ramips: rt305x: add support for Edimax 3G-6200N

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / hotplug.d / firmware / 10-rt2x00-eeprom

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index a1d4887ecb639dee3a3a718a9a2990d699edf140..d7542cab4d3f36671b29bc9582596c97115d7252 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -17,19 +17,20 @@ rt2x00_eeprom_extract() {
        [ -n "$mtd" ] || \
                rt2x00_eeprom_die "no mtd device found for partition $part"
 
-       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
+       dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
                rt2x00_eeprom_die "failed to extract from $mtd"
 }
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-case "$FIRMWARE" in
-"RT288X.eeprom" | \
-"RT305X.eeprom")
-       . /lib/ramips.sh
+. /lib/ramips.sh
 
-       local board=$(ramips_board_name)
+board=$(ramips_board_name)
 
+case "$FIRMWARE" in
+"RT288X.eeprom" | \
+"RT305X.eeprom" | \
+"RT3883.eeprom")
        case $board in
        dir-300-b1 | \
        dir-600-b1 | \
@@ -37,36 +38,65 @@ case "$FIRMWARE" in
                rt2x00_eeprom_extract "devdata" 16384 272
                ;;
 
+       rt-n10-plus | \
        rt-g32-b1)
                rt2x00_eeprom_extract "devconf" 0 272
                ;;
 
+       f5d8235-v1 | \
        f5d8235-v2)
                rt2x00_eeprom_extract "u-boot" 262144 272
                ;;
 
+       3g-6200n | \
+       all0256n | \
        argus-atp52b | \
        bc2 | \
        esr-9753 | \
        fonera20n | \
+       freestation5 | \
        hw550-3g | \
        mofi3500-3gn | \
        pwh2004 | \
        nbg-419n | \
        nw718 | \
        omni-emb | \
+       psr-680w | \
        rt-n15 | \
+       rt-n56u | \
+       sl-r7205 | \
+       v11st-fe | \
        v22rw-2x2 | \
+       w306r-v20 | \
+       w502u | \
        wcr-150gn | \
        whr-g300n | \
+       wl-330n | \
+       wl-330n3g | \
        wl-351 | \
-       wr512-3gn)
+       wli-tx4-ag300n | \
+       wr512-3gn | \
+       wr6202 | \
+       ur-336un | \
+       xdxrn502j)
                rt2x00_eeprom_extract "factory" 0 272
                ;;
 
+       wl341v3)
+               rt2x00_eeprom_extract "board-nvram" 64880 272
+               ;;
+
        *)
                rt2x00_eeprom_die "board $board is not supported yet"
                ;;
        esac
        ;;
+
+"rt2x00pci_1_0.eeprom")
+       case $board in
+       rt-n56u)
+               rt2x00_eeprom_extract "factory" 32768 272
+               ;;
+       esac
+       ;;
 esac