@ ht-tm02)
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
        set_wifi_led "$board:blue:wlan"
        ;;
+kn_rc|\
+kn_rf|\
+kng_rc)
+       set_usb_led "$board:green:usb"
+       set_wifi_led "$board:green:wifi"
+       ;;
 m2m)
        set_wifi_led "$board:blue:wifi"
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:wan" "eth0"
@@ -206,9 +243,26 @@ mr-102n)
        set_wifi_led "$board:green:wlan"
        set_usb_led "$board:green:usb"
        ;;
+mr200)
+       ucidef_set_led_default "power" "power" "$board:white:power" "1"
+       ucidef_set_led_netdev "lan" "lan" "$board:white:lan" "eth0.1"
+       ucidef_set_led_netdev "wan" "wan" "$board:white:wan" "usb0"
+       set_wifi_led "$board:white:wlan"
+       ;;
+mzk-ex750np)
+       ucidef_set_led_default "power" "power" "$board:red:power" "1"
+       set_wifi_led "$board:red:wifi"
+       ;;
 na930)
        set_usb_led "$board:blue:status"
        ;;
+nbg-419n2)
+       set_usb_led "$board:green:usb"
+       set_wifi_led "rt2800pci-phy0::radio"
+       ;;
+newifi-d1)
+       set_usb_led "$board:red:status"
+       ;;
 nw718)
        set_usb_led "$board:amber:usb"
        ;;
@@ -216,6 +270,9 @@ oy-0001)
        ucidef_set_led_default "power" "power" "$board:green:power" "1"
        set_wifi_led "$board:green:wifi"
        ;;
+pbr-d1)
+       set_usb_led "$board:orange:usb"
+       ;;
 pbr-m1)
        ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
        ucidef_set_led_default "power" "power" "$board:blue:power" "1"
@@ -224,6 +281,10 @@ pbr-m1)
 psg1208)
        set_wifi_led "$board:white:wlan2g"
        ;;
+psg1218)
+       ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
+       ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
+       ;;
 px-4885)
        set_wifi_led "$board:orange:wifi"
        set_usb_led "$board:blue:storage"
@@ -243,6 +304,10 @@ rt-n14u)
        set_wifi_led "$board:blue:air"
        set_usb_led "$board:blue:usb"
        ;;
+tew-714tru)
+       set_usb_led "$board:red:usb"
+       set_wifi_led "$board:green:wifi"
+       ;;
 tiny-ac)
        set_wifi_led "$board:orange:wifi"
        set_usb_led "$board:green:usb"
@@ -264,21 +329,42 @@ whr-600d)
        ucidef_set_led_default "power" "power" "$board:green:power" "1"
        ucidef_set_led_default "router" "router" "$board:green:router" "1"
        ;;
-wnce2001)
-       set_wifi_led "$board:green:wlan"
+wl-wn575a3)
+       ucidef_set_rssimon "wlan1" "200000" "1"
+       ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49" "0" "1"
+       ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84" "0" "1"
+       ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100" "0" "1"
        ;;
 wrh-300cr)
        set_wifi_led "$board:green:wlan"
        ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"
        ;;
+wndr3700v5)
+       ucidef_set_led_default "power" "POWER" "$board:green:power" "0"
+       ;;
 wt3020)
        ucidef_set_led_default "power" "power" "$board:blue:power" "0"
        ;;
-y1|\
+y1)
+       set_usb_led "$board:blue:usb"
+       ucidef_set_led_netdev "wifi" "WIFI" "$board:blue:wifi" "wlan1"
+       ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi5g" "wlan0"
+       ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0.1" "tx rx"
+       ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
+       ;;
 y1s)
-       ucidef_set_led_default "power" "power" "$board:blue:power" "1"
        set_usb_led "$board:blue:usb"
-       set_wifi_led "$board:blue:wifi"
+       ucidef_set_led_netdev "wifi" "WIFI" "$board:yellow:wifi" "wlan1"
+       ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi" "wlan0"
+       ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx"
+       ;;
+zbt-ape522ii)
+       ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"
+       ucidef_set_led_netdev "sys1" "wlan1" "$board:green:sys1" "wlan1" "tx rx"
+       ucidef_set_led_netdev "sys2" "wlan0" "$board:green:sys2" "wlan0" "tx rx"
+       ;;
+zbt-cpe102)
+       ucidef_set_led_default "power" "power" "$board:green:4g-0" "0"
        ;;
 zbt-wa05)
        ucidef_set_led_default "power" "power" "$board:blue:power" "1"