ramips: fix Linksys RE6500 switch port mapping

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 94cf0ec7fcf3f258e278ee9da2eb61e01f442825..2dd6793476c307e7d1a3d1ff6a44b95296051c51 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -32,6 +32,11 @@ ramips_setup_interfaces()
        local board="$1"
 
        case $board in
+       11acnas|\
+       w2914nsv2)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+               ;;
        3g150b|\
        3g300m|\
        a5-v11|\
@@ -48,6 +53,8 @@ ramips_setup_interfaces()
        microwrt|\
        mpr-a2|\
        ncs601w|\
+       omega2 | \
+       omega2p | \
        timecloud|\
        w150m|\
        widora-neo|\
@@ -117,7 +124,6 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
                ;;
        asl26555|\
-       re6500|\
        rp-n53)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
@@ -228,11 +234,12 @@ ramips_setup_interfaces()
                        "0:lan" "4:lan" "6t@eth0"
                ;;
        newifi-d1)
-               ucidef_set_interface_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
-                       "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6t@eth0" "7t@eth0"
-               ucidef_add_switch "switch1" \
-                       "4:lan" "6t@eth0" "7t@eth0"
+               "1:lan:2" "2:lan:1" "4:wan" "6@eth0"
+               ;;
+       re6500)
+               ucidef_add_switch "switch0" \
+                       "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
                ;;
        rt-n56u)
                ucidef_add_switch "switch0" \
@@ -244,6 +251,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
+       vocore2)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "2:lan" "6t@eth0"
+               ;;
        f5d8235-v1|\
        tew-714tru|\
        v11st-fe|\
@@ -251,10 +262,6 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
                ;;
-       w2914nsv2)
-               ucidef_add_switch "switch0" \
-                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
-               ;;
        wcr-150gn)
                ucidef_add_switch "switch0" \
                        "0:lan" "6t@eth0"
@@ -361,6 +368,11 @@ ramips_setup_macs()
                lan_mac=$(cat /sys/class/net/eth0/address)
                lan_mac=$(macaddr_add "$lan_mac" 2)
                ;;
+       omega2|\
+       omega2p)
+               wan_mac=$(mtd_get_mac_binary factory 4)
+               lan_mac=$(mtd_get_mac_binary factory 46)
+               ;;
        oy-0001)
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)