ramips: add support for Edimax RG21S

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index b4634e09285ebd8fabd9f27ce24fe9e76706b4b6..5668c1816d724513d8d856a56c4270e2c7014185 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -333,6 +333,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "4:wan" "6@eth0"
                ;;
+       edimax,rg21s)
+               ucidef_add_switch "switch0" \
+                       "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+               ;;
        gehua,ghl-r-001)
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
@@ -511,7 +515,6 @@ ramips_setup_macs()
        8devices,carambola|\
        alfa-network,w502u|\
        arcwireless,freestation5|\
-       cudy,wr1000|\
        lenovo,newifi-y1|\
        lenovo,newifi-y1s|\
        netgear,wnce2001|\
@@ -547,7 +550,6 @@ ramips_setup_macs()
        planex,vr500|\
        samknows,whitebox-v8|\
        youku,yk-l2|\
-       zbtlink,zbt-we1326|\
        zbtlink,zbt-we3526)
                wan_mac=$(mtd_get_mac_binary factory 0xe006)
                ;;
@@ -558,6 +560,7 @@ ramips_setup_macs()
        belkin,f9k1109v1)
                wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
                lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
+               label_mac=$wan_mac
                ;;
        buffalo,wcr-1166ds|\
        buffalo,wsr-1166dhp)
@@ -574,6 +577,10 @@ ramips_setup_macs()
        zyxel,keenetic-start)
                # This empty case has to be kept for devices without any MAC address adjustments
                ;;
+       cudy,wr1000)
+               wan_mac=$(mtd_get_mac_binary factory 0x2e)
+               label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+               ;;
        dlink,dch-m225|\
        samsung,cy-swr1100)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
@@ -587,6 +594,17 @@ ramips_setup_macs()
        lava,lr-25g001)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
+               label_mac=$wan_mac
+               ;;
+       dlink,dir-615-d|\
+       dlink,dir-615-h1|\
+       glinet,gl-mt300a|\
+       glinet,gl-mt300n|\
+       glinet,gl-mt750|\
+       zbtlink,zbt-wg3526-16m|\
+       zbtlink,zbt-wg3526-32m)
+               wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+               label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
                ;;
        dlink,dir-645)
                lan_mac=$(mtd_get_mac_ascii nvram lanmac)
@@ -595,6 +613,7 @@ ramips_setup_macs()
        dlink,dir-860l-b1)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
+               label_mac=$(cat /sys/class/ieee80211/phy1/macaddress)
                ;;
        dovado,tiny-ac)
                lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
@@ -609,6 +628,10 @@ ramips_setup_macs()
        netgear,r6850)
                wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
                ;;
+       edimax,rg21s)
+               lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+               wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+               ;;
        hiwifi,hc5661|\
        hiwifi,hc5661a|\
        hiwifi,hc5761|\
@@ -616,7 +639,8 @@ ramips_setup_macs()
        hiwifi,hc5861|\
        hiwifi,hc5861b|\
        hiwifi,hc5962)
-               lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
+               lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+               label_mac=$lan_mac
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
@@ -667,13 +691,24 @@ ramips_setup_macs()
        trendnet,tew-691gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
                ;;
-       xiaomi,mir3g|\
+       vocore,vocore2|\
+       vocore,vocore2-lite)
+               label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+               ;;
+       xiaomi,mir3g)
+               lan_mac=$(mtd_get_mac_binary factory 0xe006)
+               ;;
        xiaomi,mir3p)
                lan_mac=$(mtd_get_mac_binary factory 0xe006)
+               label_mac=$lan_mac
                ;;
        xiaomi,miwifi-mini)
                lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
                ;;
+       zbtlink,zbt-we1326)
+               wan_mac=$(mtd_get_mac_binary factory 0xe006)
+               label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+               ;;
        *)
                wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
                ;;
@@ -681,6 +716,7 @@ ramips_setup_macs()
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
        [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+       [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
 }
 
 board_config_update