ramips: DTS rework
[openwrt/openwrt.git] / target / linux / ramips / dts / DIR-610-A1.dts
index a0f41d3b82b1d2e2ded3df67f03579243d110adf..83faf00b436846953f857ca2d4bfe41086f2476e 100644 (file)
@@ -6,69 +6,6 @@
        compatible = "DIR-610-A1", "ralink,rt5350-soc";
        model = "D-Link DIR-610 A1";
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               devdata: partition@30000 {
-                                       label = "devdata";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x3b0000>;
-                               };
-                       };
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&devdata 0x4004>;
-       };
-
-       esw@10110000 {
-               status = "okay";
-               mediatek,portmap = <0x2f>;
-               mediatek,led_polarity = <0x17>;
-       };
-
-       wmac@10180000 {
-               status = "okay";
-               ralink,led-polarity = <1>;
-               ralink,mtd-eeprom = <&devdata 0x4000>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
                };
        };
 };
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0 0>;
+               linux,modalias = "m25p80";
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               devdata: partition@30000 {
+                       label = "devdata";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+       status = "okay";
+       mediatek,portmap = <0x2f>;
+       mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+       status = "okay";
+       ralink,led-polarity = <1>;
+       ralink,mtd-eeprom = <&devdata 0x4000>;
+};