ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f298aa47afce22144cfbdf8b134eac02ce6f2dcb..43a0e54f7388e4728b85c53d399c82234436f6a1 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -45,7 +45,9 @@ ramips_setup_interfaces()
 
        3g150b | \
        3g300m | \
+       microwrt | \
        w150m | \
+       zte-q7 | \
        all0256n | \
        all5002 | \
        all5003 | \
@@ -59,7 +61,8 @@ ramips_setup_interfaces()
                ;;
 
        3g-6200nl | \
-       mlw221)
+       mlw221 | \
+       mr-102n)
                ucidef_set_interface_lan "eth0.2"
                ;;
        mlwg2)
@@ -106,6 +109,12 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
                ;;
 
+       cf-wr800n)
+               ucidef_set_interface_lan "eth0.1"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "4 6t"
+               ;;
+
        cy-swr1100)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -242,6 +251,12 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch1" "2" "4 6t"
                ;;
 
+       wzr-agl300nh)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "switch0" "2" "0 5t"
+               ;;
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -341,6 +356,15 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
 
+       wsr-600)
+               wan_mac=$(mtd_get_mac_binary factory 4)
+               lan_mac=$wan_mac
+               ;;
+       wsr-1166)
+               local index="$(find_mtd_index "board_data")"
+               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+               lan_mac=$wan_mac
+               ;;
        *)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)