ramips: add support for VoCore2

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index ecdae638f5c4e7ae6bd5d27d9f41fd21ca7ab8f0..e84a52d4a6a1c276030d55547081fb997a7ecb1b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -32,6 +32,11 @@ ramips_setup_interfaces()
        local board="$1"
 
        case $board in
+       11acnas|\
+       w2914nsv2)
+               ucidef_add_switch "switch0" \
+                       "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+               ;;
        3g150b|\
        3g300m|\
        a5-v11|\
@@ -63,6 +68,7 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0.2"
                ;;
        3g-6200n|\
+       ac1200pro|\
        ai-br100|\
        db-wrt01|\
        dir-300-b7|\
@@ -87,13 +93,9 @@ ramips_setup_interfaces()
        sk-wb8|\
        vr500|\
        wf-2881|\
-       whr-300hp2|\
-       whr-600d|\
        witi|\
        wl-wn575a3|\
        wndr3700v5|\
-       wsr-1166|\
-       wsr-600|\
        wt1520|\
        y1|\
        youku-yk1|\
@@ -105,6 +107,13 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
+       whr-300hp2|\
+       whr-600d|\
+       wsr-1166|\
+       wsr-600)
+               ucidef_add_switch "switch0" \
+                       "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
+               ;;
        ar670w|\
        ar725w|\
        rt-n15|\
@@ -125,7 +134,6 @@ ramips_setup_interfaces()
        c50|\
        dir-645|\
        dir-860l-b1|\
-       f5d8235-v1|\
        f5d8235-v2|\
        gl-mt300a|\
        gl-mt300n|\
@@ -200,11 +208,25 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       kn_rc|\
+       kn_rf)
+               ucidef_add_switch "switch" \
+                       "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+               ;;
+       kng_rc)
+               ucidef_add_switch "switch1" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
+               ;;
        mlwg2|\
        wizard8800|\
        wl-330n)
                ucidef_set_interface_lan "eth0.1"
                ;;
+       mr200)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
+               ucidef_set_interface_wan "usb0"
+               ;;
        mzk-dp150n|\
        vocore)
                ucidef_add_switch "switch0" \
@@ -222,10 +244,16 @@ ramips_setup_interfaces()
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
                ;;
        tew-691gr|\
-       tew-692gr)
+       tew-692gr|\
+       wlr-6000)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
+       vocore2)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "2:lan" "6t@eth0"
+               ;;
+       f5d8235-v1|\
        tew-714tru|\
        v11st-fe|\
        wzr-agl300nh)
@@ -315,6 +343,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       kng_rc)
+               wan_mac=$(mtd_get_mac_binary factory 28)
+               ;;
        linkits7688 | \
        linkits7688d)
                wan_mac=$(mtd_get_mac_binary factory 4)
@@ -379,6 +410,9 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_binary factory 4)
                wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
+       wlr-6000)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
+               ;;
        wsr-1166)
                local index="$(find_mtd_index "board_data")"
                wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"