ramips: add support for ALFA Network Quad-E4G

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index ff8a0db6f325aa4f070a239b93c66dc047b5f387..0ffd5d6560df6598350162da7e046773cb73a873 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -33,6 +33,7 @@ ramips_setup_interfaces()
        case $board in
        11acnas|\
        d-team,newifi-d2|\
+       dir-615-h1|\
        w2914nsv2|\
        zbt-we2026)
                ucidef_add_switch "switch0" \
@@ -80,15 +81,16 @@ ramips_setup_interfaces()
        ai-br100|\
        alfa-network,ac1200rm|\
        mediatek,ap-mt7621a-v60|\
+       xzwifi,creativebox-v1|\
        d240|\
        db-wrt01|\
        dir-300-b7|\
        dir-320-b1|\
        dir-610-a1|\
-       dir-615-h1|\
        dir-810l|\
        dlink,dwr-116-a1|\
        dlink,dwr-921-c1|\
+       dlink,dwr-922-e2|\
        ew1200|\
        firewrt|\
        hc5661a|\
@@ -102,32 +104,34 @@ ramips_setup_interfaces()
        miwifi-nano|\
        mt7621|\
        mt7628|\
+       mtc,wr1201|\
        mzk-750dhp|\
        mzk-w300nh2|\
-       netgear,r6120|\
        nixcore-x1-8M|\
        nixcore-x1-16M|\
        oy-0001|\
        pbr-m1|\
        psg1208|\
        psg1218a|\
-       r6220|\
        rt-n12p|\
        sap-g3200u3|\
        sk-wb8|\
+       telco-electronics,x1|\
+       totolink,lr1200|\
        unielec,u7621-06-256m-16m|\
        unielec,u7621-06-512m-64m|\
        vr500|\
        wavlink,wl-wn570ha1|\
+       wavlink,wl-wn575a3|\
        wf-2881|\
        whr-g300n|\
        mqmaker,witi-256m|\
        mqmaker,witi-512m|\
-       wl-wn575a3|\
-       wndr3700v5|\
        youku-yk1|\
+       youku,yk-l2|\
        zbt-ape522ii|\
        zbt-we1326|\
+       zbtlink,zbt-we826-e|\
        zbtlink,zbt-we3526|\
        zbt-we826-16M|\
        zbt-we826-32M|\
@@ -138,7 +142,12 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       gehua,ghl-r-001)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
+               ;;
        alfa-network,awusfree1|\
+       alfa-network,tube-e4g|\
        cs-qr10|\
        d105|\
        dlink,dap-1522-a1|\
@@ -153,6 +162,7 @@ ramips_setup_interfaces()
        ravpower,wd03|\
        tama,w06|\
        tplink,tl-mr3020-v3|\
+       tplink,tl-wr802n-v4|\
        u25awf-h1|\
        wli-tx4-ag300n|\
        wmdr-143n|\
@@ -161,13 +171,26 @@ ramips_setup_interfaces()
        wrh-300cr)
                ucidef_set_interface_lan "eth0"
                ;;
-       dlink,dwr-118-a2)
+       alfa-network,quad-e4g|\
+       netgear,r6120|\
+       r6220|\
+       netgear,r6350|\
+       wndr3700v5)
                ucidef_add_switch "switch0" \
-                       "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+               ;;
+       alfa-network,r36m-e4g|\
+       wcr-1166ds)
+               ucidef_add_switch "switch0" \
+                       "3:lan" "4:wan" "6@eth0"
                ;;
-       mir3g)
+       dlink,dwr-118-a1)
                ucidef_add_switch "switch0" \
-                       "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
+                       "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
+               ;;
+       dlink,dwr-118-a2)
+               ucidef_add_switch "switch0" \
+                       "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
                ;;
        psg1218b)
                ucidef_add_switch "switch0" \
@@ -182,10 +205,12 @@ ramips_setup_interfaces()
                ;;
        ar670w|\
        ar725w|\
+       rakwireless,rak633|\
        rt-ac51u)
                ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
                ;;
+       belkin,f9k1109v1|\
        rt-n15|\
        wl-351)
                ucidef_add_switch "switch0" \
@@ -197,6 +222,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
                ;;
+       asus,rt-ac57u|\
        atp-52b|\
        awm002-evb-4M|\
        awm002-evb-8M|\
@@ -206,18 +232,19 @@ ramips_setup_interfaces()
        gl-mt300a|\
        gl-mt300n|\
        gl-mt750|\
-       hg255d|\
+       hilink,hlk-7628n|\
