Add Netgear WNCE2001 (OF version)

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / hotplug.d / firmware / 10-rt2x00-eeprom

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 03ff4f81d4c2688c5b9824ec6ba61a7ba4f48edb..5915a02ef7b9e9aa122f528e9b744561db4be26e 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -11,47 +11,113 @@ rt2x00_eeprom_extract() {
        local count=$3
        local mtd
 
-       . /etc/functions.sh
+       . /lib/functions.sh
 
        mtd=$(find_mtd_part $part)
        [ -n "$mtd" ] || \
                rt2x00_eeprom_die "no mtd device found for partition $part"
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
+       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
                rt2x00_eeprom_die "failed to extract from $mtd"
 }
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-case "$FIRMWARE" in
-"RT288X.eeprom" | \
-"RT305X.eeprom")
-       . /lib/ramips.sh
+. /lib/ramips.sh
 
-       local board=$(ramips_board_name)
+board=$(ramips_board_name)
 
+case "$FIRMWARE" in
+"soc_wmac.eeprom")
        case $board in
        dir-300-b1 | \
        dir-600-b1 | \
-       dir-600-b2)
+       dir-600-b2 | \
+       dir-615-d)
                rt2x00_eeprom_extract "devdata" 16384 272
                ;;
 
-       f5d8235v2 | \
+       dap-1350)
+               rt2x00_eeprom_extract "devdata" 0 272
+               ;;
+
+       rt-n10-plus | \
+       rt-g32-b1)
+               rt2x00_eeprom_extract "devconf" 0 272
+               ;;
+
+       f5d8235-v1 | \
+       f5d8235-v2)
+               rt2x00_eeprom_extract "u-boot" 262144 272
+               ;;
+
+       3g-6200n | \
+       3g-6200nl | \
+       3g300m | \
+       air3gii | \
+       all0239-3g | \
+       all0256n | \
+       all5002 | \
+       argus-atp52b | \
+       bc2 | \
+       br6425 | \
+       broadway | \
+       br6524n | \
+       carambola | \
+       d105 | \
+       dir-615-h1 | \
+       dir-620-a1 | \
+       esr-9753 | \
        fonera20n | \
+       rt-n13u | \
+       freestation5 | \
        hw550-3g | \
        mofi3500-3gn | \
        pwh2004 | \
+       nbg-419n | \
+       nw718 | \
+       omni-emb | \
+       omni-emb-hpm | \
+       psr-680w | \
        rt-n15 | \
+       rt-n56u | \
+       sl-r7205 | \
+       v11st-fe | \
        v22rw-2x2 | \
-       wcr150gn | \
-       whr-g300n)
+       w306r-v20 | \
+       w150m | \
+       w502u | \
+       wcr-150gn | \
+       whr-g300n | \
+       wl-330n | \
+       wl-330n3g | \
+       wl-351 | \
+       wli-tx4-ag300n | \
+       wnce2001 | \
+       wr512-3gn | \
+       wr6202 | \
+       mzk-w300nh2 | \
+       ur-326n4g | \
+       ur-336un | \
+       xdxrn502j)
                rt2x00_eeprom_extract "factory" 0 272
                ;;
 
+       wl341v3)
+               rt2x00_eeprom_extract "board-nvram" 64880 272
+               ;;
+
        *)
                rt2x00_eeprom_die "board $board is not supported yet"
                ;;
        esac
        ;;
-esac
\ No newline at end of file
+
+"rt2x00pci_1_0.eeprom")
+       case $board in
+       rt-n56u)
+               rt2x00_eeprom_extract "factory" 32768 272
+               ;;
+       esac
+       ;;
+esac