ramips: enable external amplifier for D-Link DIR-810L

[openwrt/openwrt.git] / target / linux / ramips / dts / DIR-810L.dts

diff --git a/target/linux/ramips/dts/DIR-810L.dts b/target/linux/ramips/dts/DIR-810L.dts
index 9621183e07c685052eccbc2e9339275a3eb77e3c..479005fbf72c2fe5fc17107560b97125f4c7b6c2 100644 (file)
--- a/target/linux/ramips/dts/DIR-810L.dts
+++ b/target/linux/ramips/dts/DIR-810L.dts
@@ -2,47 +2,53 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
        compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
        model = "D-Link DIR-810L";
 
-       gpio-keys-polled {
+       aliases {
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_green;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_green;
+       };
+
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 2 1>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
-               power {
+               led_power_green: power {
                        label = "dir-810l:green:power";
-                       gpios = <&gpio0 9 0>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
                };
 
                wan {
                        label = "dir-810l:orange:wan";
-                       gpios = <&gpio0 12 0>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
                };
 
-               status {
+               power2 {
                        label = "dir-810l:orange:power";
-                       gpios = <&gpio0 13 0>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
                };
        };
 };
@@ -51,57 +57,62 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               factory5g: partition@50000 {
-                       label = "factory5g";
-                       reg = <0x50000 0x10000>;
-                       read-only;
-               };
-
-               partition@60000 {
-                       label = "Wolf_Config";
-                       reg = <0x60000 0x10000>;
-                       read-only;
-               };
-
-               partition@70000 {
-                       label = "MyDlink";
-                       reg = <0x70000 0x80000>;
-                       read-only;
-               };
-
-               partition@e0000 {
-                       label = "Jffs2";
-                       reg = <0xe0000 0x80000>;
-                       read-only;
-               };
-
-               partition@170000 {
-                       label = "firmware";
-                       reg = <0x170000 0x690000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       factory5g: partition@50000 {
+                               label = "factory5g";
+                               reg = <0x50000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "Wolf_Config";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               label = "MyDlink";
+                               reg = <0x70000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@e0000 {
+                               label = "Jffs2";
+                               reg = <0xe0000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@170000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x170000 0x690000>;
+                       };
                };
        };
 };
@@ -131,5 +142,18 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pa_pins>;
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&pcie0 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               mtd-mac-address = <&factory 0x28>;
+               mtd-mac-address-increment = <2>;
+       };
 };