        hiwifi,hc5861b|\
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
+       mikrotik,rb750gr3|\
        mikrotik,rbm33g|\
        mzk-wdpr|\
-       rb750gr3|\
        rt-n14u|\
        skylab,skw92a|\
        tplink,c20-v4|\
        tplink,c50-v3|\
+       tplink,c50-v4|\
        tplink,tl-mr3420-v5|\
        tplink,tl-wr842n-v5|\
        tl-wr840n-v4|\
@@ -245,6 +272,7 @@ ramips_setup_interfaces()
        elecom,wrc-1167ghbk2-s|\
        elecom,wrc-2533gst|\
        elecom,wrc-1900gst|\
+       hg255d|\
        iodata,wn-ax1167gr|\
        iodata,wn-gx300gr)
                ucidef_add_switch "switch0" \
@@ -281,6 +309,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "4:lan" "6t@eth0"
                ;;
+       cudy,wr1000)
+               ucidef_add_switch "switch0" \
+                       "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+               ;;
        cy-swr1100)
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
@@ -299,11 +331,21 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch1" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
-       hc5*61|\
+       hc5661|\
+       head-weblink,hdrm200|\
        y1s)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       hc5861)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "5:wan" "6@eth0"
+               ;;
+       iodata,wn-ac1167gr|\
+       iodata,wn-ac733gr3)
+               ucidef_add_switch "switch1" \
+                       "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+               ;;
        kn_rf)
                ucidef_add_switch "switch0" \
                        "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
@@ -322,6 +364,10 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
                ucidef_set_interface_wan "usb0"
                ;;
+       hc5761)
+               ucidef_add_switch "switch0" \
+                       "1:lan" "4:lan" "0:wan" "6@eth0"
+               ;;
        mzk-dp150n|\
        vocore-8M|\
        vocore-16M)
@@ -336,6 +382,9 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
                ;;
+       dlink,dir-510l|\
+       glinet,vixmini|\
+       netgear,ex6150|\
        re350-v1)
                ucidef_add_switch "switch0" \
                        "0:lan" "6@eth0"
@@ -382,10 +431,6 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
                ;;
-       wcr-1166ds)
-               ucidef_add_switch "switch0" \
-                       "3:lan" "4:wan" "6@eth0"
-               ;;
        wcr-150gn|\
        we1026-5g-16m)
                ucidef_add_switch "switch0" \
@@ -399,16 +444,36 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:wan" "6@eth0"
                ;;
+       wiznet,wizfi630s)
+               ucidef_add_switch "switch0" \
+                       "0:wan" "3:lan" "4:lan" "6@eth0"
+               ;;
        wt3020-4M|\
        wt3020-8M)
                ucidef_add_switch "switch0" \
                        "4:lan" "0:wan" "6@eth0"
                ;;
+       xiaomi,mir3g)
+               ucidef_add_switch "switch0" \
+                       "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
+               ;;
+       xiaomi,mir3p)
+               ucidef_add_switch "switch0" \
+                       "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+               ;;
+       xiaomi,mir4a-100m)
+               ucidef_add_switch "switch0" \
+                       "4:lan:1" "2:lan:2" "0:wan" "6@eth0"
+               ;;
        zbtlink,zbt-we1226|\
        y1)
                ucidef_add_switch "switch0" \
                        "0:lan:2" "1:lan:1" "4:wan" "6@eth0"
                ;;
+       zyxel,keenetic-start)
+               ucidef_add_switch "switch0" \
+                       "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0"
+               ;;
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -432,7 +497,19 @@ ramips_setup_macs()
        wmdr-143n)
                lan_mac=$(cat /sys/class/net/eth0/address)
                ;;
-       all0239-3g|\
+       asus,rt-ac57u|\
+       vr500)
