ramips: add support for D-Link DWR-118-A2

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 5be50f48c300b6a3c2adde853447defecd09cb07..b6f70ef50d9a08f68980bfc4db74014af24f5a3b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -103,6 +103,7 @@ ramips_setup_interfaces()
        mzk-750dhp|\
        mzk-w300nh2|\
        d-team,newifi-d2|\
+       netgear,r6120|\
        nixcore-x1-8M|\
        nixcore-x1-16M|\
        oy-0001|\
@@ -156,6 +157,10 @@ ramips_setup_interfaces()
        wrh-300cr)
                ucidef_set_interface_lan "eth0"
                ;;
+       dlink,dwr-118-a2)
+               ucidef_add_switch "switch0" \
+                       "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
+               ;;
        mir3g)
                ucidef_add_switch "switch0" \
                        "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
@@ -198,6 +203,7 @@ ramips_setup_interfaces()
        gl-mt300n|\
        gl-mt750|\
        hg255d|\
+       hiwifi,hc5861b|\
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
@@ -282,6 +288,11 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       edimax,br-6478ac-v2|\
+       tplink,c2-v1)
+               ucidef_add_switch "switch1" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+               ;;
        hc5*61|\
        y1s)
                ucidef_add_switch "switch0" \
@@ -341,11 +352,6 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
-       br-6478ac-v2|\
-       tplink,c2-v1)
-               ucidef_add_switch "switch1" \
-                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
-               ;;
        tplink,tl-wr902ac-v3)
                ucidef_add_switch "switch0" \
                        "4:lan" "6@eth0"
@@ -447,10 +453,6 @@ ramips_setup_macs()
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(mtd_get_mac_binary devdata 7)
                ;;
-       br-6478ac-v2)
-               lan_mac=$(cat /sys/class/net/eth0/address)
-               wan_mac=$(macaddr_add "$lan_mac" 2)
-               ;;
        cy-swr1100|\
        dch-m225)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
@@ -464,6 +466,7 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
                ;;
        dlink,dwr-116-a1|\
+       dlink,dwr-118-a2|\
        dlink,dwr-921-c1)
                wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -471,6 +474,10 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
+       edimax,br-6478ac-v2)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               wan_mac=$(macaddr_add "$lan_mac" 2)
+               ;;
        elecom,wrc-1167ghbk2-s|\
        elecom,wrc-2533gst|\
        sk-wb8)
@@ -482,7 +489,8 @@ ramips_setup_macs()
                ;;
        hc5*61|\
        hc5661a|\
-       hc5962)
+       hc5962|\
+       hiwifi,hc5861b)
                lan_mac=`mtd_get_mac_ascii bdinfo "Vfac_mac "`
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)