ramips: add support for D-Link DWR-116-A1/2

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / hotplug.d / firmware / 10-rt2x00-eeprom

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 5906e686a29fab697878778a7a5c34af69f556d1..67c05c9a461225dd847c6447c8123f088da01e30 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -11,8 +11,6 @@ rt2x00_eeprom_extract() {
        local count=$3
        local mtd
 
-       . /lib/functions.sh
-
        mtd=$(find_mtd_part $part)
        [ -n "$mtd" ] || \
                rt2x00_eeprom_die "no mtd device found for partition $part"
@@ -21,120 +19,54 @@ rt2x00_eeprom_extract() {
                rt2x00_eeprom_die "failed to extract from $mtd"
 }
 
+jboot_eeprom_extract() {
+       local part=$1
+       local offset=$2
+       local mtd
+
+       mtd=$(find_mtd_part $part)
+       [ -n "$mtd" ] || \
+               rt2x00_eeprom_die "no mtd device found for partition $part"
+
+       jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE  2>/dev/null || \
+               rt2x00_eeprom_die "failed to extract from $mtd"
+}
+
+rt2x00_eeprom_set_macaddr() {
+       local macaddr=$1
+
+       [ -n "$macaddr" ] || \
+               rt2x00_eeprom_die "invalid wlan mac address"
+
+       macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
+                               conv=notrunc bs=1 seek=4 count=6 2>/dev/null || \
+               rt2x00_eeprom_die "failed to write mac address to eeprom file"
+}
+
 FW="/lib/firmware/$FIRMWARE"
 [ -e "$FW" ] && exit 0
 
-. /lib/ramips.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
 
-board=$(ramips_board_name)
+board=$(board_name)
 
 case "$FIRMWARE" in
 "soc_wmac.eeprom")
        case $board in
-       asl26555 | \
-       dir-300-b1 | \
-       dir-600-b1 | \
-       dir-600-b2 | \
-       dir-610-a1 | \
-       dir-615-d)
-               rt2x00_eeprom_extract "devdata" 16384 512
+       dlink,dwr-116-a1)
+               wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
+               wifi_mac=$(macaddr_add "$wan_mac" 1)
+               jboot_eeprom_extract "config" 0xE000
+               rt2x00_eeprom_set_macaddr $wifi_mac
                ;;
-
-       dap-1350)
-               rt2x00_eeprom_extract "devdata" 0 512
-               ;;
-
-       rt-n10-plus | \
-       rt-g32-b1)
-               rt2x00_eeprom_extract "devconf" 0 512
-               ;;
-
-       f5d8235-v1 | \
-       f5d8235-v2)
-               rt2x00_eeprom_extract "u-boot" 262144 512
-               ;;
-
-       3g-6200n | \
-       3g-6200nl | \
-       3g300m | \
-       air3gii | \
-       all0239-3g | \
-       all0256n | \
-       all5002 | \
-       all5003 | \
-       argus-atp52b | \
-       awm002-evb | \
-       bc2 | \
-       br6425 | \
-       br-6475nd | \
-       broadway | \
-       br6524n | \
-       carambola | \
-       d105 | \
-       dcs-930 | \
-       dir-300-b7 | \
-       dir-320-b1 | \
-       dir-615-h1 | \
-       dir-620-a1 | \
-       dir-620-d1 | \
-       esr-9753 | \
-       f7c027 | \
-       fonera20n | \
-       rt-n13u | \
-       freestation5 | \
-       hlk-rm04 | \
-       hw550-3g | \
-       mofi3500-3gn | \
-       mpr-a1 | \
-       mpr-a2 | \
-       pwh2004 | \
-       nbg-419n | \
-       nw718 | \
-       omni-emb | \
-       omni-emb-hpm | \
-       psr-680w | \
-       rt-n15 | \
-       rt-n56u | \
-       sl-r7205 | \
-       v11st-fe | \
-       v22rw-2x2 | \
-       w306r-v20 | \
-       w150m | \
-       w502u | \
-       wcr-150gn | \
-       whr-g300n | \
-       whr-300hp2 | \
-       whr-600d | \
-       wl-330n | \
-       wl-330n3g | \
-       wl-351 | \
-       wli-tx4-ag300n | \
-       wmr300 | \
-       wnce2001 | \
-       wr512-3gn | \
-       wr6202 | \
-       mzk-w300nh2 | \
-       ur-326n4g | \
-       ur-336un | \
-       xdxrn502j | \
-       hg255d)
+       tiny-ac)
+               wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
                rt2x00_eeprom_extract "factory" 0 512
+               rt2x00_eeprom_set_macaddr $wifi_mac
                ;;
-
-       wl341v3)
-               rt2x00_eeprom_extract "board-nvram" 64880 512
-               ;;
-
        *)
-               rt2x00_eeprom_die "board $board is not supported yet"
-               ;;
-       esac
-       ;;
-
-"rt2x00pci_1_0.eeprom")
-       case $board in
-       rt-n56u | whr-600d)
-               rt2x00_eeprom_extract "factory" 32768 512
+               rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!"
                ;;
        esac
        ;;