+               lan_mac=$(mtd_get_mac_binary factory 57344)
+               wan_mac=$(mtd_get_mac_binary factory 57350)
+               ;;
+       alfa-network,quad-e4g|\
+       elecom,wrc-1167ghbk2-s|\
+       elecom,wrc-2533gst|\
+       elecom,wrc-1900gst|\
+       sk-wb8)
+               wan_mac=$(mtd_get_mac_binary factory 57350)
+               ;;
+       alfa-network,r36m-e4g|\
        carambola|\
        freestation5|\
        w502u|\
@@ -446,7 +523,7 @@ ramips_setup_macs()
        dir-320-b1|\
        dir-620-a1|\
        esr-9753|\
-       freestation5|\
+       hilink,hlk-7628n|\
        hlk-rm04|\
        mpr-a1|\
        psr-680w|\
@@ -457,25 +534,32 @@ ramips_setup_macs()
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       belkin,f9k1109v1)
+               wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
+               lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
+               ;;
        br-6475nd)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(mtd_get_mac_binary devdata 7)
                ;;
        cy-swr1100|\
-       dch-m225)
-               lan_mac=$(mtd_get_mac_ascii factory lanmac)
-               ;;
        dir-645)
                lan_mac=$(mtd_get_mac_ascii nvram lanmac)
                wan_mac=$(mtd_get_mac_ascii nvram wanmac)
                ;;
+       dch-m225)
+               lan_mac=$(mtd_get_mac_ascii factory lanmac)
+               ;;
        dir-860l-b1)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
                ;;
+       dlink,dir-510l|\
        dlink,dwr-116-a1|\
+       dlink,dwr-118-a1|\
        dlink,dwr-118-a2|\
        dlink,dwr-921-c1|\
+       dlink,dwr-922-e2|\
        lava,lr-25g001)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -483,16 +567,11 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
-       edimax,br-6478ac-v2)
+       edimax,br-6478ac-v2|\
+       netgear,r6350)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 2)
                ;;
-       elecom,wrc-1167ghbk2-s|\
-       elecom,wrc-2533gst|\
-       elecom,wrc-1900gst|\
-       sk-wb8)
-               wan_mac=$(mtd_get_mac_binary factory 57350)
-               ;;
        gl-mt300n-v2|\
        whr-g300n)
                wan_mac=$(mtd_get_mac_binary factory 4)
@@ -505,6 +584,10 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-ac1167gr|\
+       iodata,wn-ac733gr3)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" -1)
+               ;;
        iodata,wn-ax1167gr|\
        iodata,wn-gx300gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
@@ -522,9 +605,6 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory_info 13)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
-       mir3g)
-               lan_mac=$(mtd_get_mac_binary Factory 0xe006)
-               ;;
        miwifi-mini)
                wan_mac=$(cat /sys/class/net/eth0/address)
                lan_mac=$(macaddr_setbit_la "$wan_mac")
@@ -551,10 +631,6 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
-       r6220)
-               wan_mac=$(mtd_get_mac_binary factory 4)
-               lan_mac=$(macaddr_add "$wan_mac" 1)
-               ;;
        rt-n56u)
                lan_mac=$(cat /sys/class/net/eth0/address)
                lan_mac=$(macaddr_setbit_la "$lan_mac")
@@ -574,10 +650,6 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
                wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
                ;;
-       vr500)
-               lan_mac=$(mtd_get_mac_binary factory 57344)
-               wan_mac=$(mtd_get_mac_binary factory 57350)
-               ;;
        w306r-v20)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 5)
@@ -605,6 +677,13 @@ ramips_setup_macs()
        wlr-6000)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
                ;;
+       xiaomi,mir3g|\
+       xiaomi,mir3p)
+               lan_mac=$(mtd_get_mac_binary Factory 0xe006)
+               ;;
+       zyxel,keenetic-start)
+               wan_mac=$(mtd_get_mac_binary factory 40)
+               ;;
        *)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)