ramips: rt305x: add support for Edimax 3G-6200N

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 7a6f08537a3e236ffd3f59502af9d4e9e063e3ff..1c65b65a7249b0227c982e0989f91439ca74e63e 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -16,34 +16,37 @@ ramips_setup_interfaces()
        ucidef_set_interface_loopback
 
        case $board in
-       all0256n)
+       all0256n | \
+       wl-330n)
                ucidef_set_interface_lan "eth0.1"
                ;;
 
+       3g-6200n | \
        argus-atp52b | \
        b2c | \
        nw718 | \
+       psr-680w | \
        sl-r7205 | \
        w502u | \
        wr6202)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ;;
 
-       f5d8235-v1)
+       f5d8235-v1 | \
+       f5d8235-v2 | \
+       ur-336un)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-               ucidef_add_switch "switch0" "1" "1"
-               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
-               ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
-       f5d8235-v2)
+       v11st-fe)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
                ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
-       rt-n15)
+       rt-n15 | \
+       wl-351)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
@@ -57,22 +60,9 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 8t"
                ;;
 
-       v11st-fe)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-               ucidef_add_switch "switch0" "1" "1"
-               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
-               ucidef_add_switch_vlan "switch0" "2" "0 5t"
-               ;;
-
+       freestation5 | \
        wcr-150gn)
-               ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
-               ;;
-
-       wl-351)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-               ucidef_add_switch "switch0" "1" "1"
-               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
-               ucidef_add_switch_vlan "switch0" "2" "4 5t"
+               ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
                ;;
 
        wli-tx4-ag300n)
@@ -100,11 +90,12 @@ ramips_setup_macs()
        all0256n)
                lan_mac=$(ramips_get_mac_binary factory 40)
                ;;
-
+       3g-6200n | \
        argus-atp52b | \
        b2c | \
        f5d8235-v1 | \
        nw718 | \
+       psr-680w | \
        rt-n15 | \
        sl-r7205 | \
        wl-351)
@@ -112,6 +103,16 @@ ramips_setup_macs()
                wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
                ;;
 
+       w306r-v20)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
+               ;;
+
+       fonera20n)
+               lan_mac=$(ramips_get_mac_binary factory 40)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
        dir-300-b1 |\
        dir-300-b2 |\
        dir-600-b1)
@@ -120,6 +121,11 @@ ramips_setup_macs()
                ;;
 
        esr-9753 | \
+       ur-336un)
+               lan_mac=$(ramips_get_mac_binary devdata 16388)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
        nbg-419n | \
        wcr-150gn)
                 lan_mac=$(ramips_get_mac_binary factory 4)